Fibaro FGMS-001 User guide

Brand: Fibaro

Model: FGMS-001

Type: User guide

This manual is also suitable for

FGMS-001 ZW5

Fibaro FGMS-001 is a versatile smart home device that combines multiple sensors and features to enhance your home's automation and security. With its integrated temperature, light, motion, and accelerometer sensors, this device offers comprehensive monitoring and control capabilities. Whether you want to automate lighting based on motion or temperature, detect movement for security purposes, or simply monitor the room's conditions, the Fibaro FGMS-001 has you covered.

Fibaro FGMS-001 is a versatile smart home device that combines multiple sensors and features to enhance your home's automation and security. With its integrated temperature, light, motion, and accelerometer sensors, this device offers comprehensive monitoring and control capabilities. Whether you want to automate lighting based on motion or temperature, detect movement for security purposes, or simply monitor the room's conditions, the Fibaro FGMS-001 has you covered.

INSTRUCTION MANUAL

MOTION SENSOR

FIBARO SYSTEM

Technical support

Should youneed any assistance in connecting or conﬁguring your Home Center, please use our guides

and technical presentations which can be found on our website:

http://www.ﬁbaro.com/en/support

AccelerometerTemperature sensor

Motion sensor Light sensor

Functional features

Download FIBARO app for smartphone

Start the device

Open the casing by turning

it clockwise.

Take off the casing.

STEP 1

STEP 2

Start the device

The device will blink red.

Remove the battery blocker

“I’m ready”.

STEP 3

Check if the battery is

placed correctly.

STEP 4

Your Motion Sensor is ready to be added

to the Home Center.

Motion Sensormust be in range of the Home Center because it requires

a direct communication with the controller.

Start inclusion mode

Start your FIBARO application.

Go to Settings.

STEP 5

STEP 7

STEP 6

Start inclusion mode

Press “Next”.

Press “add device”.

Inclusion mode has been launched

Add your device

Quickly, triple click the button in order

to add your device to the system.

STEP 8

Processing your congurations

Wake up the device

Sometimes waking up the device is not required

so it will be omitted automatically.

Quickly, triple click the button

in order to wake up the device.

STEP 9

The device has been added

Name the device

and assign it to the room.

STEP 10

Network range test

STEP 11

Hold the button for a few

seconds until LED

diode blinks violet.

It is recommended to check if the device’s destination

is in range of your Home Center.

STEP 12

Release the button,

and press it again.

The quality of the network range will be

indicated by different

colours of the LED diode.

Press the button in order

to leave testing mode.

STEP 13

Direct

communication

Routed

communication

Limited

communication

No signal! The device

will not work correctly!

Network range test – quality indicator

Installation

Close the casing.

Dots on the casing will show that

the device is closed correctly.

During the installation it is recommended to wake up the device.

STEP 14

Install the sensor’s holder

in desired location.

Installation

Motion Sensor’s range.

STEP 15

Insert the Motion Sensor

in its holder.

STEP 16

Motion Sensor’s light signals

Sabotage alarm

LED will ﬂash in alarm mode (red-blue-white colours).

Motion

Everytime the movement is

detected, Motion Sensor

will glow in different

colour depending on the

temperature and user’s

conﬁgurations.

www.ﬁbaro.com

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

Fibaro FGMS-001 User guide

Brand: Fibaro

Model: FGMS-001

Type: User guide

This manual is also suitable for

FGMS-001 ZW5

Fibaro FGMS-001 is a versatile smart home device that combines multiple sensors and features to enhance your home's automation and security. With its integrated temperature, light, motion, and accelerometer sensors, this device offers comprehensive monitoring and control capabilities. Whether you want to automate lighting based on motion or temperature, detect movement for security purposes, or simply monitor the room's conditions, the Fibaro FGMS-001 has you covered.

Related papers

Other documents

Z-Wave Fibaro Keyfob Scene Controller Owner's manual