SEI MS070400TX Assembly Instruction Manual

SEI
Brand
SEI
Model
MS070400TX
Type
Assembly Instruction Manual

This manual is also suitable for

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Large TV/Media Stand
MS070300TX- ANTIQUE WHITE
MS070400TX- ANTIQUE BLACK
Assembly Instructions
PO:
1
Large TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit.
2 3
Quantity
of 1
Quantity
of 1
Quantity
of 1
Bottom Panel
4
5
6
Quantity
of 1
Quantity
of 1
Quantity
of 2
7
8
Quantity
of 1
Quantity
of 4
Left Middle Panel
Fixed Shelf
Apron Foot
Left Door
10
Quantity
of 1
Right Door
11
Quantity
of 1
12
Quantity
of 1
9
Quantity
of 1
Back Panel Top Panel
Right Middle Panel
Right Side Panel
13
Quantity
of 1
Drawer Face Panel
14
Quantity
of 2
15
Quantity
of 1
Drawer Bottom Panel Drawer Side Panel
16
Quantity
of 1
Drawer Back Panel
17
Quantity
of 2
Adjustable Shelf
1
8
Quantity
of
1
C
enter
F
oot
Large TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below . You may receive extra hardware with your unit.
Assembly Tool Required
No. 2 Phillips Screwdriver
(A)
8mm x 30 mm
Wood Dowel
Quantity
of 27
1/4” x 1” Bolt
(B)
Quantity
of 20
(D)
Quantity
of 8
(E)
Metal Pin
Quantity
of 4
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
(G)
(H)
Quantity
of 4
Quantity
of 2
Magnet Pin
(J) (L)
Quantity
of 2
3.5mm x 15 mm
Screw For Magnet
3/16” x
3
8
mm
Bolt For Drawer
Quantity
of 18
Quantity
of 8
Quantity
of 8
Quantity
of 4
(C)
(F)
(I)
5/32” x 22mm
Bolt For Wood Knob
3mm x 10 mm
Screw For Magnet Pin
3.5mm x 12 m
m
Screw For Back
Wood Knob
(
K
)
Quantity
of 2
Magnet
Metal Nut
Large TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Insert two Wood Dowels (A) into
predrilled holes in Side Panel(2,3)
each and two Wood Dowels(A) in
Right Middle Panel(4). Be sure
that the cross bar on the Right
Middle Panel(4) faces the Left
Side Panel(2).
Step 3. Attach Side Panels(2,3) and Right
Middle Panel(4) to Bottom Panel(1)
with Bolts(B) and tighten.
Step 1. Insert Wood Dowels(A) in Right
side of Fixed shelves(6) and
Wood Dowels(A) into decorative
Apron(7).
Step 2. Attach the decorative Apron(7) to
Bottom Panel(1) by Bolts(B) and
tighten.
Step 3. Attach the Fixed shelves(6) to the
Right Middle Panel(4).
Figure 2
Figure 1
(A)
(B)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 6
Quantity
of 6
(A)
(B)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 7
Quantity
of 2
Large TV/Media Stand
Assembly Instructions
Step 1. Insert Wood Dowels(A) in
predrilled holes in the Left Middle
Panel(5) and Wood Dowels (A) in
the other side of Fixed Shelf(6). Be
sure the cross bar on the Left
Middle Panel(5) faces the Right
Side Panel(3).
Step 2. Attach Left Middle Panel(5) to the
Bottom Panel(1) and fasten by
Bolts(B).
Step 3. Screw Feet(8) and center foot(18)
into Bottom Panel(1)
and tighten.
Figure 3
Figure 4
Figure 5
Step 1. Attach the two side Doors(9,10)
to hinged side panels(2,3) and
insert the hinge.
Step 1. Attach the Magnet(K) to the Top
Panel(11) with
Screw For
Magnet
(L).
(
I
)
Magnet P
in
Quantity
of 2
(
K
)
(
L
)
Quantity
of 2
Quantity
of 4
(
J
)
3mm x 10mm
Screw For Magnet Pin
Quantity
of 2
Magnet
3.5mm x 15mm
Screw For Magnet
(A)
(B)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 6
Quantity
of 2
B
B
Large TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(A) into
Predrilled top holes in Side
Panels(2,3) and Middle Panel(4,5).
Step 2. Attach the Top Panel (11) into
the Panels(2,3,4,5) with Bolts(B)
and tighten.
Figure 6
Figure 8
Step 1. Insert Back Panel(12) into
grooves of side panels with
Screw For Back(C) and tighten.
(C)
3.5mm x 12 mm
Screw For Back
Quantity
of 20
3/16” x 38 mm
Bolt For Drawer
(
E
)
Quantity
of 4
Step 1. Insert Nut(D) into predrilled
holes on Drawer Face Panel(13).
Step 2. Attach Drawer Side Panels(14)
to Drawer Face Panel(13) with
Bolt for Drawer(E) through outer
predrilled holes in Drawer Side
Panels(14).
Figure 7
(A)
(B)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 8
Quantity
of 8
Metal Nut
(D)
Quantity
of 4
Large TV/Media Stand
Assembly Instructions
Figure 9
Figure 10
Figure 11
5/32” x 22mm
Bolt For Wood Knob
(
G
)
Quantity
of 2
(
F
)
Wood Knob
Quantity
of 2
5/32” x 22mm
Bolt For Wood Knob
(
G
)
Quantity
of 2
(
F
)
Quantity
of 2
Wood Knob
(
H
)
Quantity
of 8
Metal Pin
Step 1. Put the Drawer Bottom Panel(15)
into inner grooves of Drawer
Side Panels(14) and Drawer
Face Panel(13).
Step 2. Insert Nut(D) into predrilled
holes on Drawer Back Panel(16),
then be attach Drawer Back
Panel(16) to end side of Drawer
Side Panels(14),fasten with
Bolts for Drawer(E) and tighten.
Step 1. Attach Wood Knob(F) into the
Drawer Face Panel(13) with Bolt
For Wood Knob(G) and tighten.
Step 1. Insert the Metal Pins(H) into
desired holes of side panels(2,3,4,5).
Step 2. Put the Adjustable Shelves(17)
above the Metal Pins(H).
Step 3. Attach the Wood Knob(F) into
the Doors(9,10) with Bolt For
Wood Knob (G) and tighten.
Step 4. Put the finish drawer in the
Bottom space.
3/16” x 38 mm
Bolt For Drawer
(E)
Quantity
of 4
Metal Nut
(D)
Quantity
of 4
Customer Service 1
-
800
-
633
-
5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Custom
er Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at service@seidal.com. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Style No
Parts Letter
Parts Description
Quantit
y Needed
Parts Replacement Form
Style No
Parts Letter
Parts Description
Quantity Needed
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width
of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS070300TX & MS070400TX
Large TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 09/01/2011
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

SEI MS070400TX Assembly Instruction Manual

SEI
Brand
SEI
Model
MS070400TX
Type
Assembly Instruction Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents