Amperes Analogue Paging Microphone User manual

Type
User manual

This manual is also suitable for

Thank you for choosing another quality product from Amperes Electronics.
PM1000 is a simple, elegant and user friendly paging desk with built in chime, suitable for any paging installations.
This is a further refined version to cater for broader demands in various systems, among the features include
balanced audio output for long distance paging, selectable mic or line output level and improved gooseneck mic.
Please read further and we are sure that you shall find this product is an ideal solution to your system.
INSTRUCTION MANUAL
PM1000
Paging Microphone with Chime
VER 4 / 2014
PM 1000
amperes
PAGING MICROPHONE
CHIME & TALK
PUSH TO TALK
Parts Identifications
1
2
3
5
6
1. GOOSENECK MICROPHONE
This is a detachable gooseneck condenser mic and illumi-
nated ring with cardioid pick up pattern.
2. TALK SWITCH
The momentary direct talk switch activates the mic without
pre-announcement chime
4
3. CHIME AND TALK SWITCH
A 4 tone chime shall be broadcasted when the switch is
pressed once and a downward 4 tone chime follows when
the unit is switched off.
4. DRY CONTACT
When mic is active, a dry contact is available and is useful
for various applications, such as to trigger emergency ALL
CALL.
5. POWER INPUT
The unit operates using 24V DC supply. A power adaptor is
provided in the package.
6. AUDIO OUTPUT JACK
Output is balanced with either line or mic level which can
be selected from the switch located at the bottom of the
unit.
7. CHIME & MIC LEVEL CONTROL
Individual control for chime and mic output level to
suit the installation environment.
8. MIC / LINE SWITCH
Output level from the unit can be preselected with
either mic (0.775V) or line level (1.2 V ).
Application Schematic
ZONE SELECTOR
MIXER
EM PANEL
POWER AMP
OTHER SOURCES
2 CORE
2C SCREEN
PM1000
ALL CALL
ALL CALL connection from PM1000 to
Zone Selector is optional.
Select the correct PM1000 output level
when connecting it to the Mixer input.
8
7
24 V DC
M IC / LIN E
S WIT CH
MI C LIN E
TOP VIEW
REAR VIEW
BOTTOM VIEW
O
I
amperes
MX
2222
POWER
OFF SELECT
TUNER
CD
CASS
OFF
MASTER
MUSIC SOURCE
SIG IN
BASS
MAXMIN
EXT INPUT
MAX MAXMIN
SOURCE
MIN
SIG IN
CHIME MIXER TR EBLE
MAXMIN
TONE CTRL
CH5 CH6CH4
SIG INSIG IN SIG IN
MAXMIN MAXMIN MIN
CH3CH1 CH2
SIG INSIG IN
MAXMIN MAXMIN MAXMIN MAX
AUX
SIG IN
ZS 5121
FIRE
PUBLIC ADDRESS POWER AMPLIFIER
SIGNAL -40 dB
SIGNAL -10 dB
POWER
PROTECT
CLIP
PA 2480
amperes
PAGE 2
PM1000 PAGING MICROPHONE WITH CHIME
Connecting the Unit
Technical Data
System
Output impedance
Output level
Output level controls
Chime
Frequency response
S/N ratio
Indicators
Power supply
Power consumption
Output connection
Operating distance ( controls )
Max output distance (audio)
Mic Gain
Dimensions
Gooseneck mic length
Weight
Condenser mic, cardioid
Line: 470 Ohm ± 10% Mic: 33 Ohm ± 10%
Mic / Line selectable ; balanced
Chime and Mic
4 tone ( up and down )
50Hz - 8kHz (± 3dB)
80dB ± 10% @ 1kHz
Chime active, Ready to talk,
Gooseneck mic ring
24V DC
1.2W / 50 mA
1/4” stereo phone jack
100 m
300 m via 18 awg 2c screen cable
20dB ±10%
150W x 186D x 62H mm ( excl.mic )
400 mm
800 gms
PHONE JACK
Tip : +ve
Sleeve : Gnd
Ring : -ve
PIN 1-Z1
PIN 2-Z2
PIN 3-Z3
PIN 4-Z4
PIN 5-Z5
PIN 6-Z6
PIN 7-24V
PIN 8-G ND
To MX2222 Mic input ( Select mic
output level ) or
to Amplifier ( line level )
24V DC via
power adaptor or
from Main Equipment rack
Optional connection for
triggering ALL CALL
24V DC
to VC / Patch
overriding
2 core screen mic cable
Triggering Relay Trigger at ZS Zone
Selector shall activate ALL CALL as
well as a dry contact.
ZS5121
PAGE 3
PM1000 PAGING MICROPHONE WITH CHIME
Warranty Conditions
Disclaimer
AMPERES ELECTRONICS SDN BHD
MADE IN MALAYSIA
Published : June 2014
ISO 9001: 2008
Design & Manufacture of Public Address Equipment and Systems
Certicate No. 16895 / A / 0001 / UK / En
Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes
Electronics Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn
Bhd at 70 Jalan Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor,
Malaysia or its authorized master distributor, TNT Links Sdn Bhd / MyPA Systems Sdn Bhd. This warranty is
not valid if repairs are performed by unauthorized personnel or service centres.
This warranty covers only repairs and replacement of defective parts ; cost and risks of transportation as
well as removal and installation of the product from the main system are for the account of the purchaser.
This warranty shall not extend to the replacement of the unit.
This warranty does not cover damages caused by misuse, neglect, accident of the product as well as using
the product with power supply voltage other than shown on the product, or any other power supply source /
adaptor not recommended by the manufacturer.
This warranty does not cover damages caused by fire, earthquakes, floods, lightning and every cause not
directly related to the unit.
This warranty does not include any indemnity in favor of the purchaser or the dealer for the period out of use
of the unit; moreover the warranty does not cover any damages which may be caused to people and things
when using the product.
This warranty certificate is valid only for the described product, and is not valid if modifications are made on
this certificate or on the identification label applied on the product.
This warranty covers all the material and manufacturing defects and is valid for a period of 12 months from
the date of purchase or for a longer period in countries where this is stated by a national law. In this case,
the extension is valid only in the country where the product is purchased.
Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products under warranty if
the design changes or improvements are made.
Information contained in this manual is subject to change without prior notice and does not represent a
commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD shall not be liable for any
loss or damages whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all services and repairs on this product be carried out by AMPERES ELECTRONICS
SDN BHD or its authorized service agents.
AMPERES series must only be used for the purpose they were intended by the manufacturer and in
conjunction with this operating manual.
AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or damages
caused by service, maintenance or repair by unauthorized personnel, or by use other than that intended by
the manufacturer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Amperes Analogue Paging Microphone User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI