Episode ESS-SUB-ENC-RET-SGL8 Installation guide

Episode
Brand
Episode
Model
ESS-SUB-ENC-RET-SGL8
Type
Installation guide

This manual is also suitable for

INSTALLATION MANUAL
ESS-SUB-SNGL-8
ESS-SUB-ENC-RET-SGL8
ESS-SUB-ENC-IWIC-PCO
ESS-SUB-ENC-IW-PCON
page | 2
snapav.com Support 866.838.5052
page | 3
© 2019 Episode®
INTRODUCTION
Thank you for purchasing Episode® Signature speakers. Episode is one
of the most highly-regarded brands of speakers available today. We
appreciate your business and we stand committed to providing our
customers with the highest degree of quality and service in the industry.
For optimal system performance, we recommend pairing them with our
acclaimed Episode Signature speakers and Episode Subwoofer Amplifiers..
To complete installation, follow these guidelines.
SETUP
Subwoofer Placement
The placement and configuration of the subwoofer can affect its
performance. All rooms are different and the strongest output will likely
occur if you place your subwoofer in the front of the room or on the same
wall or ceiling as your front channel / distributed speakers.
Keep subwoofers about 2 feet away from corners and other surfaces that
might interfere with or reflect sound, such as tall furniture.
CUTOUT DIMENSIONS
Refer to the chart below to verify the correct dimensions prior to cutting
drywall.
Model Cutout Dimension Mounting Depth
ESS-SUB-SNGL-8
9.7" 3 /"
ESS-SUB-ENC-RET-SGL8
12" × 12" 3 /”
ESS-SUB-ENC-IW-PCON
9.7” 3 /
ESS-SUB-ENC-IWIC-PCO
9.7" 5/”
Existing Construction Install
Free-air Subwoofer installations can be simplified by using Episode
pre-construction brackets (sold separately). Install them prior to drywall
to allow for precise placement of the subwoofer. Secure the wiring within
reach of the bracket for easy access. If using the speaker as a free air
installation, make a cutout for the speaker using the supplied template.
page | 4
snapav.com Support 866.838.5052
Using The Retrofit Backbox
Using an enclosure in combination with the free air subwoofer can
improve overall system performance by controlling the air volume
behind the wall. In addition to added performance, enclosures also aid in
reducing transient noise to adjacent rooms. If using the retrofit enclosure
(ESS-SUB-ENC-RET-SGL8) first make a cutout for the enclosure using the
supplied template. Allow space for the bezel if installing near adjacent
objects, or cut the hole in two steps as shown below.
Note: Wire the retrofit enclosure before placing and securing in the wall.
Search
Jack Saint
35:45 / 41:08
#VideoEssay #TimBurton #TeamRedQueen
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
343,799 views
13K
960
SHARE
SAVE
Jack Saint
Published on Sep 28, 2018
enjoy the vid? support at https://www.patreon.com/jacksaint
like  subscribe  hit the bell (i'm told that helps too)
In the heady days of the mid-2000s, Tim Burton was in high demand, and it was decided he'd head the newest adaptation of Lewis Carroll's Alice In Wonderland. Tim, who admitted having "no personal connection" to the original text, decided to use the lm as a ground-up reimagining of the story - a hero's journey with magical swords and ancient prophecies and a strong moral message about... following orders? Ultimately we wound up with a lm lacking any real identity, confused in its own message, and somehow less feminist than something written in the late 1800s.
But I'm getting ahead of myself. O we trek, into the world of Wonderland.
TWITTER: https://twitter.com/LackingSaint
FACEBOOK: https://www.facebook.com/Lackingsaint/
ANISOC COMMUNITY: https://discord.gg/BttSM9j
#VideoEssay #TimBurton #TeamRedQueen
Watch Later
Private
Gianna Buttereld
2 / 9
1
11:44
REACTING to ANIMATION SMEARS - These are SO WEIRD!!
Draw with Jazza
41:09
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
Jack Saint
3
25:06
Pet Sematary (1989) KILL COUNT
Dead Meat
4
12:26
4 Time-Saving Tips (from a guy who spent 13 YEARS drawing a comic)
larsmartinson
5
19:10
I TRUSTED YOU!! | Instagram Followers Design My Character | Character Design Art Challenge
DrawingWiWaes
6
15:20
Your art sucks, and that's OK
Astri Lohne
7
21:53
Hulking Fire Beast Fantasy Oil Painting by Fantasy Artist Je Miracola
jemiracola
8
22:45
DRAWING ON A SCREEN! | Wacom Cintiq 16 Tablet | My Digital Art Process
DrawingWiWaes
9
21:01
TOP 10 Tips: MAKE your ART STAND OUT!
