Greenland Gardener 105981 Operating instructions

1. Pick a level location that will get

a lot of sunshine. Lay weed fabric

or newspaper on the ground to keep

weeds from growing.

2. Unpack your Greenland

Gardener

™

kit. Lay the boards and

corners out where you want to

build your garden.

KIT CONTAINS:

4 - planks

4 - corners

3. Connect 1 board to 1 connector, sliding

the board into connector suggested to put

grooved side in. Repeat to completion.

4. Fill bed with dirt and use rake to

level off soil.

5. Make hole and start planting.

Cover hole with dirt and gently

water throughly.

Gardening Tips:

Sow directly in garden when danger of frost passed. If you start your

seeds in cool weather be sure to watch the weather and cover your

garden with cover of plastic or blanket at night. Soil must be kept

moist during germination, do not let the soil dry out. Also in heavy

rains cover beds if seed were just planted to avoid washing them away

from the hole. Any comments, questions or concerns please visit us at:

www.greenlandgardener.com.

4 BOARD SET-UP KIT

INSTRUCTIONS