B27
© 2008 AS America Inc.
COLONY
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T375.128 Colony BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T375.248 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Colony SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead. L
ESS
Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water
savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on
diverter spout. Available with lever or metal lever handle.
Available in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
T375.128 Bath/Shower Trim Shown
• Showerhead with 1.5gpm/5.7L.min. flow restrictor.
T375.128 Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
T375.248 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Polished
Chrome
002
R110
R110SS
Rough Valve Body less trim. Direct Sweat inlets/outlets.
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R115
R115SS
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R117
R117SS
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops.
TRIM KITS *
Product
Number
Description
ROUGH VALVE BODIES
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
Meets the American Disabilities
Act Guidelines and ANSI
A117.1 Requirements for the
physically challenged.
PRODUCT FEATURES:
Flowise Water Saving Showerhead: Saves up to 40% in
water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. 2 piece design allows valve to
be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Shall feature a cast brass body. Shall
feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure
balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety
stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model #
T37_.____.____.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
PEX (STOPS) (R117SS)
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
149 mm
(5-7/8")
165mm
(6-1/2")
THREADED (R115)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
SWEAT (R110)
VALVE BODY OPTIONS
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R117)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
102mm
(4")
REF.
178mm
(7") REF.
171mm
(6-3/4")
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
B28
© 2008 AS America Inc.
COLONY
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T375.128 Colony BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T375.248 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Colony SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead. L
ESS
Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water
savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on
diverter spout. Available with lever or metal lever handle.
Available in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
T375.128 Bath/Shower Trim Shown
• Showerhead with 1.5gpm/5.7L.min. flow restrictor.
T375.128 Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.248 Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
Finish Options
Product
Number
Description
T375.248 Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.
T372.128 Shower Only Trim Kit. Lever Handle. FloWise Showerhead. LESS Valve Body.
Polished
Chrome
002
R110
R110SS
Rough Valve Body less trim. Direct Sweat inlets/outlets.
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R115
R115SS
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R117
R117SS
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops.
TRIM KITS *
Product
Number
Description
ROUGH VALVE BODIES
* TRIM & ROUGH MUST BE ORDERED SEPARATELY.
Meets the American Disabilities
Act Guidelines and ANSI
A117.1 Requirements for the
physically challenged.
PRODUCT FEATURES:
Flowise Water Saving Showerhead: Saves up to 40% in
water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. 2 piece design allows valve to
be tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate. Shall feature a cast brass body. Shall
feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure
balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety
stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model #
T37_.____.____.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
PEX (STOPS) (R117SS)
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
149 mm
(5-7/8")
165mm
(6-1/2")
THREADED (R115)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
SWEAT (R110)
VALVE BODY OPTIONS
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R117)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
102mm
(4")
REF.
178mm
(7") REF.
171mm
(6-3/4")
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
B1
© 2008 AS America Inc.
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
MODEL NUMBER:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
PRODUCT FEATURES:
Cast Brass Valve Body: Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard: Plaster guard is designed to
protect valve during installation and serve as a mounting plate
for thin-wall installations. 2 piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back
installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to
mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R11____, Trim Kit - American Standard Model # ____.____.
GENERAL DESCRIPTION:
Cast brass body, washerless ceramic disc valve cartridge
with back-to-back capability and hot limit safety stop. Cycles
from "off" to "cold" to "hot". Pressure balancing cartridge
maintains constant output temperature in response to
changes in relative hot and cold supply pressure. One-half
inch inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in plaster
guard designed for use as thin-wall mounting adaptor. Valve
body will accept a variety of decorative Bath/Shower trims.
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1/2"
NPT
1/2"
COPPER
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
PEX (STOPS) (R117SS)
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
149 mm
(5-7/8")
165mm
(6-1/2")
THREADED (R115)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
SWEAT (R110)
VALVE BODY OPTIONS
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
See reverse for available trim kits.
R110 Valve Body Shown
Ho
t
C
o
ld
O
ff
Available Trim Kits
Colony
Enfield
Hampton
Town Square
Amarilis
Tropic
Dazzle
Standard
One
O
f
f
Ho
t
H
OF
F
R110
Direct
Sweat
Inlets/
Outlets
R115
Female
Thread
Inlets/
Outlets
R117
PEX
Inlets/Direct
Sweat
Outlets
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R110SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R117SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710 (valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead with FloWise
®
showerhead
NOTES:
*** ENFIELD available with lever or cross handle
T345.000
T342.000
T341.000
B/S
Shower
Valve
TRIM KITS
*
**
T375.XXX
T372.XXX
T371.XXX
T038.502
T038.501
T038.500
T215.7XX
T212.7XX
T211.7XX
T028.502
T028.501
T028.500
T6181
T6180
T6179
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T555.502
T555.501
T555.500
***
1880mm
(74")
FOR HEAD
CLEARANCE
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
25mm
(1")
102mm
(4") REF.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R117)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
B2
© 2008 AS America Inc.
UPGRADABLE
PRESSURE BALANCE BATH/SHOWER FITTING
TEMPERATURE CONTROL VALVE
• Showerhead with 2.5gpm/9.5L.min. flow restrictor.
R110
R110
Direct
Direct
Sweat
Sweat
Inlets/
Inlets/
Outlets
Outlets
R115
R115
Female
Female
Thread
Thread
Inlets/
Inlets/
Outlets
Outlets
R117
R117
PEX
PEX
Inlets/Direct
Inlets/Direct
Sweat
Sweat
Outlets
Outlets
R115SS
R115SS
Female Thread
Female Thread
Inlets/Outlets
Inlets/Outlets
w/ Screwdriver
w/ Screwdriver
Stops
Stops
R110SS
R110SS
Direct Sweat
Direct Sweat
Inlets/Outlets
Inlets/Outlets
w/ Screwdriver
w/ Screwdriver
Stops
Stops
R117SS
R117SS
PEX
PEX
Inlets/Direct
Inlets/Direct
Sweat Outlets
Sweat Outlets
w/ Screwdriver
w/ Screwdriver
Stops
Stops
VALVES
VALVES
Valve + Trim:
Valve + Trim:
Trim Kit & Valve Body Packaged Separately
Trim Kit & Valve Body Packaged Separately
To order:
To order:
Specify valve body
Specify valve body
and
and
trim kit desired
trim kit desired
Example:
Example:
R110 - Direct Sweat Valve Body
R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
10080604020
Metal
Lever
441
Perfume
Bottle
431
Metal
Cross
551
Metal
Lever
541
Lexington
901
**** AMARILIS
**** AMARILIS
trim kits are less handles--must be ordered separately.
trim kits are less handles--must be ordered separately.
the following handle kits are available:
the following handle kits are available:
Porcelain
Lever
710
Cross
Handle
520
Lever
Handle
500
Metal
Cross
720
Metal
Lever
730
** HAMPTON
** HAMPTON
available with choice of three handles.
available with choice of three handles.
to order: specify the three digit handle number
to order: specify the three digit handle number
ex) T211.710
ex) T211.710
(valve only trim kit w/ porcelain lever handle)
(valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead
* COLONY with 2.5 showerhead
with FloWise
with FloWise
®
showerhead
showerhead
NOTES:
NOTES:
*** ENFIELD available with lever or cross handle
*** ENFIELD available with lever or cross handle
Lever
Handle
120
Metal
Lever Handle
240
Lever
Handle
128
Metal
Lever Handle
248
T345.000
T345.000
T342.000
T342.000
T341.000
T341.000
B/S
B/S
Shower
Shower
Valve
Valve
TRIM KITS
TRIM KITS
Colony
*
Hampton
**
**
T375.XXX
T375.XXX
T372.XXX
T372.XXX
T371.XXX
T371.XXX
T038.502
T038.502
T038.501
T038.501
T038.500
T038.500
T215.7XX
T215.7XX
T212.7XX
T212.7XX
T211.7XX
T211.7XX
T028.502
T028.502
T028.501
T028.501
T028.500
T028.500
T6181
T6181
T6180
T6180
T6179
T6179
T064.502
T064.502
T064.501
T064.501
T064.500
T064.500
T373.5X2
T373.5X2
T373.5X1
T373.5X1
T373.5X0
T373.5X0
T555.502
T555.502
T555.501
T555.501
T555.500
T555.500
Standard
OneTown Square
Enfield
***
***
Dazzle
O
f
f
H
o
t
Tropic
H
O
F
F
Amarilis****
B3
© 2008 AS America Inc.
TRIM KITS
FOR TEMPERATURE CONTROL VALVES
Trim Kit
Finishes
Roughing-In Dimensions
Trim Kits for R110, R110SS, R115, R115SS, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow.
TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
T375.120 BATH/SHOWER Trim Kit
T372.120 SHOWER ONLY Trim Kit
T371.120 VALVE ONLY Trim Kit
.002 Polished Chrome
.002 Polished Chrome
• Wall escutcheon
• Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Slip-on Diverter tub spout
T375.240 SAME AS ABOVE
• With Metal lever handle
T372.240 SAME AS ABOVE
• With Metal lever handle
T371.240 SAME AS ABOVE
• With Metal lever handle
• Wall escutcheon
• Lever handle
• "Easy Clean" Showerhead
• Shower arm and flange
• Wall escutcheon
• Lever handle
Model #
Description
COLONY
COLONY
WITH
FLOWISE
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
178mm
(7") REF.
171mm
(6-3/4")
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
178mm
(7") REF.
171mm
(6-3/4")
R110
Direct
Sweat
Inlets/
Outlets
R115
Female
Thread
Inlets/
Outlets
R117
PEX
Inlets/Direct
Sweat
Outlets
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R110SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R117SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710 (valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead with FloWise
®
showerhead
NOTES:
*** ENFIELD available with lever or cross handle
T345.000
T342.000
T341.000
B/S
Shower
Valve
TRIM KITS
*
**
T375.XXX
T372.XXX
T371.XXX
T038.502
T038.501
T038.500
T215.7XX
T212.7XX
T211.7XX
T028.502
T028.501
T028.500
T6181
T6180
T6179
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T555.502
T555.501
T555.500
***
T038.502 BATH/SHOWER Trim Kit
• Metal Lever handle
• Brass wall escutcheon
• Showerhead, arm and flange
• Slip-on Diverter tub spout
T375.128 BATH/SHOWER Trim Kit
• Wall escutcheon
• Lever handle
•
Water Saving FloWise
®
Showerhead
• Angle adjustable
• Showerhead, arm and flange
• Diverter tub spout
• Less valve
T372.128 BATH/SHOWER Trim Kit
• Wall escutcheon
• Lever handle
•
Water Saving FloWise
®
Showerhead
• Angle adjustable
• Showerhead, arm and flange
• Less valve
T375.248 SAME AS ABOVE
• Metal Lever handle
T372.248 SAME AS ABOVE
• Metal Lever handle
T038.501 SHOWER ONLY Trim Kit
• Metal Lever handle
• Brass wall escutcheon
• Showerhead, arm and flange
T038.500 SHOWER ONLY Trim Kit
• Metal Lever handle
• Brass wall escutcheon
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
TROPIC
108mm
(4-1/4) REF.
152mm
(6) REF.
194mm
(7-5/8)
19mm to 60mm
(3/4 to 2-3/8)
457mm
(18")
OPTIONAL
194mm
(7-5/8)
143mm
(5-5/8)
38mm
(1-1/2)
102mm
(4)
H
C
O
F
F
FINISHED WALL
TOP OF TUB RIM
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
1/2" NPT
1/2" COPPER
B4
© 2008 AS America Inc.
TRIM KITS
FOR TEMPERATURE CONTROL VALVES
38mm
(1-1/2)
Model #
Description
Trim Kit Finishes
Roughing-In Dimensions
STANDARD
DAZZLE
FINISHED
WALL
102mm
(4)
102mm
(4)
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74)
FOR HEAD
CLEARANCE
130mm
(5-1/8)REF.
57mm - 83mm
(2-1/4 - 3-1/4)
41mm - 83mm
(1-5/8 - 3-1/4)
457
(18)
OPTIONAL
143mm
(5-5/8)
REF.
194mm
(7-5/8)
194mm
(7-5/8)
25mm
(1)
191mm
(7-1/2) REF.
Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min.
maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
T6181 BATH/SHOWER Trim Kit
T6180 SHOWER ONLY Trim Kit
T6179 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Porcelain lever handle
• 5" adjustable showerhead
• Cast brass diverter tub spout
with I.P.S. connection
• Metal wall escutcheon
• Porcelain lever handle
• 5" adjustable showerhead
• Metal wall escutcheon
• Porcelain lever handle
T6181
T6181S
Polished Chrome
Satin
Nickel (PVD)
T6180
T6180S
Polished Chrome
Satin
Nickel (PVD)
T6179
T6179S
Polished Chrome
Satin
Nickel (PVD)
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
127mm
(5) REF.
197mm
(7-3/4)REF.
18" OPTIONAL
135mm
(5-5/16) REF.
1/2" NPT
1/2" NPT
203mm
(8)
TOP OF TUB RIM
Off
Hot
American Standard
O
ff
Hot
.002
.068
.295
T028.502 BATH/SHOWER Trim Kit
T028.500 VALVE ONLY Trim Kit
Polished Chrome
Blackened Bronze (PVD)
Satin Nickel (PVD)
• Metal Lever Handle
• Brass wall escutcheon
• Showerhead, arm and flange
• Slip-on diverter tub spout
• Metal Lever Handle
• Brass wall escutcheon
• Showerhead, arm and flange
• Metal Lever Handle
• Brass wall escutcheon
T028.501 SHOWER ONLY Trim Kit
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin Nickel (PVD)
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin Nickel (PVD)
R110
Direct
Sweat
Inlets/
Outlets
R115
Female
Thread
Inlets/
Outlets
R117
PEX
Inlets/Direct
Sweat
Outlets
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R110SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R117SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710 (valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead with FloWise
®
showerhead
NOTES:
*** ENFIELD available with lever or cross handle
T345.000
T342.000
T341.000
B/S
Shower
Valve
TRIM KITS
*
**
T375.XXX
T372.XXX
T371.XXX
T038.502
T038.501
T038.500
T215.7XX
T212.7XX
T211.7XX
T028.502
T028.501
T028.500
T6181
T6180
T6179
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T555.502
T555.501
T555.500
***
.002
.068
.099
.221
.295
.297
.299
Polished Chrome
Blackened Bronze (PVD)
Polished Brass (PVD)
Satin (PVD)/Pol. Chrome mix.
Satin Nickel (PVD)
Satin/Brass (PVD) mix.
Pol. Chrome/Brass (PVD) mix.
.002
.099
.295
Polished Chrome
Polished Brass (PVD)
Satin Nickel (PVD)
T215.7XX BATH/SHOWER Trim Kit
• Brass wall escutcheon
• Adjustable brass Showerhead
• Shower arm and flange
• Slip-on diverter tub spout
Metal Lever Handle Finishes
Porcelain Lever,
Metal Cross Handle Finishes
T212.7XX SHOWER ONLY Trim Kit
• Brass wall escutcheon
• Adjustable brass Showerhead
• Shower arm and flange
T211.7XX VALVE ONLY Trim Kit
• Brass wall escutcheon
HAMPTON
H
o
t
C
o
l
d
O
ff
38mm
(1-1/2)
FINISHED
WALL
102mm
(4)
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74)
FOR HEAD
CLEARANCE
57mm - 83mm
(2-1/4 - 3-1/4)
457
(18)
OPTIONAL
130mm
(5-1/8)
REF.
194mm
(7-5/8)
194mm
(7-5/8)
127 mm REF.
(5") REF.
178 mm REF.
(7") REF.
710
Porcelain*
Lever
720
Metal Cross
730
Metal Lever
HAMPTON HANDLE OPTIONS
Hampton available with choice of 3 handles.
To order: specify the 3 digit handle number.
eg: T211.710 = Hampton Valve Only Trim Kit with Porcelain Lever Handle
B5
© 2008 AS America Inc.
Model # DescriptionTrim Kit Finishes Roughing-In Dimensions
Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min.
maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY.
R110
Direct
Sweat
Inlets/
Outlets
R115
Female
Thread
Inlets/
Outlets
R117
PEX
Inlets/Direct
Sweat
Outlets
R115SS
Female Thread
Inlets/Outlets
w/ Screwdriver
Stops
R110SS
Direct Sweat
Inlets/Outlets
w/ Screwdriver
Stops
R117SS
PEX
Inlets/Direct
Sweat Outlets
w/ Screwdriver
Stops
VALVES
Valve + Trim: Trim Kit & Valve Body Packaged Separately
To order: Specify valve body and trim kit desired
Example: R110 - Direct Sweat Valve Body
T215.710 - Hampton Bath/Shower Trim Kit (Porcelain Lever Handle)
**** AMARILIS
trim kits are less handles--must be ordered separately.
the following handle kits are available:
** HAMPTON
available with choice of three handles.
to order: specify the three digit handle number
ex) T211.710 (valve only trim kit w/ porcelain lever handle)
* COLONY with 2.5 showerhead with FloWise
®
showerhead
NOTES:
*** ENFIELD available with lever or cross handle
T345.000
T342.000
T341.000
B/S
Shower
Valve
TRIM KITS
*
**
T375.XXX
T372.XXX
T371.XXX
T038.502
T038.501
T038.500
T215.7XX
T212.7XX
T211.7XX
T028.502
T028.501
T028.500
T6181
T6180
T6179
T064.502
T064.501
T064.500
T373.5X2
T373.5X1
T373.5X0
T555.502
T555.501
T555.500
***
TOWN SQUARE
51mm
(2) REF.
102mm
(4)
25mm
(1)
1880mm
(74)
FOR HEAD
CLEARANCE
457
(18)
OPTIONAL
T555.502 BATH/SHOWER Trim Kit
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin
Nickel (PVD)
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin
Nickel (PVD)
.002
.068
.295
Polished Chrome
Blackened Bronze (PVD)
Satin
Nickel (PVD)
T555.501 SHOWER ONLY Trim Kit
T555.500 VALVE ONLY Trim Kit
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
•4 1/2" Rain showerhead
• Cast brass diverter tub spout
with I.P.S. connection
• Metal wall escutcheon
• Metal lever handle
• Cast brass shower arm
•4 1/2" Rain showerhead
• Metal wall escutcheon
• Metal lever handle
FINISHED WALL
BOTTOM OF TUB
1/2" I.P.S.
1
194mm
(7-5/8)
194mm
(7-5/8)
TOP OF
TUB RIM
1/2" NPT
184mm
(7-1/4 REF.)
41mm to 83mm
(1-5/8 TO 3-1/4)
203mm
(8) REF.
ONE
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
.002
.295
Polished Chrome
Satin Nickel (PVD)
T064.502 BATH/SHOWER Trim Kit
T064.501 SHOWER ONLY Trim Kit
T064.500 VALVE ONLY Trim Kit
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• Cast brass diverter tub spout
• LESS Valve
• Brass wall escutcheon
•Adjustable “3 function”
showerhead
• LESS Valve
• Brass wall escutcheon
• LESS Valve
102mm
(4)
FINISHED
WALL
1880mm
(74)
FOR HEAD
CLEARANCE
457
(18)
OPTIONAL
143mm
(5-5/8)
REF.
BOTTOM OF TUB
1/2" NPT
1/2" NPT
184mm
(7-1/4" DIA.)
TOP OF
TUB RIM
13mm
(1/2 MAX.)
41mm to 83mm
(1-5/8 TO 3-1/4)
143mm
(5-5/8) REF.
206mm
(8-1/8) REF.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
American Standard T372.128 User manual
- Category
- Sanitary ware
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard One T064.501 User manual
-
-
-
-
American Standard R110SS User manual
-
-
-
-
-
