American Standard T064.600 User manual
- Category
- Sanitary ware
- Type
- User manual
B15
© 2008 AS America Inc.
ONE
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
T064.602 Shown with R116SS
MODEL NUMBER:
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool “thumping”. Avoids failure
due to mineral deposits - ideal for use with hard water.
Built-in Diverter: Easy to use, integrated in valve body
and includes positive shut-off. Allows spout and
showerhead in any desired installation location.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. threaded 1/2" NPT
inlets/outlets with screwdriver stops.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless
ceramic disc valve
cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American
R116SS Pressure Balance Rough Valve Body
With Built-in Diverter & Screw Driver Stops.
LESS Trim.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Shower
Spout
10080604020
R116SS
Pressure Balance Rough Valve Body w/Built-in Diverter & Screw Driver Stops. LESS Trim.
T064.602
Bath/Shower Trim Kit. LESS Valve.
T064.600
Valve only Trim Kit. LESS Valve.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
Product
Number
Description
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
PVD
Satin Nickel
295
Finish Options
Polished
Chrome
002
T064.600 Valve Only Trim Kit
With Built-in Diverter
• Brass wall escutcheon
• LESS Valve
T064.602 Bath/shower Trim Kit
With Built-in Diverter
• Brass wall escutcheon with built-in diverter
• Adjustable “3 function” Showerhead
• Brass tub spout
• LESS Valve
Showerhead has
2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable
brass wall escutcheon. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adapter. Brass tub spout.
Standard Model # R116SS with T064.___.___ trim kit.
5-5/8" REF.
THREADED INLETS (STOPS)
INLETS
1/2" NPT
5-5/8"
1-3/4"
OUTLETS 1/2" NPT
5-5/8"
1-5/8" TO 3-1/4"
BOTTOM OF
TUB
74" FOR
HEAD CLEARANCE
1/2" NPT
FINISHED WALL
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
80'' AND 86'
8-1/8" REF.
4"
6-3/4"
1/2" NPT
1/2" REF.
18"
OPTIONAL
"SEE
ILLUSTRATION"
TOP OF
TUB RIM
SHW
TUB
7-1/4" D.
2-3/8"
N/A N/A
PRESSURE BALANCE BATH/SHOWER
B16
© 2008 AS America Inc.
ONE
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
T064.602 Shown with R116SS
MODEL NUMBER:
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Pressure Balancing Valve: Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool “thumping”. Avoids failure
due to mineral deposits - ideal for use with hard water.
Built-in Diverter: Easy to use, integrated in valve body
and includes positive shut-off. Allows spout and
showerhead in any desired installation location.
Adjustable Hot Limit Safety Stop: Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. threaded 1/2" NPT
inlets/outlets with screwdriver stops.
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless
ceramic disc valve
cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American
R116SS Pressure Balance Rough Valve Body
With Built-in Diverter & Screw Driver Stops.
LESS Trim.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Shower
Spout
10080604020
R116SS
Pressure Balance Rough Valve Body w/Built-in Diverter & Screw Driver Stops. LESS Trim.
T064.602
Bath/Shower Trim Kit. LESS Valve.
T064.600
Valve only Trim Kit. LESS Valve.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
Product
Number
Description
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
PVD
Satin Nickel
295
Finish Options
Polished
Chrome
002
T064.600 Valve Only Trim Kit
With Built-in Diverter
• Brass wall escutcheon
• LESS Valve
T064.602 Bath/shower Trim Kit
With Built-in Diverter
• Brass wall escutcheon with built-in diverter
• Adjustable “3 function” Showerhead
• Brass tub spout
• LESS Valve
Showerhead has
2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable
brass wall escutcheon. Metal lever handle. Rough-in
plaster guard designed for use as thin-wall mounting
adapter. Brass tub spout.
Standard Model # R116SS with T064.___.___ trim kit.
5-5/8" REF.
THREADED INLETS (STOPS)
INLETS
1/2" NPT
5-5/8"
1-3/4"
OUTLETS 1/2" NPT
5-5/8"
1-5/8" TO 3-1/4"
BOTTOM OF
TUB
74" FOR
HEAD CLEARANCE
1/2" NPT
FINISHED WALL
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
80'' AND 86'
8-1/8" REF.
4"
6-3/4"
1/2" NPT
1/2" REF.
18"
OPTIONAL
"SEE
ILLUSTRATION"
TOP OF
TUB RIM
SHW
TUB
7-1/4" D.
2-3/8"
N/A N/A
PRESSURE BALANCE BATH/SHOWER
-
1
-
2
American Standard T064.600 User manual
- Category
- Sanitary ware
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard T372.128 User manual
-
-
-
-
-
-
-
-
-
