Duplo DBM-120 Installation guide

Duplo
Brand
Duplo
Model
DBM-120
Category
Wall & ceiling mounts accessories
Type
Installation guide

Duplo DBM-120 stapler folder is a versatile and efficient device designed to enhance your document finishing capabilities. With its ability to perform both saddle and side stapling, this machine offers flexible solutions for a wide range of paper sizes and thicknesses.

The DBM-120 excels in handling large volumes of documents, making it ideal for high-productivity environments such as offices, print shops, and educational institutions. Its user-friendly design, including an intuitive control panel and easy-to-adjust settings, ensures smooth operation and minimal downtime.

In addition to its core stapling functions, this machine features an array of accessories that expand its versatility. The paper guide roller unit ensures precise paper alignment, while the belt stacker provides reliable stacking of finished documents. The corner-stapling guide and side jogger enhance the accuracy and efficiency of the stapling process.

Duplo DBM-120 stapler folder is a versatile and efficient device designed to enhance your document finishing capabilities. With its ability to perform both saddle and side stapling, this machine offers flexible solutions for a wide range of paper sizes and thicknesses.

The DBM-120 excels in handling large volumes of documents, making it ideal for high-productivity environments such as offices, print shops, and educational institutions. Its user-friendly design, including an intuitive control panel and easy-to-adjust settings, ensures smooth operation and minimal downtime.

In addition to its core stapling functions, this machine features an array of accessories that expand its versatility. The paper guide roller unit ensures precise paper alignment, while the belt stacker provides reliable stacking of finished documents. The corner-stapling guide and side jogger enhance the accuracy and efficiency of the stapling process.

Provided By
http://www.MyBinding.com
http://www.MyBindingBlog.com
Duplo DBM-120
Stapler Folder
Installation Manual
Specialized person only
STAPLER FOLDER
DBM-120 Sheet by Sheet
INSTALLATION MANUAL
Do not leave this Installation Manual at the installation site after installation.
Furthermore, do not leave tools used for the installation, at the installation site.
Retain this Installation Manual for future reference as it will be needed for subsequent
maintenance such as relocation.
TO SERVICING PERSONNEL
TABLE OF CONTENTS
1. Points to Note in Installation ..........................1
1-1. Before Installing.......................................1
1-2. Installation Location.................................1
1-3. Power Supply...........................................1
1-4. Output Connector ....................................1
2. Installation Procedure ..................................... 2
2-1. Standard Accessories..............................2
2-2. Connecting the DSF-2000 .......................4
2-3. Attaching the Accessories .......................6
2-4. Connecting the Earth Wire.......................7
2-5. Connecting the Power Supply .................7
2-6. Checking the Installation Position............7
2-7. When Connecting the DBM-120T
(Checking the Product Number) ..............8
2-8. When Connecting the DBM-120T
(Connecting the Connecting Cable).........8
1
1-2. Installation Location
1. POINTS TO NOTE IN INSTALLATION
Install the equipment in a place where the floor is strong enough to bear the mass of the unit,
which is as follows:
91 kg (200.44 lb)
Requirements for installation space are as follows:
Width × Depth = 1280 × 550 mm (50.39 × 21.65")
Install the equipment in a horizontal and stable position.
Do not install the equipment near heaters or other heat-emitting appliances.
Install and use the equipment in an environment:
1-1. Before Installing
Turn off the unit, then unplug its power cord from the AC outlet.
Make sure that the power supply voltage and frequency in your area match the power
requirements indicated on the main name plate of the unit.
– where the temperature range is between 5 and 35°C,
– where the humidity range is between 20 and 85%
RH (no dew condensation),
– which is not subject to direct sunlight,
– which is subject to little or no vibration,
– where there are no harmful chemicals,
– which is reasonably free from dust,
– which is free from air-borne salt, and
– where the equipment will not be exposed to water.
1-3. Power Supply
This equipment shall be installed near the socket-outlet where the plug on the power supply
cord is easily accessible.
When you power other appliances from the same AC outlet, make sure that the combined
power consumption does not exceed the power supply capacity.
1-4. Output Connector
Connector for connecting cable: DC +5 V Max.
D-PORT connector: DC +6 V Max.
Connector for connecting cable
D-PORT connectors
2
Check that you have the following parts.
2-1. Standard Accessories
2. INSTALLATION PROCEDURE
STAPLER FOLDER
DBM-120 Sheet by Sheet
INSTRUCTION MANUAL
STAPLER FOLDER
DBM-120 Sheet by Sheet
INSTALLATION MANUAL
Specialized person only
y
q
u
w
i
e
o
!8
r
t
!9!5 !6 !7
Please store th s manual in a safe place for
future reference.
!0
!1 !2 !3
@0 @1
!4
3
No.
q
w
e
r
t
y
u
i
o
!0
!1
Qty. NameNo.
Qty.
!2
!3
!4
!5
!6
!7
!8
!9
@0
@1
Connecting cable 2 1
Power cord (only 220 to 240 V AC) 1
Power cord (only 120 V AC) 1
Earth wire 1 1
Earth wire 2 1
Cable clamp 3
Connecting plate 1
Screw (MSKW5 × 10) 4
Instruction manual 1
Installation manual 1
Saddle-stapled paper stacker 1
Side-stapled paper stacker 1
Belt stacker 1
Paper guide roller unit 1
Corner-stapling side jogger (right) 1
Tool for moving clincher 1
Guide unit 2
Paper holding guide unit 1
Paper holder 1
Corner-stapling guide 1
Connecting cable 1 1
Name
2. INSTALLATION PROCEDURE
4
Release the locks securing the bottom
plate of this unit and movable unit together
(2 each at the front and back).
Loosen the two screws of the fixing plate, and move
the fixing plate down and secure it.
NOTE : Be sure to complete above work before
turning on the power, or the unit may
damage.
2. INSTALLATION PROCEDURE
1
2-2. Connecting the DSF-2000
Fixing plate
Movable unit
Temporarily secure the connecting plate
provided to the DBM-120 cabinet.
<< Parts to be used >>
Connecting plate !8 ............................................ 1
Screw (MSKW5 × 10) !9 ................................... 2
2
DBM-120 cabinet
Connecting plate
Screws
Temporarily secure the connecting plate
to the DSF-2000.
<< Parts to be used >>
Screw (MSKW5 × 10) !9 ................................... 2
3
DBM-120 Sheet by Sheet
Check that the distance between the
paper in-feed slot of this unit and the
paper ejection guide of the DSF-2000 is 3
to 7 mm (0.12" to 0.28").
NOTE : As the above range will not be satisfied if
the ground is not flat, check that the
ground is flat.
5
DBM-120 Sheet by Sheet
Guide
3 to 7 mm (0.12" to 0.28")
Paper ejection guide of
DSF-2000
Connecting
plate
DSF-2000
Screws
Tighten the screws temporarily secured in step 2, and secure the connecting plate.
4
5
Check that the paper in-feed slot of this
unit and the center of the paper ejection
guide of the DSF-2000 are of the same
height.
NOTE : As the above range will not be satisfied if
the ground is not flat, check that the
ground is flat.
6
2. INSTALLATION PROCEDURE
DBM-120 Sheet by Sheet
Guide
Paper ejection guide of
DSF-2000
Insert one plug of the connecting cable 1
provided into D-PORT connector 2 of the
DSF-2000, and the other end into
D-PORT connector 1 of this unit.
NOTE : Use the DUPLO connecting cable
(marked STYLE 20276) only.
<< Parts to be used >>
Connecting cable 1 !1 ........................................ 1
7
<DSF-2000>
<DBM-120 Sheet by Sheet>
Connecting
cable 1
D-PORT
connector 2
Connecting
cable 1
D-PORT
connector 1
6
2. INSTALLATION PROCEDURE
q Side-stapled
paper stacker
r Paper holder
w Guide units
t Belt stacker
y Paper guide roller unit
u Saddle-stapled
paper stacker
e Paper holding guide unit
NOTE : When connecting the DBM-120T, refer to its installation manual.
Attach the following q to u parts to this unit.
q Side-stapled paper stacker ................................... 1
w Guide unit ............................................................ 2
e Paper holding guide unit...................................... 1
r Paper holder......................................................... 1
t Belt stacker .......................................................... 1
y Paper guide roller unit ......................................... 1
u Saddle-stapled paper stacker ............................... 1
2-3. Attaching the Accessories
For q, insert the screws attached to this
unit into the holes and tighten.
Place w and e on the side-stapled paper
stacker as shown in the figure.
For r, adjust the Z collars attached to this
unit to the holes and insert.
1
For t, adjust the Z collars to the holes on
this unit and insert, and then insert the
plug of the cable into the connector of this
unit.
For y, adjust the shaft to the hole on this
unit, insert, and rotate it by 90°.
For u, adjust the Z collars attached to the
belt stacker to the holes and insert.
2
7
2. INSTALLATION PROCEDURE
2-5. Connecting the Power Supply
Insert the power plug into the outlet.
1
NOTE : Move the DBM-120 Sheet by Sheet unit to and fro when changing the paper size. Move aside the power cord
so that it does not touch the DBM-120 Sheet by Sheet at this time.
2-4. Connecting the Earth Wire
Connect the earth wires 1 and 2 provided to this unit and the DSF-2000.
1
2-6. Checking the Installation Position
A3
Turn on the power supply of this unit, and set to the A3 size.
Refer to “6-1. Basic Operation” in the instruction manual of this unit for details on setting
the paper size.
1
Indication label of DBM-120
Sheet by Sheet
Notch of paper ejection
guide of DSF-2000
DBM-120 Sheet by Sheet
Earth wire 1
DSF-2000
Earth wire 2
DSF-2000
DBM-120 Sheet by Sheet
Adjust at the long holes of the connecting
plate so that the notch of the paper
ejection guide of the DSF-2000 aligns with
the A3 mark on the indication label of this
unit, and tighten the screws temporarily
secured in step 3 of the section “2-2.” to
secure the connecting plate and
DSF-2000.
2
8
2. INSTALLATION PROCEDURE
2-7. When Connecting the DBM-120T (Checking the Product Number)
Check the product number of the
DBM-120T to be connected. If the product
number is “0009XXXXX” or less, the
DBM-120T will not operate normally.
1
<DBM-120T>
Product number
This ends the installation procedure.
2-8. When Connecting the DBM-120T (Connecting the Connecting Cable)
When connecting the DBM-120T, use the
connecting cable 2 provided.
Insert one plug of the connecting cable 2 into
D-PORT connector 2 of this unit, and the other end
into D-PORT connector 1 of the DBM-120T.
NOTE : Use the DUPLO connecting cable
(marked STYLE 20276) only.
<< Parts to be used >>
Connecting cable 2 !2 ........................................ 1
1
<DBM-120 Sheet by Sheet>
<DBM-120T>
Connecting cable 2
D-PORT
connector 1
Connecting
cable 2
D-PORT
connector 2
Fix the connecting cable 2 to the
DBM-120/120T cabinets using the cable
clamps provided as shown in the figure.
<< Parts to be used >>
Cable clamp !7 ................................................... 3
2
DBM-120 cabinet
Cable clamps
DBM-120T cabinet
11C-99120-00110000M-0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Duplo DBM-120 Installation guide

Duplo
Brand
Duplo
Model
DBM-120
Category
Wall & ceiling mounts accessories
Type
Installation guide

Duplo DBM-120 stapler folder is a versatile and efficient device designed to enhance your document finishing capabilities. With its ability to perform both saddle and side stapling, this machine offers flexible solutions for a wide range of paper sizes and thicknesses.

The DBM-120 excels in handling large volumes of documents, making it ideal for high-productivity environments such as offices, print shops, and educational institutions. Its user-friendly design, including an intuitive control panel and easy-to-adjust settings, ensures smooth operation and minimal downtime.

In addition to its core stapling functions, this machine features an array of accessories that expand its versatility. The paper guide roller unit ensures precise paper alignment, while the belt stacker provides reliable stacking of finished documents. The corner-stapling guide and side jogger enhance the accuracy and efficiency of the stapling process.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents