Page is loading ...
M-607-EC,03/17 Page 1 of 4
EN, FR
Vantage Technology
Panel Mount Receptacles
AF/SF, GB/SB, and GD/SD Series
Installation Information
Identification of Principal Parts
MOUNTING TAB
AF / SF
Control Series
FACTORY
SEALED
FACTORY
SEALED
GB / SB and GD /SD
Power Series
COUPLING THREADS
THREADED
ENVIRONMENTAL
COVER
2
4G
1
3
GASKET
MOUNTING
HOLES (4X)
MOUNTING THREADS
SEE DIMENSION TABLE BELOW
Assembly Notes
1. In the event of breaking of sealing compound, receptacle must be returned to factory
for resealing. Otherwise, all manufacturing and third party certifications are void.
2. Check dimension table above for mounting hole sizes and locations.
3. Use the receptacle cover mounting tab to prevent cover from being lost while
receptacle is in use. Caution: To prevent shock hazard the receptacle cover must be
threaded onto receptacle when receptacle is not in use. Attention: Pour empêcher le
risque de choc, remplacez la couverture de réceptacle quand pas en service.
4. Use non conductive lubricant when assembling back shell hardware.
M-607-EC,03/17 Page 2 of 4
EN, FR
RECAPITULATION
OF EQUIPMENT MARKINGS
AF/SF CONTROL SERIES
HAZARDOUS LOCATIONS
CATALOG NUMBER
FOR USE WITH PLUG
MFG CODE
CLASS I, GROUPS C & D
CUS
CLASS II, DIV. 2, GROUPS F & G
FACTORY SEALED RECEPTACLE ASSEMBLY
VANTAGE TECHNOLOGY
ENGLEWOOD, COLORADO 80110, USA
CAUTION: TO PREVENT SHOCK HAZARD THE RECEPTACLE COVER
MUST BE REPLACED UPON REMOVING PLUG FROM RECEPTACLE
DO NOT SEPARATE WHEN ENERGIZED
NE PAS OUVRIR SOUS TENSION
AMPS
LISTED RECEPTACLE
60/400 Hz
Ex d IIC, T6
Class I Zone 1
AEx d IIC, T6
VAC
HAZARDOUS LOCATIONS
CATALOG NUMBER
FOR USE WITH PLUG
MFG CODE
CLASS I, GROUPS C & D
CUS
CLASS II, DIV. 2, GROUPS F & G
FACTORY SEALED RECEPTACLE ASSEMBLY
VANTAGE TECHNOLOGY
ENGLEWOOD, COLORADO 80110 , USA
CAUTION: TO PREVENT SHO CK HAZARD THE RECEPTACLE COVER
MUST BE REPLACED UPON R EMOVING PLUG FROM RECEPTACLE
DO NOT SEPARATE WHEN ENERGIZED
NE PAS OUVRIR SOUS TENSION
AMPS
LISTED RECEPTACLE
60/400 Hz
Ex d IIC, T6
Class I Zone 1
AEx d IIC, T6
VAC
RECAPITULATION
OF EQUIPMENT MARKINGS
GB/SB AND GD/SD POWER SERIES
2
4G
1
3
HAZARDOUS LOCATIONS
CATALOG NUMBER
FOR USE WITH PLUG
MFG CODE
CUS
FACTORY SEALED LISTED RECEPTACLE ASSEMBLY
VANTAGE TECHNOLOGY
ENGLEWOOD, COLORADO 80110, USA
CAUTION: TO PREVENT SHOCK HAZARD THE RECEPTACLE COVER
MUST BE REPLACED UPON REMOVING PLUG FROM RECEPTACLE.
KEEP COVER TIGHT WHILE CIRCUITS ARE ALIVE.
DO NOT SEPARATE WHEN ENERGIZED
NE PAS OUVRIR SOUS TENSION
AMPS
Ex d IIC, T6
Class I Zone 1
AEx d IIC, T6
CLASS 1, DIV 2, GROUPS C & D
CSA
600 Vac
60/
400 Hz
UL
480 Vac
CSA ALSO CLASS II, DIV 2, GROUPS F&G
643A
L
U
®LISTED
HAZARDOUS LOCATIONS
CATALOG NUMBER
FOR USE WITH PLUG
MFG CODE
CUS
FACTORY SEA LED LISTED RECEPT ACLE ASSEMBLY
VANTAGE TECHN OLOGY
ENGLEWOOD, COLORADO 80110, USA
CAUTION: TO PREVENT SHOCK HAZARD THE REC EPTACLE COVER
MUST BE REPLACED UPON REMOVING PLUG FROM RECEPTACLE.
KEEP COVER TIGH T WHILE CIRCUITS ARE ALIVE.
DO NOT SEPARATE WHEN ENERGIZED
NE PAS OUVRIR SOUS TENSION
AMPS
Ex d IIC, T6
Class I Zone 1
AEx d IIC, T6
CLASS 1, DIV 2, GROUPS C & D
CSA
600 Vac
60/
400 Hz
UL
480 Vac
CSA ALSO CLASS II, DIV 2, GROUPS F&G
643A
L
U
®LISTED
Reference Product Data Sheets for the nameplate data of your PMR receptacle.
Control Series: PDF-AF-SF-PMR
Power Series: PDF-GD-SD-PMR
M-607-EC,03/17 Page 3 of 4
EN, FR
"G" SQ
'F' SQ
PANEL MOUNT RECEPTACLE
MOUNTING DIMENSIONS
45° ANGLE ADAPTER AND GASKET (OPTIONAL)
3
4G
1
2
4G
1
3
2
COVER ADDS .8 INCHES (20.3mm)
TO DIMENSIONS "A" AND "B"
3.531
(89.7mm)
Receptacle
GD-B1716-23SL
-L36 Shown
ØC
E THREAD SIZE
BA
36" (914.4 mm)
STANDARD LENGTH
ØD
ØJ
ØK
L
NOTE: THE CUTOUT DIMENSION "J" INCLUDES
0.0625" (1.6mm) RECEPTACLE SHELL CLEARANCE.
ØH (4X)
Dimensions
Dimensions for Panel Mount Receptacle
Shell
Size
A INCHES
(mm)
B INCHES
(mm)
C INCHES
(mm)
D INCHES
(mm)
THREAD ‘E’
G-16UN
AF/SF
GD/SD
16
4.063 (103.2)
3.063 (77.8)
1.969 (50.0)
3.063 (77.8)
2
20
4.063 (103.2)
3.063 (77.8)
2.469 (62.7)
3.563 (90.5)
2 ½
24
4.063 (103.2)
3.063 (77.8)
2.969 (75.4)
4.188 (106.4)
3 1/8
28 4.063 (103.2) 3.063 (77.8) 3.469 (88.1) 4.688 (119.1) 3 5/8
GB/SB
GDU/SDU
16 5.063 (128.6) 4.063 (103.2) 1.969 (50.0) 3.063 (77.8) 2
20
5.063 (128.6)
4.063 (103.2)
2.469 (62.7)
3.563 (90.5)
2 ½
24
5.063 (128.6)
4.063 (103.2)
2.969 (75.4)
4.188 (106.4)
3 1/8
28
5.063 (128.6)
4.063 (103.2)
3.469 (88.1)
4.688 (119.1)
3 5/8
M-607-EC,03/17 Page 4 of 4
EN, FR
Voice 303-761-2121
FAX 281-445-7404
E-mail support@VantageXP.com
Web Site www.VantageXP.com
4140 World Houston Pkwy, Ste 130
Houston, Texas 77032, USA
Note: Electrical installation shall be in compliance with the National Electric Code
(NEC), EN/IEC60079-14, and/or any other presiding local or national electrical code.
Maintenance and Inspection
1. When conditions require, lubricate coupling threads with silicone oil, Vantage Part
Number VT-9400-21D.
2. Periodically inspect plug to insure that the integrity of the sealing compound is intact.
3. Periodically inspect receptacle for excessive wear. Consult Vantage with any
questions regarding repair or replacement.
CABLE AND ENCLOSURE ASSEMBLIES
Factory Assembly of Connectors and Cable
If your connector(s) arrived pre-assembled to cable and/or other third-party
components, consider the following:
1. Follow the instructions and recommended maintenance practices for
the attachment plug and/or receptacle.
2. Review the useage instructions on the connector nameplate.
3. For European ATEX applications, in the potentially explosive atmosphere,
the unterminated end of an integrally mounted cable shall be terminated
in a suitable junction box, e.g. in type of protection flameproof
enclosures "d" or increased safety "e".
/