Draw with Jazza
A Brief History
Ad
www.bhphotovideo.com
34:11
Sky High: Disney's Fascist Eugenics Movie | Jack Saint
Jack Saint
379K views
25:47
Game Of Thrones - Season 1 ULTIMATE RECAP!
Film Cram!
1.2M views
30:59
How 90s Cartoons Handled LGBT Stu (King of the Hill, Robot Jones, Sailor Moon, Mission Hill)
Jack Saint
436K views
47:45
Bayonetta 2 Retrospective | The Second Climax
Foxcade
77K views
58:59
Unbelievable Ways The Victorians Caused Their Own Deaths | Absolute History
Absolute History
Recommended for you
Adapting Death Note: Why No Version Gets It Completely Right
Calluna Reviews
39K views
That Time Disney Remade Beauty and the Beast
Lindsay Ellis
1.5M views
Why 'Friends' Might Be Hard To Go Back To | Jack Saint
Jack Saint
186K views
A Journey Through Rule of Rose | Monsters of the Week
RagnarRox
133K views
The Complete American Horror Story Timeline | Season 1 to Season 8
GameSpot Universe
361K views
r/EntitledParents | Mom STEALS Prosthetic Leg
VoiceyHere
Recommended for you
I nally watched The Help. Is it worse than Green Book? (review)
For Harriet
Recommended for you
What Makes Bloodborne A Great Horror Game? (Halloween 2017 Special)
Foxcade
116K views
Drawing Self Portraits in 10 Min, 1 Min, & 10 Sec
The Drawfee Channel
230K views
New
Souls Lore - "The Usurpation of Fire" Ending Quest for Knowledge
Fungo
Recommended for you
The Evolution Of Queerbaiting: From Queercoding to Queercatching
Rowan Ellis
216K views
The Truth About 90s Cartoons And "LGBT Brainwashing" | Jack Saint
Jack Saint
292K views
Why Disney's Twist Villains Don't Work
Scharillas Productions
2.5M views
Artists Draw Celebrities (Based Only On Description)
The Drawfee Channel
594K views
The Fall of The Simpsons: How it Happened
Super Eyepatch Wolf
4.5M views
Removed from Watch later
OBSTRUCTION
PLUG
1. Cut the drywall at a 45° angle so that if the
enclosure is too close to an obstruction, you
can easily ‘plug’ the hole.
2. If there are no obstructions, cut again at a 90°
angle.
3. Wire the retrofit enclosure, then insert it into
the space cut into the drywall.
Search
Jack Saint
35:45 / 41:08
#VideoEssay #TimBurton #TeamRedQueen
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
343,799 views
13K
960
SHARE
SAVE
Jack Saint
Published on Sep 28, 2018
enjoy the vid? support at https://www.patreon.com/jacksaint
like  subscribe  hit the bell (i'm told that helps too)
In the heady days of the mid-2000s, Tim Burton was in high demand, and it was decided he'd head the newest adaptation of Lewis Carroll's Alice In Wonderland. Tim, who admitted having "no personal connection" to the original text, decided to use the lm as a ground-up reimagining of the story - a hero's journey with magical swords and ancient prophecies and a strong moral message about... following orders? Ultimately we wound up with a lm lacking any real identity, confused in its own message, and somehow less feminist than something written in the late 1800s.
But I'm getting ahead of myself. O we trek, into the world of Wonderland.
TWITTER: https://twitter.com/LackingSaint
FACEBOOK: https://www.facebook.com/Lackingsaint/
ANISOC COMMUNITY: https://discord.gg/BttSM9j
#VideoEssay #TimBurton #TeamRedQueen
Watch Later
Private
Gianna Buttereld
2 / 9
1
11:44
REACTING to ANIMATION SMEARS - These are SO WEIRD!!
