Fibaro FGWPE-102 | FGWPF-102 User guide

FGWPE-102 | FGWPF-102

Brand: Fibaro

Model: FGWPE-102 | FGWPF-102

Type: User guide

This manual is also suitable for

FGWP-102

Fibaro FGWPE-102 | FGWPF-102 is a smart wall plug that allows you to control and monitor your home appliances remotely using the FIBARO app. It features power consumption metering, energy consumption history, remote control, and Z-Wave network testing. With this device, you can easily turn on/off appliances, check their energy usage, and even test the strength of your Z-Wave network. Installation is simple – just plug it into a power outlet and pair it with your Fibaro Home Center.

Fibaro FGWPE-102 | FGWPF-102 is a smart wall plug that allows you to control and monitor your home appliances remotely using the FIBARO app. It features power consumption metering, energy consumption history, remote control, and Z-Wave network testing. With this device, you can easily turn on/off appliances, check their energy usage, and even test the strength of your Z-Wave network. Installation is simple – just plug it into a power outlet and pair it with your Fibaro Home Center.

INSTRUCTION MANUAL

FIBARO SYSTEM

WALL PLUG

Technical support

Should youneed any assistance in connecting or conﬁguring your Home Center, please use our guides

and technical presentations which can be found on our website:

http://www.baro.com/en/support

Power consumption

metering

Energy consumption

history

Functional features

Controlled remotely Z-Wave network

tester

Download FIBARO app for smartphone

Your Wall Plug is ready to be added

to the Home Center.

Wall Plugmust be in range of the Home Center because it requires

a direct communication with the controller.

Start inclusion mode

Go to Settings.

STEP 1

STEP 3

STEP 2

Start inclusion mode

Press “Next”.

Press “add device”.

Inclusion mode has been launched

Add your device

Insert the device

in the power outlet.

STEP 4

Once the Plug is turned on,

the LED ring will glow red.

It is recommended to use the socket located possibly the closest

from the Home Center.

Processing your congurations

Name the device and

assign it to the room.

STEP 5

The device has been added

Insert the device

in the power outlet.

STEP 6

Installation

If the LED ring glows green, it means

that the device has been added

successfully to the Home Center.

If the LED ring glows red, it means that the

device has not been added successfully

to the Home Center. System conﬁguration

needs to be repeated.

Network range test

It is recommended to check if the device’s destination

is in range of your Home Center.

STEP 7

Hold the button for a few

seconds until LED ring

blinks violet.

STEP 8

Release the button,

and press it again.

Network range test will be activated.

LED ring will indicate the quality

of the network range.

Press the button in order

to leave testing mode.

STEP 9

Direct

communication

Routed

communication

Limited

communication

No signal! The device

will not work correctly!

Network range test – quality indicator

Wall Plug data available in the energy

usage overview panel.

The energy usage panel is available in FIBARO app for tablet, PC and MAC.

www.ﬁbaro.com

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Fibaro FGWPE-102 | FGWPF-102 User guide

FGWPE-102 | FGWPF-102

Brand: Fibaro

Model: FGWPE-102 | FGWPF-102

Type: User guide

This manual is also suitable for

FGWP-102

Fibaro FGWPE-102 | FGWPF-102 is a smart wall plug that allows you to control and monitor your home appliances remotely using the FIBARO app. It features power consumption metering, energy consumption history, remote control, and Z-Wave network testing. With this device, you can easily turn on/off appliances, check their energy usage, and even test the strength of your Z-Wave network. Installation is simple – just plug it into a power outlet and pair it with your Fibaro Home Center.

Related papers

Other documents

Z-Wave Fibaro Keyfob Scene Controller Owner's manual