Canon MPC600F/400 User manual

Canon

SmartBase MPC600F/400

Fax Guide

This equipment conforms with the essential requirements of

EC Directive 1999/5/EC.

We declare that this product conforms with the EMC requirements

of EC Directive 1999/5/EC at nominal mains input 230V, 50Hz

although the rated input of the product is 200V-240V, 50/60Hz.

If you move to another EU country and are experiencing trouble

please call the Canon Help Desk.

(For Europe Only)

i

Using Your Documentation

Your machine includes the following documentation. This documentation has been designed so that you can

easily use your machine to suit your particular needs.

Documentation is included on the CD-ROM in PDF form.

Copyright

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without

the prior written permission of Canon, Inc.

Setting up the machine........................................

Software installation ............................................

Components of the machine ...............................

Basic operation of the machine ..........................

Summary of settings ............................................

Quick Start Guide

Document and paper handling............................

Making copies.......................................................

Maintenance..........................................................

Troubleshooting feed and copy issues..............

Reference Guide

Sending and receiving faxes ...............................

Speed dialling .......................................................

Troubleshooting fax issues.................................

Fax Guide

MPC600F model only

Controlling the machine from your PC...............

MultiPASS Suite for

Windows

®

Software

User’s Guide

• H12219 (MPC600F)

Model Name

ii

Trademarks

Canon and BJ are registered trademarks. BCI, Bubble Jet, MultiPASS, and UHQ are trademarks of Canon Inc.

All other product and brand names are registered trademarks, trademarks or service marks of their respective

owners.

Super G3 is a phrase used to describe the new generation of fax machines that use ITU-

T V.34 standard 33.6 Kbps* modems. Super G3 High Speed Fax machines allow

transmission time of approximately 3 seconds* per page which results in reduced

telephone line charges.

* Approximately 3 seconds per page fax transmission time based on Canon FAX Standard Chart No. 1

(Standard Mode) at 33.6 Kbps modem speed. The Public Switched Telephone Network (PSTN) currently

supports 28.8 Kbps modem speeds or lower, depending on telephone line conditions.

iii

Contents

Chapter 1: Introduction

Customer Support ...................................... 1-1

Operation Panel ......................................... 1-1

Standby Display ......................................... 1-2

Chapter 2: Registering Information

Methods of Registering Information in the

Machine...................................................... 2-1

Guidelines for Entering Numbers, Letters,

and Symbols .............................................. 2-1

Correcting a Mistake............................... 2-2

Registering Sender Information ................. 2-3

What is Sender Information? ................. 2-3

Entering the Date and Time.................... 2-4

Registering Your Fax/Telephone Number

and Name............................................... 2-4

Printing a List to Check Information

Registered in Your Machine ................... 2-5

Setting the Telephone Line Type .............. 2-6

Dialling Through a Switchboard ................ 2-6

Chapter 3: Speed Dialling

What is Speed Dialling? ............................ 3-1

Speed Dialling Methods.......................... 3-1

One-Touch Speed Dialling ........................ 3-2

Registering Numbers for One-Touch

Speed Dialling ........................................ 3-2

Changing/Deleting a One-Touch Speed

Dialling Entry .......................................... 3-3

Coded Speed Dialling................................. 3-4

Registering Numbers for Coded Speed

Dialling.................................................... 3-4

Changing/Deleting a Coded Speed

Dialling Entry .......................................... 3-5

Group Dialling ............................................ 3-7

Creating Groups ..................................... 3-7

Speed Dialling Lists ................................... 3-9

Printing Speed Dialling Lists................... 3-9

Chapter 4: Sending Faxes

Preparing to Send a Fax.............................4-1

Documents You Can Fax........................4-1

Adjusting the Quality of Your Faxes ....... 4-1

Dialling Methods .....................................4-3

Sending Methods........................................4-6

Memory Sending.....................................4-6

Manual Sending Via the Handset ...........4-8

Cancelling Sending.....................................4-9

Redialling When the Line is Busy ............. 4-10

Manual Redialling .................................4-10

Automatic Redialling ............................4-10

Sequential Broadcasting...........................4-11

Delayed Sending .....................................4-13

Documents Stored in Memory .................4-13

Printing a List of Documents in

Memory ................................................4-13

Printing a Document in Memory ...........4-14

Deleting a Document from Memory ...... 4-15

Checking a Document’s Details ........... 4-15

Chapter 5: Receiving Faxes

Different Ways to Receive a Fax ............... 5-1

Setting the Options for FAX⁄TEL

AUTO SW ...............................................5-2

Receiving Faxes Manually..........................5-4

Receiving Faxes to the MultiPASS Suite.... 5-5

Polling Receiving ........................................5-5

Receiving While Performing Other Tasks .. 5-6

Receiving Faxes in Memory When a

Problem Occurs..........................................5-6

Cancelling Receiving .................................5-6

Chapter 6: Special Features

Special Dialling ..........................................6-1

Dialling an Overseas Number

(With Pauses) .........................................6-1

Switching Temporarily to Tone Dialling .. 6-2

Confirming a Dial Tone ...........................6-2

Dialling Through a Switchboard ............. 6-3

Restricting Use of Your Machine ................ 6-3

iv

Chapter 7: Reports and Lists

Summary of Reports and Lists .................. 7-1

ACTIVITY REPORT ................................... 7-2

TX (Transmission) REPORT...................... 7-3

MULTI TX/RX (Transaction) REPORT... 7-4

RX (Reception) REPORT .......................... 7-4

Chapter 8: Troubleshooting

LCD Messages .......................................... 8-1

Faxing Problems ........................................ 8-3

Sending Problems .................................. 8-3

Receiving Problems................................ 8-4

Telephone Problems .................................. 8-6

If a Power Cut Occurs ............................... 8-7

If You Cannot Solve the Problem............... 8-7

Chapter 9: Summary of Settings

Understanding the Menu System .............. 9-1

Accessing the Menus ............................ 9-1

Menus in FAX Mode............................... 9-2

Appendix: Specifications

Facsimile ...................................................A-1

Telephone ..................................................A-1

Index........................................................... I-1

v

Type Conventions Used in This Guide

Please read the list below of symbols, terms, and abbreviations used in this guide.

• Indicates a warning concerning operations that may lead to death or injury to persons or damage to property

if not performed correctly. In order to use the machine safely, always pay attention to these warnings.

• Indicates operational warnings and restrictions. Be certain to read these items to operate the machine correctly, and

to avoid damage to the machine.

• Indicates notes for operation or additional explanations. Reading these is highly recommended.

In addition, this guide uses distinctive typefaces to identify buttons and information in the LCD:

• The buttons you press appear in this typeface: Stop/Reset.

• Information in the LCD appears in this typeface: USER SETTINGS.

(→ p. n-nn) A number preceded by an arrow and enclosed in parentheses references a page

number in this guide which contains more information on the topic of the previous

sentence.

→ Quick Start Guide Refer to the Quick Start Guide for details on the topic of the previous sentence.

→ Reference Guide Refer to the Reference Guide for details on the topic of the previous sentence.

→ MultiPASS Suite

User’s Guide

Refer to the MultiPASS Suite for Windows

®

Software User’s Guide for details

on the topic of the previous sentence.

machine The word “machine” is the general term used to represent the MPC600F.

default A setting that remains in effect unless you change it.

document or fax The original sheet(s) of paper you send or receive with the machine.

menu A list of settings from which you select an item to set up or change. A menu has a

title which appears in the LCD.

Available menus and the display differ depending on the current mode (Copy,

Fax, or Scan Mode). This guide shows the display in Fax Mode as an example.

transaction number When you send or receive a document, your machine automatically assigns the

document a unique transaction number. A transaction number is a four-digit

number that will help you keep track of documents you send and receive.

TX/RX NO. TX/RX NO. is the abbreviation used for Transaction number.

TX Denotes Sending.

RX Denotes Receiving.

1-1

1

Introduction

Chapter 1

Introduction

Customer Support

Your machine is designed with the latest technology to provide trouble-free operation. If you encounter a

problem with the machine’s operation, try to solve it by using the information in Chapter 8. If you cannot solve

the problem or if you think your machine needs servicing, contact your local authorised Canon dealer or the

Canon help line.

Operation Panel

This section describes buttons used when sending and receiving faxes. For buttons not described here, →

Reference Guide.

ABC

Copy Fax Scan

DEF

Colour

/B&W

Coded Dial

Hook

D.T. Polling R

Enlarge/

Reduce

Redial/Pause

Paper Select

Contrast

Image Quality

123

JKL MNO

456

TUV

GHI

PQRS WXYZ

789

T

0

ON/OFF

Menu

OK

In Use/ Memory Alarm

Resume

01 02 03 04

05 06 07 08

09

ON/OFF Button

Turns the machine on and off.

Resume Button

Resumes sending or receiving faxes after an error is corrected. Also ejects

a document remaining in the ADF.

LCD

Displays messages and selections, and prompts during operation.

In Use/Memory Light

Blinks when the machine is using the telephone line. Lights

when there are documents in memory.

Alarm Light

Flashes when an error

occurs, or when the machine

is out of paper or ink.

Fax Button

Switches the standby

display to Fax Mode.

Colour/B&W Button

Sets the machine for colour or black

& white transmission. For colour

transmission, press this button to

turn on its light.

→ P. 1-2

(Stop/Reset) Button

Cancels sending/receiving faxes and other

operations, and returns the machine to standby

mode.

(Start) Button

Starts sending or receiving faxes.

Numeric Buttons

Enter numbers when dialling or

registering fax/telephone

numbers. Also enter charaters

when registering names.

T ( ) Button

Connects to information

services that accept tone

dialling only, even if you are

using a rotary pulse.

Image Quality Button

Selects the fax resolution.

Contrast Button

Adjusts the fax contrast.

Paper Select Button

Selects the paper

size for received

faxes (→ Reference

Guide.

OK Button

Selects and confirms

settings.

(-), (+) Buttons

Scroll through selections. Also, clears an entry and enters a space between characters.

Menu Button

Displays the menu to customise operation of your machine.

▲

▼

▲

▼

1-2

Standby Display

The standby display differs depending on which mode is selected. When the machine is turned on, the Copy

Mode standby display appears. You can switch Copy Mode to Fax Mode by pressing Fax.

The standby display in Fax Mode is as follows:

• The standby display in Copy Mode and Scan Mode are, → Reference Guide.

■ Fax Mode

D.T. Polling R

01 02 03 04

05 06 07 08

09

Coded Dial

Hook

Redial/Pause

Hook Button

Engages or

disengages the

telephone line.

Coded Dial Button

Press this button and a two-

digit code to dial a pre-

registered fax/telephone

number or group.

Redial/Pause Button

Redials the last number that was dialled with the numeric

buttons. Also enters pauses between or after the fax/

telephone number when dialling or registering numbers.

R Button

Dials the outside line access number when

the machine is connected through a

switchboard (PBX).

Polling Button

Polls another fax machine.

D.T. Button*

Confirms the dial tone when dialling a fax/telephone number

* This feature is only available for some countries

One-Touch Speed Dial Buttons

Dial fax/telephone numbers pre-registered for one-touch speed dialling

20/12 2002 FRI 15:30

FaxOnly STANDARD

Receive Mode Image Quality

Date & Time

2-1

2

Registering Information

Chapter 2

Registering Information

Methods of Registering Information in the Machine

To customise the machine to your particular needs, you can adjust the general operation, sending, receiving,

printing, system settings, and speed dialling settings. There are two methods of adjusting these settings:

■ Method 1: Using the Operation Panel

You can adjust settings directly via the operation panel of the machine. Detailed instructions are described

in this guide. Adjusting settings through the operation panel is convenient when you do not have your

machine connected to a PC.

■ Method 2: Using the MultiPASS Suite Software

You can adjust settings using the MultiPASS Suite software included with your machine. For instructions,

→ MultiPASS Suite User’s Guide.

Guidelines for entering Numbers, Letters, and

Symbols

When you come to a step that requires you to enter a name or number, refer to the table below to determine

which numeric button to press for the character you want:

• If you pause for more than two minutes between entering data, the machine will automatically return to standby

mode.

0

ABCÅÄÁÀÃÂÆÇ abcåäáàãâæç 2

WXYZY wxyzy 9

TUVÜÚÙÛ tuvüúùû 8

PQRS pqrs 7

MNOÑØÖÓÒÕÔ mnoñøöóòõô 6

JKL jkl 5

GHIÏÍÌÎ ghiïíìî 4

DEF-DËÉÈÊ defdëéèê 3

1

PQRS

7

TUV

8

WXYZ

T

9

GHI

4

JKL

5

MNO

6

ABC

2

DEF

3

0

–.A #!",;:^`_=⁄|’?$@%&+()[]{}<>

#

Button Uppercase Letter

Mode (

:A)

Lowercase Letter

Mode (:a)

Number Mode (

:1)

Uppercase Letter

Mode (

:A)

Lowercase Letter

Mode (

:a)

Number Mode (

:1)

2-2

■ Entering Letters

1 Press to switch to uppercase letter mode (:A) or

lowercase letter mode (:a).

2 Press the numeric button that contains the letter you want.

• Press repeatedly until the letter you want appears. Each button

cycles through the letters it contains.

• If you are unsure which button to press for the letter you want,

→ p. 2-1.

3 Continue entering other letters using the numeric buttons.

• If the next letter you want to enter is under a different numeric

button, simply press that button until the letter you want

appears.

-or-

If the next letter you want to enter is under the same numeric

button you pressed in step 2, use to move the cursor to the

right. Then press that same numeric button repeatedly until the

letter you want appears.

• Use to enter a space and move the cursor to the right.

■ Entering Numbers

1 Press to switch to number mode (:1).

2 Press the numeric button that contains the number you

want.

• Use to enter a space and move the cursor to the next digit.

3 Continue entering other numbers using the numeric

buttons.

■ Entering Symbols

1 Press repeatedly until the symbol you want appears.

2 If you want to enter another symbol, use to move the

cursor to the right, then press repeatedly until the

symbol you want appears.

■ Correcting a Mistake

If you make a mistake while entering letters or numbers, you can correct it by using .

■ To Delete the Last Letter/Number

Press once to delete the last letter or the last number you entered.

■ To Delete All Letters/Numbers

Press and hold to delete all letters or all numbers you entered.

Ex:

UNIT NAME :A

Ex:

UNIT NAME :A

C

Ex:

UNIT NAME :A

CA

▼

Ex:

UNIT NAME :1

Ex:

UNIT NAME :1

1

▼

Ex:

UNIT NAME :1

10

Ex:

UNIT NAME :1

#

Ex:

UNIT NAME :1

#-

▼

▲

2-3

2

Registering Information

Registering Sender Information

■

What is Sender Information?

When you receive a fax, the name of the person or company who sent you the fax, their fax/telephone number,

and the date and time of transmission may be printed in small type at the top of each page. This information is

called the Sender information or the Transmit Terminal Identification (TTI). Similarly, you can register your

details in your machine so that whenever you send a fax, the other party knows who sent it, and when it was

sent. Below is an example of how your sender information would print on a fax sent from your machine:

• You can set the sender information to print inside or outside the image area. (→ TTI POSITION, p. 9-4)

• You can enter the sender information from the operation panel (→ following page) or from the MultiPASS Suite.

(→ MultiPASS Suite User’s Guide)

27/12 2002 15:33 FAX 123 4567 CANON CANON CANADA 001

THE SLEREXE COMPANY LIMITED

SAPORS LANE•BOOLE•DORSET•BH25 8ER

TELEPHONE BOOLE (945 13) 51617 – FAX 1234567

Our Ref. 350/PJC/EAC

DATE AND TIME

Date and time of

transmission.

FAX/TELEPHONE

NUMBER

Your fax/telephone

number.

You can select FAX or

TEL to be displayed in

front of the number.

(→ TELEPHONE #

MARK, p. 9-4)

UNIT NAME

Your name or

company name.

DESTINATION

If you used memory sending and dialled the fax

number using one-touch or coded speed

dialling, the other party’s name appears here.

PAGE NUMBER

The page number

of the fax.

2-4

■ Entering the Date and Time

1 Press Menu.

2 Use or to select FAX SETTINGS.

3 Press OK three times.

The date and time currently set for the machine are displayed.

4 Use the numeric buttons to enter the correct day, month,

year, and time in this order.

•Use or to move the cursor under the number you want

to change, then press the numeric button.

• Enter only the last two digits of the year.

• Use the 24-hour format for the time (e.g., 1:00 p.m. as 13:00).

5 Press OK.

6 Press Stop/Reset to return to standby mode.

■ Registering Your Fax/Telephone Number and Name

1 Press Menu.

2 Use or to select FAX SETTINGS.

3 Press OK twice.

4 Use or to select UNIT TELEPHONE #.

5 Press OK.

6 Use the numeric buttons to enter your fax/telephone

number (max. 20 digits, including spaces).

• If your fax/telephone number has already been registered, the

number appears.

•Use

to enter a space.

• To enter a plus sign (+) before the number, press .

• If you make a mistake, press

to delete the last number or

press and hold

to delete all numbers you entered.

Ex:

MENU

5.FAX SETTINGS

▲

▼

FAX SETTING

1.USER SETTINGS

USER SETTINGS

1.DATE & TIME

Ex:

DATE & TIME

20/12 2002 15:10

Ex:

DATE & TIME

27/12 2002 22:30

▲

▼

DATE & TIME

DATA ENTRY OK

USER SETTINGS

2.DATE SETUP

Ex:

MENU

5.FAX SETTINGS

▲

▼

FAX SETTINGS

1.USER SETTINGS

USER SETTINGS

1.DATE & TIME

USER SETTINGS

3.UNIT TELEPHONE #

▲

▼

Ex:

UNIT TELEPHONE #

TEL=

Ex:

UNIT TELEPHONE #

TEL= 123 4567

▼

▲

2-5

2

Registering Information

7 Press OK twice.

8 Use the numeric buttons to enter your name or company

name (max. 24 characters, including spaces).

• If you are unsure how to enter characters, → p. 2-1.

• If you have already registered your name or company name, the

previous entry will be displayed. To change your name, press

and hold

to delete the previous entry and re-enter.

9 Press OK.

10 Press Stop/Reset to return to standby mode.

■ Printing a List to Check Information Registered in Your

Machine

You can print the USER’S DATA LIST to check the sender information and current settings of your machine.

1 Press Menu.

2 Use or to select REPORTS/LISTS.

3 Press OK.

4 Use or to select USER DATA LIST.

5 Press OK.

• The machine prints the USER’S DATA LIST.

The sender information is shown at the beginning of the list. The current settings of the machine are listed after

this.

UNIT TELEPHONE #

DATA ENTRY OK

USER SETTINGS

4.UNIT NAME

Ex:

UNIT NAME :A

Ex:

UNIT NAME :A

CANON

▲

Ex:

UNIT NAME :A

DATA ENTRY OK

USER SETTINGS

5.TX TERMINAL ID

Ex:

MENU

3.REPORTS/LISTS

▲

▼

REPORTS/LISTS

1.ACTIVITY REPORT

REPORTS/LISTS

3.USER DATA LIST

▲

▼

PRINTING REPORT

27/12 2002 16:40 FAX 123 4567 CANON 001

✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱

✱✱✱

USER’S DATA LIST ✱✱✱

✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱✱

FAX SETTINGS

USER SETTINGS

DATE SETUP DD/MM YYYY

UNIT TELEPHONE # 123 4567

UNIT NAME CANON

TX TERMINAL ID ON

TTI POSITION OUTSIDE IMAGE

TELEPHONE # MARK FAX

OFFHOOK ALARM ON

2-6

Setting the Telephone Line Type

Before using your machine, you need to make sure it is set for your telephone line type. If you are unsure of

your telephone line type, check with your local telephone company. The factory default setting of your

machine varies depending on the current country selection. You can print the USER’S DATA LIST to check

the current setting. (→ p. 2-5)

If you need to change the setting, follow this procedure.

1 Press Menu.

2 Use or to select FAX SETTINGS.

3 Press OK twice.

4 Use or to select TEL LINE TYPE.

5 Press OK.

6 Use or to select the telephone line type setting you

want to set.

• You can select from the following:

- ROTARY PULSE (For pulse dialling)

- TOUCH TONE (For tone dialling)

7 Press OK.

8 Press Stop/Reset to return to standby mode.

Dialling Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through

a PBX or other telephone switching system, you have to dial the outside line access number first, and then the

number of the party you are calling.

To facilitate this procedure, you can register the PBX access type and the outside line access number under the

R button so that you only need to press this button before dialling the fax/telephone number you want to reach.

See below for details.

The settings available and the factory default setting vary depending on the current country selection. You can

print the USER’S DATA LIST to check the current setting. (→ p. 2-5)

1 Press Menu.

2 Use or to select FAX SETTINGS.

Ex:

MENU

5.FAX SETTINGS

▲

▼

FAX SETTINGS

1.USER SETTINGS

USER SETTINGS

1.DATE & TIME

USER SETTINGS

9.TEL LINE TYPE

▲

▼

Ex:

TEL LINE TYPE

TOUCH TONE

Ex:

TEL LINE TYPE

ROTARY PULSE

▲

▼

USER SETTINGS

10.R-KEY SETTING

Ex:

MENU

5.FAX SETTINGS

▲

▼

2-7

2

Registering Information

3 Press OK twice.

4 Use or to select R-KEY SETTING.

5 Press OK.

6 Use or to select PBX.

7 Press OK.

8 Use or to select the access type of your switching

system.

❚ If you selected HOOKING or EARTH CONNECTION in step 8:

9 Press OK.

10 Press Stop/Reset to return to standby mode.

❚ If you selected PREFIX in step 8:

9 Press OK.

10 Use the numeric buttons to enter the outside line access

number (max. 19 digits).

11 Press Redial/Pause to enter a pause.

12 Press OK.

13 Press Stop/Reset to return to standby mode.

FAX SETTINGS

1.USER SETTINGS

USER SETTINGS

1.DATE & TIME

USER SETTINGS

10.R-KEY SETTING

▲

▼

R-KEY SETTING

PSTN

R-KEY SETTING

PBX

▲

▼

Ex:

PBX

EARTH CONNECTION

Ex:

PBX

HOOKING

▲

▼

FAX SETTINGS

2.REPORT SETTINGS

PREFIX

Ex:

PREFIX

1234576

Ex:

PREFIX

1234576P

FAX SETTINGS

2.REPORT SETTINGS

2-8

3-1

3

Speed Dialling

Chapter 3

Speed Dialling

What is Speed Dialling?

Speed dialling allows you to simplify dialling procedures by registering a fax/telephone number(s) and name

under a button or code. You can then dial that number by pressing only one or a few buttons.

■ Speed Dialling Methods

The three speed dialling methods available with your machine are as follows:

■ One-Touch Speed Dialling (→ p. 3-2)

Allows you to dial a fax or telephone number by pressing only one button. You can register up to nine

destinations for one-touch speed dialling.

■ Coded Speed Dialling (→ p. 3-4)

Allows you to dial a fax or telephone number by pressing Coded Dial followed by a two-digit code of your

choice. You can register up to 100 different destinations.

■ Group Dialling (→ p. 3-7)

Allows you to dial a group of registered one-touch and/or coded speed dialling fax numbers. By registering

a group for one-touch or coded speed dialling, you press only one or a few buttons to send the same

document to several destinations.

The following pages describe how to register numbers for speed dialling.

• For instructions on dialling using the speed dialling methods, → p. 4-3.

• You can also register numbers for speed dialling from the MultiPASS Suite. (→ MultiPASS Suite User’s Guide)

3-2

One-Touch Speed Dialling

■

Registering Numbers for One-Touch Speed Dialling

1 Press Menu.

2 Use or to select TEL REGISTRATION.

3 Press OK twice.

4 Use or to select a one-touch speed dialling button

(01 to 09).

• If a one-touch speed dialling button has already been registered, the number registered under that button

appears.

• If a group is already registered under a one-touch speed dialling button, GROUP DIAL appears.

5 Press OK twice.

6 Use the numeric buttons to enter the fax/telephone number

you want to register (max. 120 digits, including spaces and

pauses).

•Use to enter a space and move the cursor to the next digit. Spaces are optional and are ignored during

dialling.

•Press Redial/Pause to enter a pause.

• If you make a mistake, press

to delete the last number, or press and hold to delete all numbers you

entered.

7 Press OK twice.

8 Use the numeric buttons to enter the name that goes with

the number (max. 16 characters, including spaces).

• If you do not want to register a name, ignore this step.

• If you are unsure how to enter characters, → p. 2-1.

Ex:

MENU

4.TEL REGISTRATION

▲

▼

TEL REGISTRATION

1.1-TOUCH SPD DIAL

Ex:

1-TOUCH SPD DIAL

01= 905 795 1111

Ex:

1-TOUCH SPD DIAL

04=

▲

▼

1-TOUCH SPD DIAL

1.TELEPHONE NUMBER

TELEPHONE NUMBER

TEL=

Ex:

TELEPHONE NUMBER

TEL=2 50921

▼

▲

TELEPHONE NUMBER

DATA ENTRY OK

1-TOUCH SPD DIAL

2.NAME

NAME :A

Ex:

NAME :A

Canon ITALIA

Page is loading ...

Canon MPC600F/400 User manual

Canon MPC600F/400 User manual

Related papers

Other documents