Bluetooth Power Amplifier Music Player for Home/Car
How to use
1. Connect speakers to the output of amplifier.
2. Wired input: Connect the audio device to the RCA or 3.5mm
AUX input. Or insert U-disk or SD Card(MMC). (Also support FM
Radio input.)
Wireless input: Turn on Bluetooth on your phone, search and click to connect.
3. Then select the input mode and connect power adapter and then plug the
power cable into the socket, and then power on the amplifier.
4. Adjust the volume, treble or bass according to your listening preference.
5. After use, please disconnect the power adapter.
Parameters
Audio input: Bluetooth/U-disk/Stereo RCA/3.5mm AUX/FM
Radio/SD Card
Audio output: Speaker jacks
Input Power: DC 12V, ≥3A
Output power: 45W x 4 RMS to 4 Ohm
Speaker impedance: 4-8 Ohm
Minimum THD: ≤0.4%
SNR: ≥80dB