FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• Metal construction with a chrome plated or
decorative polished brass finish
• Single handle, pressure balancing, four port,
cycle valve with integral check stops and adjustable
temperature limit stop
• Includes showerhead, arm, flange, and tub filler spout
• 1/2" CC connections
OPERATION
• Knob style handle, Pull-on push-off design
• Temperature operates through an 180° arc
of handle travel (full cold to full hot)
• Adjustable temperature limit stop to control
maximum hot water temperature
• Pressure balancing mechanism maintains selected
discharge temperature to ± 3°.
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) Max
CARTRIDGE
• 1225 cartridge design
• Accommodates back to back installations
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to meet CSA B-125, ASSE 1016,
ASME A112.18.1M, and all applicable requirements
referenced therein
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
LEGEND
®
MOENTROL
®
Single-Handle Tub/Shower Valve
Models: 3285, 3285P*
*Discontinued 2/1/97
7" (178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
KNOB
HANDLE
5-1/2"
(140mm)
WALL
OPENING
ESCUTCHEON
FLOOR
L
C
7-1/2" MIN.
(191mm)
H/A/F
TUB
FILLER
4-1/2"
(114mm)
TUB RIM
H
C
HC
6'-6"
(1981mm)
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-9/16" (65mm) MAX.
1-15/16" (49mm) MIN.
1-1/4" (32mm)
Rev. 8/05
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
