Konica Minolta DIMAGE RD 3000 Owner's manual

Type
Owner's manual

This manual is also suitable for

1
This manual does not provide instructions for the basic operation of
personal computers, or the basic operation of Windows
®
or Mac
operating systems.
Please refer to the manual that came with your computer for information
on the above mentioned topics.
Digita™, Digita Desktop™ and the Digita logo are licensed or registered trademarks in
the United States and other countries of FlashPoint Technology, Inc.
Microsoft
®
and Windows
®
are registered trademarks in the United States and other
countries of Microsoft Corporation.
The official name of Windows
®
is Microsoft
®
Windows
®
Operating System.
I486 and Pentium
®
are trademarks or registered trademarks of Intel Corporation.
Apple, the Apple logo, Macintosh, Power Macintosh, Mac OS and the Mac OS logo are
registered trademarks of Apple Computer, Inc.
Other company and product names are the trademark or registered trademark of their
respective owners.
This instruction manual may not be copied either in part or in its entirety without the
prior permission of Minolta Co., Ltd.
© 1999 Minolta Co., Ltd.
Every precaution has been taken to ensure the accuracy of this material. Please contact
Minolta if you have any questions, find any mistakes or notice missing information.
Minolta cannot accept responsibility for any loss, damage or other problems caused by
use of this software.
With the exception of personal, home or equivalent use no part of any book, magazine,
music, or other copyrighted material may be used, copied or revised without the prior
permission of the author or copyright holder,.
This software has been designed to mitigate the so-called “Year 2000 Problem.” For
information on how Minolta has addressed the “Year 2000 Problem, please visit our
Website: http://www.minoltaeurope.com
2
TABLE OF CONTENTS
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Terms used in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
For Windows
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
INTRODUCTION
INSTALLING THE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing the Twain-Driver (Windows
®
) . . . . . . . . . . . . . . . . . . . . . . . . 17
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CONNECTING THE CAMERA TO YOUR PC . . . . . . . . . . . . . . . . . . . . . . . 24
SCSI ID Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Terminator power supply setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
The SCSI connector cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
For PC/AT compatible computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
For Apple Macintosh computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connection to the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Insertion of the CF card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BASIC OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Basic operation (Viewer Panel, Image Panel) . . . . . . . . . . . . . . . . . . . 32
Basic operation (Camera Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
OPENING THE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3
TABLE OF CONTENTS
USING THE SOFTWARE
USING THE TWAIN.DRIVER (WINDOWS)
Saving images to the hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Deleting images from the CF-Card . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Quitting the Twain-Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
USING THE VIEWER PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
At the Viewer Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Displaying camera Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Displaying Hard disk Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Copying files from the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Viewing image file properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Printing albums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Deleting images from the CF card . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Creating a new folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Changing the Image Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Sorting images in the Viewer Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .64
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Using Quick View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Changing file names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Adding audio data to an image (Macintosh only) . . . . . . . . . . . . . . . .69
Drag and Drop operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
4
TABLE OF CONTENTS
USING THE IMAGE PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
What you can do at the Image Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Displaying camera images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Displaying hard disk images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Zoom in/Zoom out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Resizing documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Cropping the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Scrolling the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Adjusting Brightness and Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Adjusting Colour Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Using the Quick Correction function . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Lighten/Darken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Sharpen/Soften . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Flipping an image (horizontally or vertically) . . . . . . . . . . . . . . . . . . . 88
Rotating an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Superimposing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Resizing the image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Digita Desktop image filters and plug-in filters . . . . . . . . . . . . . . . . . . 95
Printing images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Saving an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Image file formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Saving images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
USING THE CAMERA PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
WHAT YOU CAN DO FROM THE CAMERA PANEL . . . . . . . . . . . . . . . . . 102
Camera Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
To open the Camera Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
When the Camera Panel does not open . . . . . . . . . . . . . . . . . . . . . . . 105
Displaying camra images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Remote photography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
CAMERA SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Formatting the CF card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Synchronizing the internal clock with your PC clock . . . . . . . . . . . . . . . 112
INTERVAL PHOTOGRAPHY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
5
TABLE OF CONTENTS
SLIDESHOWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
What is a slideshow? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
To open the Slideshow window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Appending image files to a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . 120
Appending individual image files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Append all the image files in a folder . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Changing the display of files in the slideshow window . . . . . . . . . . . 124
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Changing the Order of Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Updating slides (Windows
®
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Removing slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Adding audio to a slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Adding background music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Slideshow Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Presenting a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Saving a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Saving the slideshow as an AVI file . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Saving the slideshow as a QuickTime movie file. . . . . . . . . . . . . . . . . 136
VERIFYING THE DIGITA DESKTOP VERSION . . . . . . . . . . . . . . . . . . . . . 140
For Windows
®
95/98/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
For Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
USER TECHNICAL SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
6
BEFORE YOU BEGIN
Please register this software before you begin using it. Complete the enclosed
user registration card.
Persons who register their software are recognized as official users, and receive
technical support as well as software upgrade and other new product informa-
tion.
Please be aware that you will not receive any notification of registration from Minolta.
The information contained on your user registration card is used exclusively by Minolta
for customer service and product development.The information you provide will remain
confidential.
USER REGISTRATION
7
BEFORE YOU BEGIN
This manual assumes the use of a two-button, right-handed mouse for Windows
®
.The
terms ‘click’and ‘double-click’ refer to a single or double click of the left mouse button.
The term ‘drag’ refers to the action of holding down the left mouse button while moving
the mouse.
If you are using Macintosh OS, the term ‘Command Key’ refers to the key located next
to the Space Bar.
Command names shown in this manual which are common both to the Windows
®
and
Macintosh systems do not indicate any of the shortcut keys found in Windows
®
command names.
Example No. 1: The File command appears as “File” on Windows
®
and “File” on
Macintosh menus, but in this manual it is shown as merely as “File.
Example No. 2: The Save command appears as “Save” on Windows
®
and “Save” on
Macintosh menus, but in this manual it is shown merely as “Save.
TERMS USED IN THIS MANUAL
This manual assumes that your computer’s operating system (Windows
®
95/98/NT or
Mac OS) as well as other necessary software such as device drivers have been
installed, and are operating properly.
If you are using a Windows
®
OS, click the Start button, point to Settings, and click
Control Panel. Double-click the System icon, then click the Device Manager tab.Verify
that the name of your SCSI host adapter is displayed in the tree shown under the SCSI
Controller icon.
8
SYSTEM REQUIREMENTS
The system requirements for the operation of this software are as shown below:
IBM PC/AT COMPATIBLE COMPUTERS
CPU
OS
Intel Pentium 90 MHz or higher
1
Adaptec:
AVA-1505AE
AHA-1510B
AHA-1520B
AHA-1540CP
AHA-8945
AVA-2902E
AVA-2904E
AHA-2910B
AHA-2920C
AHA-2930C
AHA-2930U
AHA-2930U2
AHA-2940
AHA-2940U
AHA-2940AU
AHA-2940UW
AHA-2940U2W
RAM
HARD DISK SPACE
MONITOR
CD-ROM DRIVE
RECOMMENDED
SCSI HOST
ADAPTERS
APPLICATIONS
COMPATIBLE WITH
THE OPERATION OF
TWAIN DRIVERS
Windows
®
95 (including OSR2)/98/NT4.0
2
32 MB or more of free hard disk memory for use as workspace
VGA (640 x 480 dots) or higher/High Colour (16-bit)
Required for installation only
Adobe Photoshop
Ver. 3.0.5/4.0.1/5.0.1/5.0.2
A minimum of 32 MB of RAM
1
Not including computers built from kits, shop-brands or other computers for which
components have been selected and assembled individually.
2
Windows
®
NT users should manually set their virtual memory page-file size to a
minimum of 100 MB. Users who run several programs concurrently could find that their
computer requires more. For details on how to adjust your memory settings, please refer
to your NT manual or help files.
FOR WINDOWS
®
9
SYSTEM REQUIREMENTS
NOTE:
The setup program for this software will install the file Winaspi.dll ver. 4.57 on your computer’s system
(Windows
®
95 only). It is possible, however, that the installation of software for other SCSI devices
automatically reinstalls an older version that is not compatible with the Dimâge RD 3000 software. In the
event that your Dimâge RD 3000 software no longer operates properly after the installation of software
for some other SCSI device, please reinstall the Dimâge RD 3000 software.
Minolta does not guarantee the performance of this software when used with a SCSI host adapter not
included in the list shown to the left. Minolta’s guarantee is limited to the assurance that the Dimâge RD
3000 will operate properly in combination with any of the SCSI host adapters included in the list shown
to the left. It does not include any assurances regarding the SCSI host adapter itself nor problems
caused by the SCSI host adapter. Minolta cannot guarantee nor provide customer support for the
operation of the SCSI host adapter with your computer.
10
SYSTEM REQUIREMENTS
The system requirements for the operation of this software are as shown below:
FOR MACINTOSH
APPLE MACINTOSH SERIES COMPUTERS
CPU
OS
Power PC (Power Macintosh or Power Macintosh G3)
Excludes Mac OS compatibles.
Standard Internal SCSI host adapter
Units which have an expansion board inserted into the PCI bus or
NuBus to effect a connection are not compatible.
RAM
HARD DISK SPACE
MONITOR
CD-ROM DRIVE
RECOMMENDED
SCSI HOST
ADAPTERS
APPLICATIONS
COMPATIBLE WITH
THE OPERATION OF
THE ADOBE
PHOTOSHOP
PLUG IN
Mac OS 7.6 to Mac OS 8.5.1. QuickTime ver. 2.5 or later is required.
QuickTime ver. 3.0 or later is required to operate the slideshow function.
32 MB or more of free hard disk memory for use as workspace
13” (640 x 480 dots) or higher/32000 Colours
Required for installation only
Adobe Photoshop
Ver. 4.0.1/5.0.1/5.0.2
16 MB or more of free memory
11
SYSTEM REQUIREMENTS
NOTE:
Minolta does not guarantee the performance of this software when used with a SCSI host adapter not
included in the list shown to the left. Minolta’s guarantee is limited to the assurance that the Dimâge RD
3000 will operate properly in combination with any of the SCSI host adapters included in the list shown
to the left. It does not include any assurances regarding the SCSI host adapter itself nor problems
caused by the SCSI host adapter. Minolta cannot guarantee nor provide customer support for the
operation of the SCSI host adapter with your computer.
12
13
INTRODUCTION
14
INSTALLING THE SOFTWARE
Use the following procedure to install Dimâge RD 3000 software on your
computer.
FOR WINDOWS
®
95/98/NT
The following explanation refers to the hard disk drive as drive C and the CD-
ROM drive as drive D.
Be sure that the Dimâge RD 3000 is not connected to your computer when you
install the software.
Turn the computer on to start up Windows
®
.
1
Insert the Dimâge RD 3000 CD-
ROM in your computer’s disk
drive.
The Dimâge RD 3000 setup
program opens.
2
BE SURE THAT THE DIMÂGE RD 3000 IS NOT CONNECTED TO
YOUR COMPUTER WHEN YOU INSTALL THE SOFTWARE.
15
INSTALLING THE SOFTWARE
Click the Next button.
The Product License Agreement
opens. Please read the entire
agreement carefully before
continuing the installation.
If you cannot agree to the terms of
the Product License Agreement,
click the No button to exit the
Setup program.
3
Click the Yes button.
The files are copied to hard disk.
Once the necessary files have all
been copied, the Digita Desktop
setup program closes
automatically.
4
Click the Next button.
The Product License Agreement
opens. Please read the entire
agreement carefully before
continuing the installation.
If you cannot agree to the terms of
the Product License Agreement,
click the No button to exit the
Setup program.
5
16
INSTALLING THE SOFTWARE
Click the Yes button.
The installation destination folder is
displayed. If you wish to install the
software in a different folder, click
the Browse button.
6
Click the Next button.
The program files are copied to your computer’s hard disk. Before exiting the Setup
program, you will be asked if you wish to view the Readme file.
The Readme file contains important information not found in this manual. Be sure to
click the Yes button, and read the contents of this file carefully.
After clicking the Yes button, the Readme.txt file is opened in Notepad. At the same
time the Exit Program dialog box opens.
Click the OK button in the dialog box to finish the installation process, and after
viewing the Readme file, close Notepad.
7
17
INSTALLING THE SOFTWARE
It is assumed that the CD-ROM drive is drive D.
INSTALLING THE TWAIN DRIVER (WINDOWS)
Turn the computer on to start up Windows
®
.
1
While pressing the Shift key, insert the Dimâge RD3000 CD-ROM into
the CD-ROM drive.
This operation bypasses the auto-play function of CD-ROM.
2
Click on “Start” and click on “Run”.
3
Type D:\English\Twain\Setup.exe in the Open drop-down list, then click
on “OK”.
Setup program will begin.
4
Click on “Next >”, then follow the directions on the screen.
5
BE SURE THAT THE DIMÂGE RD3000 IS NOT CONNECTED TO
YOUR COMPUTER WHEN YOU INSTALL THE TWAIN DRIVER.
18
INSTALLING THE SOFTWARE
Before you begin
Virus protection tools and control panel documentation can be the cause of
problems during installation.These programs should be removed from your
system or temporarily disabled during installation.
The installation program does not operate properly on Japanese systems
using Japanese-language versions of QuickTime. Either remove the
Japanese-language version, and install the English-language version of
QuickTime before using the installation program, or manually drag into the
installation folder the files shown in the Where to Find the Files section on
page 21.
FOR MACINTOSH
Be sure that the Dimâge RD 3000 is not connected to your computer when you
install the software.
Turn on the Macintosh.
1
Once the desktop opens, insert the Dimâge RD 3000 CD-ROM in your
computer’s disk drive.
2
Once the CD-ROM is mounted, double-click the icon.
3
Double-click the ENGLISH icon.
The Dimâge RD 3000 Installer icon is displayed.
4
19
INSTALLING THE SOFTWARE
Double-click the Dimâge RD 3000 Installer icon.
The Software License Agreement is displayed. Please read the entire agreement
carefully before continuing the installation.
Click the Save button to save the contents of the Software License Agreement as a
text file. Click the Print button to print out the contents of the Software License
Agreement.
If you cannot agree to the terms of the Software License Agreement, click the
Decline button to exit the installer.
5
Click the Agree button.
The Easy Install window opens.
If you are installing the software for the first time, leave the Easy Install settings as
they are, and proceed to the next step.
If you wish to install only the Dimâge RD 3000 components or only the Digita
Desktop components, from the pop up menu select Dimâge RD 3000 Components
Only or Digita Desktop Components Only and proceed to the next step.
6
20
INSTALLING THE SOFTWARE
Select the installation type.
Click to select an existing folder
or create a new folder in which
the software is to be installed.
Drive and folder in which the
software is to be installed.
Click the Install button.
The software installation begins. Follow the instructions that appear on the screen.
Once the software installation is complete, the Digita Desktop installer opens
automatically.
If on the previous page, "Only the component for Dimâge RD 3000" was selected
from the pop-up menu, skip steps 8 through 10 shown below and proceed directly
to step 11.
7
Click the Continue button.
The Software License Agreement is displayed. Please read the entire agreement
carefully before continuing the installation.
Click the Save button to save the contents of the Software License Agreement as a
text file. Click the Print button to print out the contents of the Software License
Agreement.
If you cannot agree to the terms of the Software License Agreement, click the
Disagree button to exit the installer.
8
Click the Agree button.
The Easy Install window opens.The drive and folder in which the software is to be
installed is displayed at the bottom left of the window.
9
Confirm the current selection, select a different folder or create a new
folder.
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147

Konica Minolta DIMAGE RD 3000 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI