2. Toro
  3. Tow Tube Kit, Log Splitter

Toro Tow Tube Kit, Log Splitter Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Tow Tube Kit, Log Splitter Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3441-958RevA
TowTubeKit
LogSplitter
ModelNo.144-2030
InstallationInstructions
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurfaceandshutoff
theengine.Chockorblockthewheels.
2.Disconnectthesparkplugwire.
3.Raisetherailtotheverticalposition.
4.Useacarjackundertheengine-mountingplate
andraisethemachineuntilthefrontswivel
wheelsareofftheground.Supportthemachine
usingjackstands.
RemovingtheTowTube
1.Removethefrontwheels.
g332089
Figure1
1.Bolt—3/8x3inches(4)3.Nut—3/8inch(4)
2.Frontwheelassembly
2.Removethehitchreceiver.
g332090
Figure2
1.Nut—1/2inch(2)2.Bolt—1/2x3-3/4inches
(2)
3.Removethe2lightsfromthetube.
g332417
Figure3
1.Nut3.Wireharness
2.Light
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3441-958*
4.Removeandretainthe2boltsandnutssecuring
thetowpole.
g332091
Figure4
1.Nut—1/2inch(2)2.Bolt—1/2x1-1/2inches
(2)
5.Removethewireharnessfromthetowpole.
Important:Ensurethatyoudonotdamage
thewireharness.
InstallingtheNewTowTube
1.Usingtheexistingboltsandnutsinthe
bottomholes,securethenewtowpoleand
reinforcementplatetotheframe.
g332095
Figure5
1.Reinforcementplate3.Bolt—1/2x1-1/2inches
(2)
2.Nut—1/2inch(2)
2.Usingthetopholesasatemplate,drill2holes
(17/32inchdiameter)intotheframe.
3.Installthe2boltsintotheholes.
4.Torqueall4boltsto142N∙m(105ft-lb).
2
5.Usingcabletiesasarigidguide,routethewire
harnessthroughthetube.
g332096
Figure6
6.Attachthewireharnesstothe2lightsandinstall
themtothetube.
g332417
Figure7
1.Nut3.Wireharness
2.Light
7.Installthehitchreceiver.T orquetheboltsto91
to113N∙m(67to83ft-lb).
g332090
Figure8
1.Nut—1/2inch(2)2.Bolt—1/2x3-3/4inches
(2)
8.Installthefrontwheels.T orquetheboltsto37to
45N∙m(27to33ft-lb).
g332089
Figure9
1.Bolt—3/8x3inches(4)3.Nut—3/8inch(4)
2.Frontwheelassembly
9.Lowerthemachinesothatthetowpolerestson
thefrontwheels.
10.Lowertherailtothehorizontalposition.
11.Connectthesparkplugwireontheengine.
3
/