Bauknecht ES 4462 IN-1 Program Chart

Brand: Bauknecht

Model: ES 4462 IN-1

Category: Hobs

Type: Program Chart

This manual is also suitable for

CONTROL BOX

* The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned

to their original positions (see the above diagram next to each knob).

N.B.: The cooling fan runs continuously at two different speeds according to the temperature value of the

components when the appliances are in use. Full speed: for high temperature of the components. Half

speed pulsing: for low temperature of the components. The pulsing speed has to be considered a normal

appliance condition at half speed. The fan may continue to run for the time necessary to ensure sufficient

cooling of the components and adjacent kitchen units after the appliance has been switched off.

PRODUCT DESCRIPTION SHEET

1. Cooktop control knob (front left). Functions: 0 1 ... 10

2. Cooktop control knob (rear left). Functions: 0 1 ... 10

3. Cooktop control knob (rear right). Functions: 0 1 ... 10

4. Cooktop control knob (front right). Functions: 0 1 ... 10

5. Cooktop “ON” indicator light

DIMENSIONS OF CONTROL BOX

Attention: For the correct operation of the control box, please make sure that it is installed in a perfectly

central position under the hob.

ES 4462

Bauknecht is a registered trademark.

The cooktop control knobs are marked with a

numerical scale corresponding to different power

settings, and a series of function symbols.

KEEP WARM FUNCTION

This function uses a low power setting so that food

can be kept warm when cooking is terminated.

How to operate:

1. Turn the knob to .

2. To deactivate the keep warm function, change

the knob position.

DUAL ZONE FUNCTION

(Dependent on cooktop model)

This function is available on the front left and rear

left cooking zones. The dual zone function extends

the heated area of the cooktop so that you can use

large, oval or rectangular pans.

How to operate:

1. Turn the knob to and wait for the residual heat

indicator for the chosen hotplate to start flashing.

2. Select the required power by turning the knob

anti-clockwise. The residual heat indicator remains

lit to show that the cooktop is switched on.

3. To deactivate the function return the knob to "0".

>> INITIAL COOKING PHASE FUNCTION (ICP)

This function speeds up heating of the hotplate for

the preset time during the initial cooking period.

• For glass ceramic cooktops WITH residual heat

indicator light:

1. Turn the knob to

>>.

2. Wait until the residual heat indicator light starts

flashing and then turn the knob anti-clockwise to

the required power setting.

• For electric cooktops WITHOUT residual heat

indicator light:

1. Turn the knob to

>>.

2. Wait for 5 seconds and then turn the knob anti-

clockwise to the required power setting.

E.g. if the setting is "1", the cooking zone will

operate at full power for 1 minute and then

continue at power level “1” until cooking is

terminated or the knob position is changed.

If the setting is "6", the cooking zone will operate

at full power for six minutes and then continue at

power level "6" until cooking is terminated or the

knob position is changed.

This type of operation is applicable to all levels

except level “10”.

FAST BOILING FUNCTION

This function makes it possible to bring water to the

boil fast; the fast boiling function remains active for

a preset time. At time elapsed the cooktop returns

automatically to power level 10. The fast boiling

function can be activated also once you have

already started cooking.

How to operate:

1. Place the pan on the chosen cooking zone.

2. Set the knob to .

GENTLE HEAT FUNCTION

Can be used to prove dough, soften hard butter

from the fridge, keep a baby's bottle or baby food

warm, for yoghurt making, etc..

This function is only available when the relative

cooking zone residual heat indicator light is

switched off.

How to operate:

1. Make sure the residual heat indicator light for the

cooking zone you intend to use is switched off.

2. Turn the knob to .

3. To deactivate the function change the knob

position.

COOKTOP FUNCTIONS

Bauknecht ES 4462 IN-1 Program Chart

Brand: Bauknecht

Model: ES 4462 IN-1

Category: Hobs

Type: Program Chart

This manual is also suitable for

Download PDF

report

Bauknecht ES 4462 IN-1 Program Chart

This manual is also suitable for

Bauknecht ES 4462 IN-1 Program Chart

Related papers

Other documents