4.Removeandretainthe2boltsandnutssecuring
thetowpole.
g332091
Figure4
1.Nut—1/2inch(2)2.Bolt—1/2x1-1/2inches
(2)
5.Removethewireharnessfromthetowpole.
Important:Ensurethatyoudonotdamage
thewireharness.
InstallingtheNewTowTube
1.Usingtheexistingboltsandnutsinthe
bottomholes,securethenewtowpoleand
reinforcementplatetotheframe.
g332095
Figure5
1.Reinforcementplate3.Bolt—1/2x1-1/2inches
(2)
2.Nut—1/2inch(2)
2.Usingthetopholesasatemplate,drill2holes
(17/32inchdiameter)intotheframe.
3.Installthe2boltsintotheholes.
4.Torqueall4boltsto142N∙m(105ft-lb).
2