Draw with Jazza
41:09
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
Jack Saint
3
25:06
Pet Sematary (1989) KILL COUNT
Dead Meat
4
12:26
4 Time-Saving Tips (from a guy who spent 13 YEARS drawing a comic)
larsmartinson
5
19:10
I TRUSTED YOU!! | Instagram Followers Design My Character | Character Design Art Challenge
DrawingWiWaes
6
15:20
Your art sucks, and that's OK
Astri Lohne
7
21:53
Hulking Fire Beast Fantasy Oil Painting by Fantasy Artist Je Miracola
jemiracola
8
22:45
DRAWING ON A SCREEN! | Wacom Cintiq 16 Tablet | My Digital Art Process
DrawingWiWaes
9
21:01
TOP 10 Tips: MAKE your ART STAND OUT!
Draw with Jazza
A Brief History
Ad
www.bhphotovideo.com
34:11
Sky High: Disney's Fascist Eugenics Movie | Jack Saint
Jack Saint
379K views
25:47
Game Of Thrones - Season 1 ULTIMATE RECAP!
Film Cram!
1.2M views
30:59
How 90s Cartoons Handled LGBT Stu (King of the Hill, Robot Jones, Sailor Moon, Mission Hill)
Jack Saint
436K views
47:45
Bayonetta 2 Retrospective | The Second Climax
Foxcade
77K views
58:59
Unbelievable Ways The Victorians Caused Their Own Deaths | Absolute History
Absolute History
Recommended for you
Adapting Death Note: Why No Version Gets It Completely Right
Calluna Reviews
39K views
That Time Disney Remade Beauty and the Beast
Lindsay Ellis
1.5M views
Why 'Friends' Might Be Hard To Go Back To | Jack Saint
Jack Saint
186K views
A Journey Through Rule of Rose | Monsters of the Week
RagnarRox
133K views
The Complete American Horror Story Timeline | Season 1 to Season 8
GameSpot Universe
361K views
r/EntitledParents | Mom STEALS Prosthetic Leg
VoiceyHere
Recommended for you
I nally watched The Help. Is it worse than Green Book? (review)
For Harriet
Recommended for you
What Makes Bloodborne A Great Horror Game? (Halloween 2017 Special)
Foxcade
116K views
Drawing Self Portraits in 10 Min, 1 Min, & 10 Sec
The Drawfee Channel
230K views
New
Souls Lore - "The Usurpation of Fire" Ending Quest for Knowledge
Fungo
Recommended for you
The Evolution Of Queerbaiting: From Queercoding to Queercatching
Rowan Ellis
216K views
The Truth About 90s Cartoons And "LGBT Brainwashing" | Jack Saint
Jack Saint
292K views
Why Disney's Twist Villains Don't Work
Scharillas Productions
2.5M views
Artists Draw Celebrities (Based Only On Description)
The Drawfee Channel
594K views
The Fall of The Simpsons: How it Happened
Super Eyepatch Wolf
4.5M views
Removed from Watch later
OBSTRUCTION
PLUG
Allow space for the bezel if installing near adjacent objects, or cut the hole
in two steps as shown below.
1. Cut the drywall at a 45° angle so that if the
speaker is too close to an obstruction, you
can easily ‘plug’ the hole.
2. If there are no obstructions, cut the drywall
again, this time at a 90° angle.
3. Insert the subwoofer into the cutout. Thin
bezel round grille included with free-air
subwoofer.
page | 5
© 2019 Episode®
DOG EARS
Stud
Joint
Fastener
Locations
Adding the Subwoofer to the Retrofit Enclosure
Wire the subwoofer to the pigtail contained within the enclosure before
installing into the wall. Insert ESS-SUB-SNGL-8 after completing install of
the retrofit enclosure(s).
IMPORTANT: Be sure to align the dog ears of
the subwoofer to the markings shown on the
enclosure. If not done properly, the dog ears
may jam against the side, making the speaker
very difficult to remove.
NEW CONSTRUCTION INSTALLATIONS
ESS-SUB-ENC-IW-PCON and ESS-SUB-ENC-IWIC-PCO enclosures are intended
for install during the pre-construction phase in the home. These controll the
air volume behind the wall, limit the footprint visible from the finished surface
while also helping to reduce transient noise to adjacent rooms.
IMPORTANT: Consider placement of subwoofers early in the process and
test the placement of the product in the room prior to installing drywall.
Wire enclosures BEFORE drywall is installed.
Note: Take extra precautions to secure and dampen studs, drywall, pipes,
wires, etc in the wall during the process of installing the pre-construction
enclosure.
4. Secure the back box into the drywall by
tightening the dog ears or using the frame of
the enclosure to fasten to joists.
NOTE: Stud bays can be spanned vertically
or horizontally with 2 subwoofer units
without needing to cut the stud joist. Ensure
the retrofit enclosure bezels butt up to
one another and are in alignment so the
dual sub grille will fit over the subs. See
the specifications tables for optional grille
accessories.
VERTICAL
HORIZONTAL
page | 6
snapav.com Support 866.838.5052
With Extension Arms
NOTE: The extension arms allow for installation in a stud bay spanning
up to 24". Slotted holes allow for side-to-side adjustment within a stud
bay prior to securing in the final position.
1. Choose a stud bay for installation of the back box using the extension
arms.
2. Attach the extension arms to the existing brackets on the enclosure,
using the supplied hardware.
× 6
× 6
Search
Jack Saint
35:45 / 41:08
#VideoEssay #TimBurton #TeamRedQueen
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
343,799 views
13K
960
SHARE
SAVE
Jack Saint
Published on Sep 28, 2018
enjoy the vid? support at https://www.patreon.com/jacksaint
like  subscribe  hit the bell (i'm told that helps too)
In the heady days of the mid-2000s, Tim Burton was in high demand, and it was decided he'd head the newest adaptation of Lewis Carroll's Alice In Wonderland. Tim, who admitted having "no personal connection" to the original text, decided to use the lm as a ground-up reimagining of the story - a hero's journey with magical swords and ancient prophecies and a strong moral message about... following orders? Ultimately we wound up with a lm lacking any real identity, confused in its own message, and somehow less feminist than something written in the late 1800s.
But I'm getting ahead of myself. O we trek, into the world of Wonderland.
TWITTER: https://twitter.com/LackingSaint
FACEBOOK: https://www.facebook.com/Lackingsaint/
ANISOC COMMUNITY: https://discord.gg/BttSM9j
#VideoEssay #TimBurton #TeamRedQueen
Watch Later
Private
Gianna Buttereld
2 / 9
1
11:44
REACTING to ANIMATION SMEARS - These are SO WEIRD!!
Draw with Jazza
41:09
Tim Burton's Alice In Wonderland Was A Mistake | Jack Saint
Jack Saint
3
25:06
Pet Sematary (1989) KILL COUNT
Dead Meat
4
12:26
4 Time-Saving Tips (from a guy who spent 13 YEARS drawing a comic)
larsmartinson
5
19:10
I TRUSTED YOU!! | Instagram Followers Design My Character | Character Design Art Challenge
DrawingWiWaes
6
15:20
Your art sucks, and that's OK
Astri Lohne
7
21:53
Hulking Fire Beast Fantasy Oil Painting by Fantasy Artist Je Miracola
jemiracola
8
22:45
DRAWING ON A SCREEN! | Wacom Cintiq 16 Tablet | My Digital Art Process
DrawingWiWaes
9
21:01
TOP 10 Tips: MAKE your ART STAND OUT!
Draw with Jazza
A Brief History
Ad
www.bhphotovideo.com
34:11
Sky High: Disney's Fascist Eugenics Movie | Jack Saint
Jack Saint
379K views
25:47
Game Of Thrones - Season 1 ULTIMATE RECAP!
Film Cram!
1.2M views
30:59
How 90s Cartoons Handled LGBT Stu (King of the Hill, Robot Jones, Sailor Moon, Mission Hill)
Jack Saint
436K views
47:45
Bayonetta 2 Retrospective | The Second Climax
Foxcade
77K views
58:59
Unbelievable Ways The Victorians Caused Their Own Deaths | Absolute History
Absolute History
Recommended for you
Adapting Death Note: Why No Version Gets It Completely Right
Calluna Reviews
39K views
That Time Disney Remade Beauty and the Beast
Lindsay Ellis
1.5M views
Why 'Friends' Might Be Hard To Go Back To | Jack Saint
Jack Saint
186K views
A Journey Through Rule of Rose | Monsters of the Week
RagnarRox
133K views
The Complete American Horror Story Timeline | Season 1 to Season 8
GameSpot Universe
361K views
r/EntitledParents | Mom STEALS Prosthetic Leg
VoiceyHere
Recommended for you
I nally watched The Help. Is it worse than Green Book? (review)
For Harriet
Recommended for you
What Makes Bloodborne A Great Horror Game? (Halloween 2017 Special)
Foxcade
116K views
Drawing Self Portraits in 10 Min, 1 Min, & 10 Sec
The Drawfee Channel
230K views
New
Souls Lore - "The Usurpation of Fire" Ending Quest for Knowledge
Fungo
Recommended for you
The Evolution Of Queerbaiting: From Queercoding to Queercatching
Rowan Ellis
216K views
The Truth About 90s Cartoons And "LGBT Brainwashing" | Jack Saint
Jack Saint
292K views
Why Disney's Twist Villains Don't Work
Scharillas Productions
2.5M views
Artists Draw Celebrities (Based Only On Description)
The Drawfee Channel
594K views
The Fall of The Simpsons: How it Happened
Super Eyepatch Wolf
4.5M views
Removed from Watch later
× 6
× 6
1. Choose the location for the enclosure and
install the brackets.
2. Secure the enclosure to the studs through the
brackets.
ESS-SUB-ENC-IWIC-PCO (In Ceiling Back Box)
Without extention Arms
The ESS-SUB-ENC-IWIC-PCO is designed for in-ceiling and in-wall
preconstruction applications. This enclosure only fits into a 2"× 6" stud
bays and can be used in walls as well. The ESS-SUB-ENC-IW-PCON should
be used if the wall is built with 2" × 4" studs.
page | 7
© 2019 Episode®
3. Secure the extention arms to the studs.
ESS-SUB-ENC-IW-PCON
The ESS-SUB-ENC-IW-PCON is designed to expand air volume behind the
wall for an improved sound performance. Follow the instructions below
to install this enclosure before the drywall is installed. This enclosure is
designed for use with 2" × 4" studs.
× 6
1. Choose a stud bay for installation of
the back box.
2. Leave approximately 4" of room
at the bottom of the enclosure for
easier wiring.
3. Secure the enclosure to the stud
using the included brackets, again,
taking extra precaution to ensure
enclosure is tight to studs and
drywall to avoid vibrations during
use.
Note: By default the ESS-SUB-IW-PCON
enclosure is configured for a single
subwoofer in the lower location. To move
the subwoofer to the upper location,
swap the blank plate with the drywall
flange. To convert the enclosure for use
with dual subwoofers, replace the blank
with the included second drywall flange.
BLANK FLANGE
page | 8
snapav.com Support 866.838.5052
Adding the Subwoofer to the Enclosure for ESS-SUB-ENC-IWIC-PCO and
ESS-SUB-ENC-IW-PCON
Complete the instructions below once the drywall has been installed,
using the drywall flange to cut out the opening in the sheetrock.
1. Prewire the subwoofer to the pigtails in the enclosure.
2. Insert the subwoofer into the enclosure.
3. Tighten the dogs to secure.
SECURING THE ESS
-
SUB
-
SNGLE
-
8 SUBWOOFER
Engage and Tighten
ENGAGED
PARKED
TIGHTENED
Dog
Carrier
Dog
Dog
Spring
Spring
Spring
Carrier
1. Insert the subwoofer into the opening and
turn the screw for each of the dogs one
quarter turn clockwise to engage the spring
mechanism.
2. The subwoofer is now held in place, freeing
up your hands so that you may continue to
tighten the dogs safely.
3. Tighten to send the carrier to retrieve the
dog until you feel resistance, but do not
over tighten. If using a drill, use a low-torque
setting.
page | 9
© 2019 Episode®
!
IMPORTANT: The dogs must be engaged AND
tightened before attempting to remove the
subwoofer. The dogs will not retract into the parked
position if not fully engaged and tightened.
1. Turn each dog screw in a counter-
clockwise direction until the dog is in its
original parked position.
Disengage and Remove
TIGHTENED
Dog
Carrier
Spring
PARKED
Dog
Spring
2. Once the dogs are disengaged, the
subwoofer is easily removed from the
ceiling or wall.
page | 10
snapav.com Support 866.838.5052
CONNECT
It is recommended to pair Episode Signature subwoofers and enclosures
with Episode subwoofer amplifiers. The configuration, number of
subwoofers, and size of the room presents several amplifier options from
which to choose.
Small to Medium Room Connection Diagram
The EA-AMP-SUB-1D-150 amplifier is recommended for spaces less than
1500 square ft up to 2500 square feet.
1. Connect receiver directly to the amplifier.
2. Connect speaker(s) to amplifier observing proper polarity (+ to + and
– to – ).
ESS-SUB-SNGL-8
The amplifier EQ toggle should be set to A.
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
+
-
EA-AMP-SUB-1D-150
ESS-SUB-SNGL-8
AVR/SOURCE
page | 11
© 2019 Episode®
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
+
-
+
-
+
-
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
ESS-SUB-ENC-IWIC-PCO / ESS-SUB-ENC-RET-SGL8
The amplifier EQ toggle should be set to C.
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigge r
Out
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
ESS-SUB-SNGL-8
AVR/SOURCE
EA-AMP-SUB-1D-150
AVR/SOURCE
EA-AMP-SUB-1D-150
OR
ESS-SUB-ENC-IWIC-PCO or
ESS-SUB-ENC-RET-SGL8
+
ESS-SUB-SNGL-8
page | 12
snapav.com Support 866.838.5052
ESS-SUB-ENC-IW-PCON
The amplifier EQ toggle should be set to B.
LS
RS
SUB
CEN
L
R
Switched
Outlet
+ 12V Trigger
Out
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
A B C
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 0 10
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
Medium to Large Room Connection Diagram
The EA-AMP-SUB-1D-500 amplifier is recommended for spaces 1500
square ft to over 2500 square feet.
1. Connect receiver directly to the amplifier.
2. Connect speaker(s) to amplifier observing proper polarity (+ to + and
– to – ).
EA-AMP-SUB-1D-150
ESS-SUB-ENC-IW-PCON
+
ESS-SUB-SNGL-8 (qty. 1)
AVR/SOURCE
page | 13
© 2019 Episode®
ESS-SUB-ENC-RET-SNGL8
Using the front panel of the subwoofer amplifier, select the “Dual8” preset
EQ.
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
+ - + -
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
ESS-SUB-ENC-RET-SGL8
+
ESS-SUB-SNGL-8
EA-AMP-SUB-1D-500
ESS-SUB-ENC-RET-SGL8
(qty. 4)
+
ESS-SUB-SNGL-8 (qty. 4)
EA-AMP-SUB-1D-500
page | 14
snapav.com Support 866.838.5052
ESS-SUB-ENC-IWIC-PCO
Using the front panel of the subwoofer amplifier, select the “Dual8” preset
EQ.
LS
RS
SUB
CEN
L
R
Switched
Outlet
+12V Trigger
Out
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
ABC
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 010
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
ESS-SUB-ENC-IW-PCON
Using the front panel of the subwoofer amplifier, select the “Dual8” preset
EQ.
LS
RS
SUB
CEN
L
R
Switched
Outlet
+ 12V Trigger
Out
OUT
IN
IN
R
L
(LFE)
OUT
TRIGGER
DC 12V
A B C
EQ
SETTINGS
EQ
MODE
BYPASS TRIGGER
AUTO
ONON
POWER MODES
50
300 (LFE) 0
180 0 10
100-120V AC
220-240V AC
FUSE T3.15AL/250V
EA-AMP-SUB-1D-150
100-120V~60Hz/220-240V~50Hz 150WATTS
CROSSOVER
PHASE
VOLUME
SUB 1
SUB 2
Designed and Engineered in USA
Made in China
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
+
-
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
ESS-SUB-ENC-IW-PCON
+
ESS-SUB-SNGL-8 (qty, 2)
EA-AMP-SUB-1D-500
ESS-SUB-ENC-IWIC-PCO
+
ESS-SUB-SNGL-8
EA-AMP-SUB-1D-500
page | 15
© 2019 Episode®
Using the front panel of the subwoofer amplifier, select the “Dual8” preset
EQ.
+
-
+
-
IN
R
L
(LFE)
OUT
OUT
IN IR UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
+
-
+
-
FINE TUNE
To fine tune the system, leverage the rear panel of the subwoofer amplifier.
EQ settings should be adjusted based on the size of the room and the size
of the enclosure. Refer to the above sections for ideal EQ setting for each
configuration. Crossover, phase and volume should also be adjusted to
optimize performance of the system.
ESS-SUB-ENC-IW-PCON (qty,2)
+
ESS-SUB-SNGL-8 (qty, 4)
EA-AMP-SUB-1D-500
page | 16
snapav.com Support 866.838.5052
SPECIFICATIONS
Product ESS-SUB-SNGL-8
Connector Type Gold-Plated Push Terminals
Frequesncy Response 30Hz - 300Hz
Nominal Impedance 8 ohms
Power Handling 150 W (RMS)/200W (Dynamic)
Sensitivity 85 dB
Speaker Grille Steel Micro-Perf Mesh / White / low profile thin bezel
Woofer 6” Polypropylene cone woofer with vacuum-deposited titanium
Dimensions FInished
Diameter with Grille
11"
Mounting Depth 3 /
Cutout Diameter 9.7"
Weight 6.5 lbs/ 2.96 kgs
Optional Accessories: Product Item Number: Notes:
Optional Pre-
Construction Brackets
ES-ESS-BRKT-IC-8
Optional Grille Kits ES-ESS-GRLRND-IC-8-B Round / thin bezel grille / Black
ES-ESS-GRLSQ-IC-8 Square (adaptor plate included) / thin
bezel grille / White
ES-ESS-GRLSQ-IC-8-B Square (adaptor plate included) / thin
bezel grille / Black
ES-ESS-GRLXRND-IC-8 Round / Bezel-less grille / White
ES-ESS-GRLXRND-IC-
8-B
Round / Bezel-less grille / Black
ES-ESS-GLXSQ-IC-8 Square (adaptor plate included) /
Bezel-less grille / White
ES-ESS-GLXSQ-IC-8-B Square (adaptor plate included) /
Bezel-less grille / Black
page | 17
© 2019 Episode®
Optional Enclosures ESS-SUB-ENC-RET-
SGL-8
Enclosure - Retrofit - minimum standard
stud construction 2” x 4” - Single 8”
Subwoofer installation
ESS-SUB-ENC-IWIC-PCO Enclosure - Pre-Construction - minimum
standard stud construction 2” x 6” -
Single 8” Subwoofer installation
ESS-SUB-ENC-IW-PCON Enclosure - Pre-Construction - minimum
standard stud construction 2” x 4” -
Single or Dual 8” Subwoofer installation
Product
ESS-SUB-ENC-RET-SGL-8 ESS-SUB-ENC-IWIC-
PCO
ESS-SUB-ENC-IW-PCON
Connector
Type
Gold-Plated Push
Terminals
Gold-Plated Push
Terminals
Gold-Plated Push
Terminals
Frequesncy
Response
Down to 22 Hz Down to 20 Hz Down to 19 Hz
Speaker
Grille
Steel Micro-Perf Mesh /
White / low profile thin
bezel Included
Uses grille from
ESS-SUB-SNGL-8 or
optional ESS grilles
Uses grille from
ESS-SUB-SNGL-8 or
Optional
ESS_GRL-DSUB8-RET-WT
and ESS-GRL-DSUB8-
RET-BLK for dual retrofit
subwoofer installations.
Optional ESS_GRL-
DSUB8-RET-WT and
ESS-GRL-DSUB8-RET-BLK
for dual retrofit subwoofer
installations.
Enclosure
Material Wall
Thickness
/" /" /"
Internal Air
Volume (Cu.
Inches)
290 500 1050
Dimensions
FInished
Diameter
with Grille
14" × 14" × 4.25" 12.8" × 12.8" × 5.4" 43.4" × 12.8" × 3.3"
Mounting
Depth
3 / 5/ 3/
Cutout
Diameter
12" × 12" 9.7" 9.7"
Weight 10.4 lbs/ 4.71 kgs 7.9 lbs/3.6 kgs
page | 18
snapav.com Support 866.838.5052
WARRANTY
Limited Lifetime Warranty
Episode® speakers have a Limited Lifetime Warranty. This warranty
includes parts and labor repairs on all components found to be defective in
material or workmanship under normal conditions of use. This warranty will
not apply to products that have been abused, modified, or disassembled.
Products to be repaired under this warranty must be returned to SnapAV or
a designated service center with prior notification and an assigned Return
Authorization number (RA).
CONTACTING TECHNICAL SUPPORT
866.838.5052
[email protected]
page | 19
© 2019 Episode®
© 2019 Episode®
Rev: 190318-1750
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Episode ESS-SUB-ENC-RET-SGL8 Installation guide

Episode
Brand
Episode
Model
ESS-SUB-ENC-RET-SGL8
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents