Architectural Mailboxes 7507Z Installation guide

Type
Installation guide

This manual is also suitable for

Decorative Post Cover (Model 7506)
Assembly Instructions
Thank you for purchasing this premium mailbox accessory item. We know you’ll be satisfied
with the years of service it will provide. If you have any questions about how to mount or use
this post, or if you need any replacement parts, please call us directly at (800) 464-7491 or
contact us at www.architecturalmailboxes.com.
© 2006, Architectural Mailboxes
Tools
Hardware
Install the 3” Round Post (item 7505) as
described in the instructions that came with
the post. The Decorative Post Cover is
attached after the Post is installed.
1
2
Rev. B
Attach the Decorative Post Cover to the post as shown
using the 4 screws. Make sure to partially screw in all
screws before tightening them to help align the two halves
of the post cover. DO NOT twist or move the cover on the
post after it is tightened - this may scratch the post.
This step can be performed before or after the mailbox is
attached to the top of the post.
The Decorative Post Cover rests against the ground and
does not require any further attachment to the post or any
other part.
www.architecturalmailboxes.com (800) 464-7491
ARCHITECTURAL MAILBOXES
This product is for use with the 3” Round Post (item 7505) only.
Phillips head
screwdriver
(not included)
screws x 4
pads x 4
Optional: If desired,
attach the self-adhesive
rubber pads to the cover
or to the post where the
two parts meet to prevent
rattling or rubbing.
  • Page 1 1

Architectural Mailboxes 7507Z Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI