Page 1/2
ITEM NO: I262-316 Credenza/Console
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
Slide Doors
Guide Pin
Release Button
Adjust here to adjust
the roller up or down
Roller
DOWNUP
INSTALL THE SLIDE DOORS:
Push the guide pins down so they are inside the door. Place the roller on the metal track so the
door rolls smoothly. Place the top of the door underneath the track so when you push the release
button the pins go up in to the track as shown below.
REMOVE THE SLIDE DOORS(if necessary):
Press and lower the release buttons on the back of the door to lower the guide pins as shown
below. Then remove the door.
COMPONENTS LIST:
No.
1
2
Description Sketch Quantity
Credenza/Console
Slide Door-Left 1 PC
01-21-2021
2 Slide Door-Right 1 PC
1 PC
Slide Door-Right
Slide Door-Left
FUNCTIONALITY INSTRUCTION
Flip down keyboard tray
Flip down keyboard tray
Leveler on legs & support leg
Adjust the leveler
when necessary
If you prefer to adjust the shelf
location, remove the screws and
move shelf brackets to the
desired location. Then secure the
brackets to shelf with screws.
Press here to release
Hook latch
Metal plate
Page 2/2
ITEM NO: I262-316 Credenza/Console
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
01-21-2021
-
1
-
2
aspenhome I262-316 Assembly Instructions
- Type
- Assembly Instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I540-297 Assembly Instructions
-
-
-
-
-
-
-
-
-
