Aquasana AQ-4000P Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Installation Instructions
AQ-4000 Countertop Water Filter
White, Black, and Brushed Steel finishes
Welcome to the Aquasana experience. You are about to enjoy clean, healthy water and the
peace of mind that comes from knowing award-winning filter technology is working for you.
Installation must comply with state and local laws.
By jpruss at 2:15 pm, May 16, 2013
Contents
Filter unit with snap-on cover
Faucet diverter valve and hose
assembly (1 included, either
Standard or Premium)
Threaded cartridge caps
(A & B) and “O” rings
pre-installed in filter unit
Brass faucet adapters
(2 sizes), rubber washers* and
install tool (not included in or
covered by the system certification)
Filter cartridges (A & B) pre-
installed in filter unit
(Model no. AQ-4035)
Stop! Does your faucet have a pullout sprayer?
Unfortunately, Aquasana drinking water filters do not fit
on these faucets. In order to have filtered water in your
home, please consider our Under Counter filter with a
faucet that matches your decor!
The AQ-4000 is available in three finishes with two diverter valve styles
(Premium style diverter shown in front)
Model: AQ-4000
Replacement cartridge: AQ-4035
Rated service flow: 0.5 gpm
Max working pressure: 80 psi (5.62 kg/cm)
Min working pressure: 20 psi (1.40 kg/cm)
Max operating temp: 90° F (32.2° C)
Min operating temp: 40° F (4.44° C)
Max capacity: 450 gallons
Do not use with water that is microbiologically unsafe or of unknown water quality
without adequate disinfection before or after the system. Systems certified for cyst
reduction may be used on disinfected waters that may contain filterable cysts.
System tested and certified by NSF
International against NSF/ANSI
Standard 42 and 53 for the reduction of
the claims specified on the Performance
Data Sheet and at www.nsf.org.
System tested and certified by WQA
against NSF/ANSI 42 and 53 for the
reduction of the claims specified on the
Performance Data Sheet.
AQ-4000 in white finish with standard diverter valve shown
Push the hoses
into the filter.
2.
Turn on the diverter
valve, flush the filter for
10 min and enjoy!
3.
Remove your aerator
and attach the diverter
valve in its place.
(Use included brass adapter if required.)
Easy to install
1.
White
(A-cap)
A - White cap
B - Blue cap
For the first 72 hours, the faucet diverter valve will drip intermittently, until the filters
become fully saturated. Once they are saturated you should anticipate a residual flow of
water each time you use the filter, as the system is vented and designed to clear the line.
Turn on cold water.
Pull pin on diverter valve for
clean water. Turn water o when
done. If pull pin does not retract,
push pin in once water is o.
(Standard diverter shown. For Premium
diverter models, press paddle in to turn on,
pull out for o.)
Precautions:
Aquasana is not liable for consequential or incidental damages due to improper installation.
• Filter is only to be used with cold water.
• Never use this system on constant-pressure
applications such as ice makers or drinking
fountains.
• If the faucet diverter valve does not t, you will
need to install one of the brass faucet adapters
before attaching it. The brass faucet adapters can
be tightened using the install tool. (if the supplied
brass faucet adapters do not fit you can obtain the
right size from your local hardware store. Be sure
to bring your aerator and diverter valve to find the
perfect match.)
• Make sure the rubber washer is in place inside the
chrome swivel collar on the diverter valve.
• If you experience a leak at the hose connection,
disconnect and re-seat the hose.
* Supplied brass faucet adapters and seals are not
included in or covered by the system certification.
Your filter comes pre-assembled with cartridges you won’t
need to change for six months, or 450 gallons.
Operating
Pure Satisfaction
All Aquasana products oer a 90-day 100% satisfaction guarantee. (A 1-year warranty is included, which
covers defects in materials and workmanship.) If for any reason you are not satisfied with your purchase,
simply call us, or the dealer you purchased from, for a Return Authorization Code and a full refund will be
promptly issued upon return. Thank you for choosing Aquasana!
Don’t Void Your Warranty:
This filter system is designed and tested for use with genuine Aquasana parts including replacement filters
and all hardware (diverter valve). Use of parts from other manufacturers may result in loss of contaminant
reduction performance, system damage or failure. Use of parts from other manufacturers will also void
your warranty. Please visit aquasana.com for all replacement parts.
aq4000_install_20130514
Aquasana, Inc.
6310 Midway Road
Haltom City, TX 76117
866.662.6885 USA
877.332.7873 Canada
aquasana.com
For exclusive deals
facebook.com/aquasana
twitter.com/aquasana
-
1
-
2
-
3
-
4
-
5
Aquasana AQ-4000P Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Aquasana THD-4000W Installation guide
-
Aquasana AQ-4000 Installation guide
-
Aquasana AQ-4035 Owner's manual
-
-
Aquasana AQ-5300.56 User manual
-
-
-
Aquasana AQ-5300 Owner's manual
-
-
