American Standard 7522.055 User manual

Type
User manual

This manual is also suitable for

M30
© 2008 AS America Inc.
Revised 8/05
To Be Specied:
Gooseneck Spout: 7522.055
Knee Action Mixing Valve: 7676.029
Grid Drain: 7716.020
Trap:
Nipple:
Painted Bracket Support: 485742-600 (2 reqd)
Flex Tempered Supply (by others):
SURGEON’S
SCRUB SINK
VITREOUS CHINA
SURGEON’S SCRUB SINK
Vitreous china
Low front rim
Wall hanger
For wall hanger (included) or for
exposed bracket support [381mm (15")
painted brackets available]
9047.044 Faucet holes on 203mm (8") centers
9047.093 Single center faucet hole (Illustrated)
Nominal Dimensions:
711 x 559mm
(28" x 22")
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
Available in White Only
NOTES:
*
DIMENSION SHOWN FOR LOCATION OF “P” TRAP IS SUGGESTED.
15" PAINTED SUPPORT BRACKETS 485742-600 AVAILABLE AND MUST
BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
356mm
(14)
FINISHED WALL
1-1/2 O.D.
TAILPIECE
FINISHED FLOOR
711mm
(28)
914mm
(36)
356mm
(14)
T-7F HANGER
559mm
(22)
MIXING VALVE BODY
254mm
(10)
305mm
(12)
425mm
(16-3/4)
140mm
(5-1/2)
445mm
(17-1/2)
76mm
(3)
146mm
(5-3/4)
292mm
(11-1/2)
73mm
(2-7/8)
1-1/2 N.P.T..
WASTE OUTLET
127mm
(5)
C
L
76mm
(3)
76mm
(3)
76mm
(3)
C/L OF 3/8 N.P.T.
SUPPLIES
381mm (15) BRACKETS (485742-600)
TO BE ORDERED SEPARATELY
133mm
(5-1/4)
C/L OF
TEMP.
SUPPLY
25mm
(1)
*
457mm
(18)
  • Page 1 1

American Standard 7522.055 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI