Riva Roman Blinds Installation Instructions Manual

Brand: Riva

Model: Roman Blinds

Type: Installation Instructions Manual

Riva Roman Blinds are a stylish and practical choice for your home. They're easy to install and can be customized to fit any window. With their versatile design, Riva Roman Blinds can be used in any room of your home, from the living room to the bathroom.

Here are just a few of the features and benefits of Riva Roman Blinds:

Easy to install: Riva Roman Blinds come with all the hardware you need for installation, and they can be installed in just a few minutes.
Customizable: Riva Roman Blinds are available in a variety of colors and fabrics, so you can find the perfect match for your home décor.

Here are just a few of the features and benefits of Riva Roman Blinds:

Easy to install: Riva Roman Blinds come with all the hardware you need for installation, and they can be installed in just a few minutes.
Customizable: Riva Roman Blinds are available in a variety of colors and fabrics, so you can find the perfect match for your home décor.

STEP 1 - CHECK MEASURE

STEP 2 - INSTALLING THE BLIND

STEP 3 - CORD CLEAT

RECESS FIX

FACE FIX

WARNING

Roman Blinds

Installation Instructions

To avoid creating a possible strangulation hazard for children, the corded internal

window covering must be installed in such a way that a loose cord cannot form a

loop 220mm or longer at a height of less than 1600mm above floor level.

A cord guide may be installed lower than 1600mm above the floor level if the

cord is sufficiently secured or tensioned to prevent a loop 220mm or longer from

being formed.

If a cord guide is installed lower than 1600mm above floor level it must be

designed to prevent a child from being able to remove the cord.

If a cleat is used to secure the cord it must be at least 1600mm above floor level

because a child is capable of unwinding a cord from a cleat.

Measure window to ensure correct

size blind has been selected for

installation type (face or recess

mount).

Cord mechanism is located on

either the left or right side of the

blind.

Top Fix Mounting: Pre drill holes on the

head rail 150mm in from each end, then

pre drill holes 500-800mm depending on

the width and the drop of the blind, the

wider the blind the bigger the space.

Measure the distance between A and B

and evenly calculate the hole spacing.

Using the necessary screws, fix the blind

into the recess.

A cord cleat is included with this product & must be

installed to avoid any possible strangulation hazard to

children.

Secure cleat to wall or architrave at least 1600mm above

floor level with screws provided. Wind any excess cod

around cleat to minimise any hazards.

See below instructions.

150mm 150mm500-800mm

A B

Face Fix Mounting: Secure brackets to

wall or architrave using necessary

screws. Ensure brackets are straight &

level & will not interfere with any

mechanisms in the blind head rail.Once

brackets are secured, lift blind evenly &

place into brackets.

For larger size blinds, two person lift may

be required. Screw up through the

bracket onto the head rail.

Cord Stops

Why install cord stops?

There is a potential strangulation hazard stemming

from the “inner” or “left” cords of horizontal window

blinds and shades.

The problem occurs when a corded window blind or

shade is lowered, but not locked into position.

This leaves a small amount of slack in the inner cord.

Infants have reportedly been able to grasp the

slackened inner cord and pull it around their necks.

Once installed correctly cord stops are designed to

reduce the rick of strangulation to children under 5

years.

Cord Stops make it less likely for a child to loosen and

pull in inner cord of a lowered blind, thus avoiding a

potential strangulation threat. Install cord stops to

prevent inner cord access.

How to install cord stops

1. To correctly position

cord stops, lower blind

to the maximum

length it will be used.

Lock cords into

position at head rail.

HEAD RAIL

PULL CORDS

2. Grasp one pull cord

and create a loop just

below head rail. Slide

cord stop onto loop.

Holding the cord stop 3-

6cm below the head

rail, insert end of pull

cord through the loop

to make a knot around

the cord stop.

HEAD RAIL

PULL

CORD

STOP

HEAD RAIL

3-6cm

3. Make sure stop is 3-

6cm below head rail.

Tighten knot by pulling

firmly on the pull cord.

Repeat for each pull

cord.

WARNING

To avoid creating a possible strangulation hazard for children,

the corded internal window covering must be installed in such

a way that a loose cord cannot form a loop 220mm or longer

at a height of less than 1600mm above floor level.

A cord guide may be installed lower than 1600mm above the

floor level if the cord is sufficiently secured or tensioned to

prevent a loop 220mm or longer from being formed.

If a cord guide is installed lower than 1600mm above floor level

it must be designed to prevent a child from being able to

remove the cord.

If a cleat is used to secure the cord it must be at least 1600mm

above floor level because a child is capable of unwinding a

cord from a cleat.

Riva Roman Blinds Installation Instructions Manual

Brand: Riva

Model: Roman Blinds

Type: Installation Instructions Manual

Here are just a few of the features and benefits of Riva Roman Blinds:

Easy to install: Riva Roman Blinds come with all the hardware you need for installation, and they can be installed in just a few minutes.
Customizable: Riva Roman Blinds are available in a variety of colors and fabrics, so you can find the perfect match for your home décor.

Download PDF

report

Riva Roman Blinds Installation Instructions Manual

Riva Roman Blinds Installation Instructions Manual

Other documents