SEI San Santo TV/Media Stand MS834300TX Assembly Instructions Manual

SEI
Brand
SEI
Model
San Santo TV/Media Stand MS834300TX
Type
Assembly Instructions Manual
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
San Santo TV/Media Stand
MS834300TX-Brown Mahogany
Assembly Instructions
PO:11
740
A
San Santo TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
B C
Quantity
of 2
Quantity
of 2
Quantity
of 2
Drawer Left Side Panel
Lower Back Panel
Adjustable Shelf
Drawer Right Side Panel
E
F
G
Quantity
of 2
Quantity
of 1
Quantity
of 1
I
J
K
Quantity
of 1
Quantity
of 1
Quantity
of 1
Q R
Quantity
of 1
Quantity
of 2
Drawer Back Panel Left Side Panel Right Side Panel
Left Door
Right Door
Top Panel
M N O
Quantity
of 1
Upper Middle Panel
Lower Middle Panel
Bottom Frame
D
H
L
P
Quantity
of 2
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Quantity
of 1
Upper Back Panel
Drawer
Bottom Panel
Bottom Panel
Support Post
San Santo TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below. You may receive extra hardware with your unit
Assembly Tool Required
No. 2 Phillips Screwdriver
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 20
1/4” x 1” Bolt
(2)
Quantity
of 26
3.5mm x 1
2
mm
Screw For Back
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement
parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Qua
ntity
of 16
Magnet
Metal Nut
Metal Pin
(3)
(
5
)
(
6
)
(
7
)
(
9
)
(
10
)
Quantity
of 21
Quantity
of 6
Quantity
of 2
Quantity
of 4
Quantity
of 16
3/16” x 32mm
Bolt For Drawer
3.5mm x 1
5
mm
Screw For Magnet
Handle
(
11
)
5/32” x 22mm
Bolt For Handle
Quantity
of 4
Bracket
Quantity
of 4
(13)
(14)
Quantity
of 4
7mm x 38mm
Screw For Wall
(15)
3.5mm x 15 mm
Screw For Bracket
Quantity
of 2
Quantity
of 6
Quantity
of 8
Quantity
of 4
(4)
(8)
(12)
(16)
Plastic Chain
Quantity
of 2
Plastic Anchor
8m
m x 50 mm
Long Wood Dowel
San Santo TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Attach the Magnet(3) to the
Upper Middle Panel(I) with
Screw For Magnet(4),then fasten
them.
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom
Panel(H).
Step 2. Attach Left Side Panel(F) to
the Bottom Panel(H) with Bolt(2).
Figure
3
Figure 1
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 2
(10)
8mm x 30 mm
Wood Dowel
Quantity
of 2
(2)
1/4” x 1” Bolt
Quantity
of 2
(2)
1/4” x 1” Bolt
Quantity
of 2
Step 1. Insert the Long Wood Dowels(10)
into predrilled holes in Upper
Middle Panel(I).
Step 2. Attach Upper Middle Panel(I) to
the Bottom Panel(H) with Bolt(2).
Figure 2
(4)
3.5mm x 15 mm
Bolt For Magnet
Quantity
of 4
(3)
Magnet
Quantity
of 2
San Santo TV/Media Stand
Assembly Instructions
Step 1. Attach Lower Middle Panel(J) to
the Bottom Panel(H) with Bolt(2)
as pictured.
Figure
4
Figure
6
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom Frame(K)
and Lower Middle Panel(J).
Step 2. Attach Bottom Frame(K) to the
Left Side Panel(F) and Lower
Middle Panel(J) with Bolt(2),
then fasten them.
(2)
1/4” x 1” Bolt
Quantity
of 2
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom Frame(K)
and Bottom Panel(H).
Step 2. Attach Right Side Panel(G) to
the Bottom Frame(K) and
Bottom Panel(H) with Bolt(2),
then fasten them.
Figure
5
(1)
(2)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 4
Quantity
of 4
(1)
(2)
1/4” x 1” Bolt
8mm x
30 mm
Wood Dowel
Quantity
of 4
Quantity
of 5
San Santo TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Side
Panels(F,G) and Upper Middle
Panels(I)
Step 2. Attach Top Panel(O) to the Side
Panels(F,G) and Upper Middle
Panel(I) with Bolt(2),
then fasten them.
Figure
9
(5)
3.5mm x 12mm
Screw For Back
Quantity
of 26
Figure
8
Step 1. Attach the Left Door(M) to the
Left Side Panel(F) and Right
Door(N) to the Right Side
Panel(G).
Step 2. Attach Handle(6) to Doors(M,N)
with Bolt For Handle(7).
Step 1. Attach the Upper Back Panel(P)
and Lower Back Panel(Q) as
pictured with Screw For Back(5).
Figure
7
(2)
1/4” x 1” Bolt
Quantity
of 6
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 6
5/32” x 15mm
Bolt For Handle
(7)
Quantity
of 2
(6)
Handle
Quantity
of 2
(7)
Metal Nut
Quantity
of 2
(6)
3
/
16
” x 3
2
mm
Bolt For Drawer
Quantity
of 2
5/32” x 22 mm
Bolt For Handle
Handle
(8)
Quantity
of 8
(9)
Quantity
of 8
Metal Pin
(1
1
)
Quantity
of 8
Step 1. Place Drawer on Lower Middle Panel.
Step 2. Insert Wood Dowels(1) into
predrilled holes Drawer Side
Panel(B,C).
Step 3. Insert the Metal Pins(11) into
desirous holes of inner Side
Panels(F,G) and Upper Middle
Panels(I).
Step 4. Put the Adjustable Shelves(R) on
the Metal Pins(11)in each section.
Step 1. Insert Nut(8) into predrilled holes
on Drawer Face Panel(A).
Step 2. Attach the Drawer Side Panels(B,C)
to Drawer Face Panel(A) with Bolt for
Drawer(9) through outer predrilled
holes in Drawer Side Panels(B,C).
Step 3. Put the Drawer Bottom Panel(D)
into inner grooves of Drawer Side
Panels(B,C) and Drawer Face Panel(A).
Step 4. Insert Nut(8) into predrilled holes
on Drawer Back Panel(E), then be
attach Drawer Back Panel(E) to end
side of Drawer Side Panels(B,C),
fasten with Bolts for Drawer(9).
Step 5. Attach Handle(6) to Drawer Face
Panel(A) with Bolt For Handle(7).
Figure
11
Figure
10
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 4
San Santo TV/Media Stand
Assembly Instructions
San Santo TV/Media Stand
Assembly Instructions
Figure 1
3
Figure 1
2
Step 1. Move this item to the fastened
wall Bracket(12) and tie in
both Bracket(12) with Plastic
Chain(16) as shown in diagram.
Step 1. Attach Bracket(12) to the
Side Panel(F,G) with Screw
For Bracket(13).
Step 2. Drill 1/4 pilot holes in near
proximity of the Bracket(12)
attached to the Side Panel(F,G)
and tap the Plastic Anchor(14)
into wall.
Step 3. Fasten Bracket(12) using
Screw For Wall(15) into the
Plastic Anchor(14).
(1
3
)
(1
2
)
Quantity
of 4
(1
4
)
Plastic Anchor
Quantity
of 4
7mm x 38 mm
Screw For Wal
l
Bracket
3.5mm x 15 mm
Screw For
Bracket
(1
5
)
Quantity
of 4
(1
6
)
Plastic Chain
Quantity
of 2
Quantity
of 4
Customer Service 1
-
800
-
633
-
5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not
recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri
Central time if you have product issues or email us at service@seidal.com. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Style No
Parts Letter
Parts Description
Quantity Needed
Parts Replacement Form
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width
of 50” and supports up to 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS834300TX
San Santo TV/Media Stand
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 04/26/2012
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

SEI San Santo TV/Media Stand MS834300TX Assembly Instructions Manual

SEI
Brand
SEI
Model
San Santo TV/Media Stand MS834300TX
Type
Assembly Instructions Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents