Pyle PDA35BT User manual

Type
User manual

Pyle PDA35BT lets you wirelessly stream audio from your favorite devices via Bluetooth. Connect your headphones to the 1/4" headphone jack for an immersive listening experience or use the 3.5mm (AUX) jack to connect additional external devices. Control the volume and switch between inputs with the rotary knob and button on the front panel. Enjoy clear and powerful sound with a maximum output of 100 watts and a frequency response of 20-20kHz.

Pyle PDA35BT lets you wirelessly stream audio from your favorite devices via Bluetooth. Connect your headphones to the 1/4" headphone jack for an immersive listening experience or use the 3.5mm (AUX) jack to connect additional external devices. Control the volume and switch between inputs with the rotary knob and button on the front panel. Enjoy clear and powerful sound with a maximum output of 100 watts and a frequency response of 20-20kHz.

Thank you for purchasing the PYLE Audio PDA35BT Class T Digital Audio Power Amplifier. This amplifier features the
Tripath TP2050 chipset that provides 50W contin uous power per channel (100W total) into an 8 ohm load. Class T
amplifiersusesTripath’sproprietaryDigitalPowerProcessingTechnologyoffertheaudiofidelityofa
ClassABamplifier
whileprovidingthepowerefficiencyofaClassD.
FrontPanel:
1.PowerLED
RedpowerLEDindicatestheunitisreceivingpowerandisfullyoperational.
2.BluetoothLED
BlueBluetoothLEDindicatestheunitisreceivingtheBTsignal.
3.BT/LINEInputSwitch
ModebuttonswitchesbetweentheBluetoothandLineaudioinputs.PushinisforBluetoothfunction,and
pushoutis
forlineaudioinput.
4.1/4''HeadphoneJack
The PDA35BT is a high fidelity headphone amplifier that will drive any headphone easil y and delivers colossal sound
stageandeffortlessdynamicrang.The1/4''stereojackallowsconnectionoflargerhomeandstudio‐styleheadphones.
Anadapteris
alsoprovidedsothatsmaller3.5mmpersonnelstyleheadphonescanbeused.
Note:Whenheadphonesarepluggedintotheheadphonejack,thespeakeroutputconnectionsaredisconnected.
5.Power/VolumeControl
Thiscontrolturnsontheunitandadjuststhevolumeleveloftheamplifier.Whentheunitisturned
on, thepowerLED
will became fully illuminated. To turn the unit off, turn the control fully counterclockwise until it “clicks” to the off
position.ItisnormalforthepowerLEDtoslowlydimandthengocompletelyoutwhentheunitisfirstturnedoff.
6.3.5mm
Aux/AudioInput
The unit features a convenient front mounted 3. 5mm stereo input for quick connection of iPods, MP3 players, and
otherportableaudiodevices.
RearPanel:
7.BluetoothAntenna
UsingtheantennaisbestreceivingforBluetoothsignal.
8.SpeakerOutputs
Thespeaker output connections utilize highcurrent banana plugreceptacles that are spaced on3/ 4''centersand are
compatiblewithstandarddoublebananaplugconnectors(soldseparately).The connectionsarecolorcodedfor
easy
polarityidentification.Highqualityscrew‐onbananaplugsthatwillaccept10AWG‐18AWGwireareincluded
9.RCA‐TypeAudio/LineInput
RCA‐typelinelevelinputforpermanentconnectionoflargerdevicessuchasCDplayers,PCs,andDVDplayers.AnRCA
to 3. 5mm adapter is also provided
for added connection flexibility. Note: When a device is plugged into the front
mounted3.5mminput,theRCAinputjacksaredisconnected.
10.PowerConnection
The PDA35BT operates on 24VDC and MUST be used with a power supply that can provide at least 5A. A world
compatible(100V‐240V)switchmodepowersupplyisincludedwiththeunitandissuppliedwithaU.S.Astylecord.To
operateinother
countriesanappropriatepowercordwillneedtobepurchased.Thepowerconnectionontheunitisa
2. 5mm x 5. 5mm jack with center pin being positive. Note: if an inappropriate power supply is used and the unit is
damaged,thewarrantywillbevoided.Ensurethatthe
amplifierispowereddown.Locatethebananaplugsandremove
theprotectiverubberboots.Loosenthesetscrewsusingasmallstraightbladescrew
ConnectingyourloudspeakerstothePDA35BT:
Remove approximately 1/ 2'' of the insulation from your speaker wire positive and negative conductors. Slide the
appropriatecolored(red
forpositive,blackfornegative)rubberbootoverthespeakerwire.Inserttheconductorsinto
thebananaplugsandtightenthesetscrewsandslideprotectiverubberbootsbackintoplace.Whileobservingproper
polarityinsertbananaplugsintothespeakeroutputreceptaclesonthebackofthePDA35BT.
BLUETOOTH
OPERATIONINSTRUCTION:
Externaldeviceswhich haveabuilt‐ in Bluetooth feature canbeconnected tothisamplifier wirelessly to play through
theamplifier’sspeakers.
1.Atfirstbesurethattheamplifierispoweredon,andturnthevolumetotheLOWposition.Andit’sbettertopullthe
BluetoothAntennaon
atthebackpanelforbetterreceiving.
2.PresstheBT/Linebuttonswitchinonthefrontpanel,youwillhearthevoice“POWERON”andalsoPAIRING”,and
thentheunitisautomaticallyreadytopairwithyourexternal device.
3.TurnontheBluetoothofyourexternaldeviceslike
Smartphone,Computer,andothers,etc.
4.Search for available Bluetoothdevices within range of your external device and wait for your device to select BT‐
RY”onthepairingdeviceslists.
5.AndsecondslaterwhenyouheardavoiceYourDeviceisConnected”,then theBluetoothpairingissuccess.
6.You
cannowplaymusiconyourexternaldevicethroughtheamplifier.
Features:
Model:PDA35BT
BuiltinBluetoothforWirelessAudioStreaming
WorkswithAllofYourFavoriteDevices
(iPhone,Android,Smartphone,iPad,Tablet,etc.)
1/4''HeadphoneJack(DoublesasHeadphoneAmp)
3.5mm(AUX)InputConnectorJack
AbilitytoConnectAdditionalExternalDevices
LEDIndicatorLights
RotaryKnobVolumeControl
BluetoothButtonActivation
SpeakerInput:Banana
PlugSpeakerConnectors
SpeakerOutput:RCA(L/R)ConnectorJacks
ShortCircuit,ThermalandOverloadProtection
Mini/CompactAmp
TechnicalSpecs:
MAXPowerOutput:100Watt
RMSPowerOutput:50Wattx2@8Ohm
T.H.D.:<0.01%@30Watt,<5.0%@50Watt
BluetoothVersion:4.0
BluetoothWireless
Range:30'Feet
BluetoothNetworkName:'BTRY'
BluetoothPassword:'BTRY'
ClassTAmpDesign
Min.SpeakerImpedance:6Ohm
S/NRatio:103dB,AWeighted
InputImpedance:2KOhm+/5%
FrequencyResponse:2020kHz
ChannelSeparation:95dB
DynamicRange:>100dB
Efficiency:85%
PowerRequirement:24VDC,5A
Worldwide
Compatibility:100240V,Switchable
Dimensions(HxWxD):1.9''x3.6''x4.9''
Weight:1.06lbs.
AccessoriesIncluded:
(2)PairScrewTypeBananaPlugSpeakerConnectors
3.5mmto1/4''StereoHeadphoneAdapter
3.5mmtoDualRCA'Y'ConnectorCable
3.5mmAudioInputCable
WallPlugPowerAdapter
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Pyle PDA35BT User manual

Type
User manual

Pyle PDA35BT lets you wirelessly stream audio from your favorite devices via Bluetooth. Connect your headphones to the 1/4" headphone jack for an immersive listening experience or use the 3.5mm (AUX) jack to connect additional external devices. Control the volume and switch between inputs with the rotary knob and button on the front panel. Enjoy clear and powerful sound with a maximum output of 100 watts and a frequency response of 20-20kHz.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI