Topcom 10002011 User guide

Page is loading ...

UK The features described in this manual are published with

reservation to modifications.

NL De in deze handleiding beschreven mogelijkheden worden

gepubliceerd onder voorbehoud van wijzigingen.

F Les possibilités décrites dans ce manuel sont publiées sous

réserve de modifications.

D Die in dieser Bedienungsanleitung umschriebenen

Möglichkeiten, werden vorbehaltlich Änderungen publiziert.

ES Las características descritas en este manual pueden ser objeto

de futuras modificaciones.

S Funktionerna i denna bruksanvisning publiceras med

reservation för ändringar.

DK Vi forbeholder os retten til ændringer af de specifikationer, der er

beskrevet i denne brugsanvisning.

N Funksjoner beskrevet i denne manualen kan endres uten

nærmere informasjon.

SF Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman

ennakkoilmoitusta.

IT Le caratteristiche descritte nel presente manuale vengono

pubblicate con riserva di modifica.

PT As características descritas neste manual são publicadas sob

reserva de modificação.

CZ Možnost úpravy funkcí popsaných v této píruce vyhrazena.

HU A jelen használati útmutatóban leírt adatokra a gyártó fenntartja

a változtatás jogát.

PL Waciwoci opisane w niniejszej instrukcji obsugi s

publikowane z zatrzeeniem prawa wprowadzenia zmian.

SK Vlastnosti popísané v tejto príruke sú publikované s

vyhradeným právom na zmenu.

3

ENGLISH

TOPCOM Time Master 500

1 SAFETY NOTES

- Read the instructions before using the Chronometer.

- Keep this user's manual for future reference.

- Avoid exposing your Chronometer to extreme conditions for an

unreasonable amounth of time.

- Avoid rough usages or severe impacts to your Chronometer.

- Do not open the Chronometer's case unless by a certified service

agency because it contains precise electronic sensors and compo-

nents.

2 CARE AND MAINTENANCE

- Clean your Chronometer with a soft cloth.

- Keep your Chronometer away from magnets or appliances which

contains magnetic objects such as mobile phones, speakers and

motors.

- Store your Chronometer in a dry place when it is not in use.

3 DISPOSAL OF THE DEVICE (ENVIRONMENT)

At the end of the product lifecycle, you should not throw this

product into the normal household garbage but bring the

product to a collection point for the recycling of electrical and

electronic equipments. The symbol on the product, user guide

and/or box indicate this.

Some of the product materials can be re-used if you bring them to a

recycling point. By re-using some parts or raw materials from used products

you make an important contribution to the protection of the environment.

Please contact your local authorities in case you need more information on

the collection points in your area.

Batteries must be removed before disposing of the device.

Dispose of the batteries in an environmental manner according to

your country regulations.

4

TOPCOM Time Master 500

4 BUTTONS

A. START/STOP BUTTON [st./stp.]

• To 'start' or 'stop' the chronograph

function during chronograph mode.

• To select date in time mode.

• To confirm in setting mode.

B. DISPLAY

C. MODE BUTTON [mode]

• To select among the Time mode

and Chronograph mode.

D. LAP/RESET BUTTON [lap/reset]

• To see the lap time or to reset the

chronograph during chronograph mode.

• To increase the digits under setting display.

• To toggle Yes/No.

5TIME MODE

• Press the [st./stp.] button to select Month, Date and Day of the week.

The day is expressed with numbers on the side of the display 1

to 6 and S (Sunday).

• Press the [lap/reset] button to see the alarm time.

5.1 12/24 HOUR SETTING

During normal time display:

• Press and hold the [lap/reset] button.

• Press the [mode] button once, ‘P’ or ‘A’ will

appear when 12 hour system is set or disap-

pear when 24 hour system is set.

• Release the [lap/reset] button.

A

B

C

D

5

ENGLISH

TOPCOM Time Master 500

5.2 TIME SETTING

In Time mode:

• Press and hold the [mode] button

for more than 3 seconds.

• Release the button and press once

the [mode] button again. The

Tuesday flag (2) and the seconds

will blink on the display.

• Press the [lap/reset] button to

reset the seconds.

• Press the [st./stp.] button to con-

firm. The minutes are flashing.

• Press the [lap/reset] button to

change the minutes.

• Press the [st./stp.] button to confirm.

• Follow previous steps to change hour, months and day.

• Press the [mode] button for final confirmation. The time will be dis-

played.

5.3 MONTH/DATE POSITION INTERCHANGE

In Time mode:

• While pressing and holding the [st./stp.] button, press the [lap/reset]

button to interchange date and month.

5.4 ALARM SETTING

In Time mode:

• Press and hold the [mode] button for more than 3 seconds. The Mon-

day flag (1) and the alarm hour will blink on the display.

• Press the [lap/reset] to change the hour.

• Press the [st./stp.] button to confirm. The minutes are flashing.

• Press the [lap/reset] to change the minutes.

• Press the [mode] button to confirm.

6

TOPCOM Time Master 500

5.4.1 TO ACTIVATE THE ALARM

• Press and hold the [lap/reset] button.

• While holding the [lap/reset] button, press the

[st./stp.] button to switch the Hourly Chime on

‘ ’. Each hour, a tone will be audible.

• While holding the [lap/reset] button, press the

[st./stp.] button again to switch the Alarm on

‘’.

• While holding the [lap/reset] button, press the

[st./stp.] button again to switch the alarm and

once again to switch the Hourly Chime off.

5.4.2 TO TEST THE ALARM

• Press and hold the [lap/reset] button and the [st./stp.] button

together. The alarm will sound.

5.4.3 ALARM SOUND OFF

• When the alarm sounds, press the [lap/reset] button to switch the

alarm off.

6 CHRONOMETER

In Time mode:

1. Press the [mode] button to

switch to Chronometer

mode.

2. Press the [st./stp.] button to

start.

3. Press the [lap/reset] button

while the chronometer is run-

ning.

The lap time is displayed

and the chronometer runs in

the background.

Press the [lap/reset] button again to return to chronometer mode.

4. Press the [st./stp.] button to stop the chronometer.

5. When stopped, press the [lap/reset] button to reset the chronometer.

1

2

3

4

5

7

ENGLISH

TOPCOM Time Master 500

7 BATTERY INSTALLATION

When the display shows weak or irregular symbols, the battery needs to be

replaced.

If you are not confident with electronics, let change the battery by a

professional. Do not open the Chronometer yourself.

Remove all screws on the back cover of the chronometer with a small

screwdriver.

Remove and re-install a 3V (CR2032) battery with the positive (+) pole

facing up and replace the cover.

8 CE MARK

This product is in compliance with the essential requirements and other

relevant provisions of the directive 89/336/EEC. This is confirmed by the

CE-mark. The Declaration of conformity can be found on:

http://www.topcom.net/cedeclarations.php

Do not short-circuit batteries & dispose of in fire.

8

TOPCOM Time Master 500

9 TOPCOM WARRANTY

9.1 WARRANTY PERIOD

The Topcom units have a 24-month warranty period. The warranty period

starts on the day the new unit is purchased. Consumables or defects

causing a negligible effect on operation or value of the equipment are not

covered.

The warranty has to be proven by presentation of the original purchase

receipt, on which the date of purchase and the unit-model are indicated.

9.2 WARRANTY HANDLING

A faulty unit needs to be returned to a Topcom service centre including a

valid purchase note.

If the unit develops a fault during the warranty period, Topcom or its officially

appointed service centre will repair any defects caused by material or

manufacturing faults free of charge.

Topcom will at its discretion fulfill its warranty obligations by either repairing

or exchanging the faulty units or parts of the faulty units. In case of

replacement, colour and model can be different from the original purchased

unit.

The initial purchase date shall determine the start of the warranty period.

The warranty period is not extended if the unit is exchanged or repaired by

Topcom or its appointed service centres.

9.3 WARRANTY EXCLUSIONS

Damage or defects caused by incorrect treatment or operation and damage

resulting from use of non-original parts or accessories not recommended by

Topcom are not covered by the warranty.

The warranty does not cover damage caused by outside factors, such as

lightning, water and fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been

changed, removed or rendered illegible.

Page is loading ...

R00001

SERVICE RETURN CARD - RÜCKSENDEKARTE -

CARTE DE RETOUR SERVICE - RETOURFICHE

RETURN WITH YOUR DEFECT PRODUCT

Name/Vorname/Prénom/Naam:

Surname/Familienname/Nom/Familienaam:

Street/Straße/Rue/Straat:

Country/Land/Pays/Land:

Tel./Tél.:

E-mail:

Model name/Modellbezeichnung/Nom du modèle/Modelnaam:

Serial Nr/Seriennummer/N° série/Serienummer:

Purchase date/Kaufdatum/Date d’achat/Aankoopdatum:

(DD/MM/YYYY) - (TT/MM/JJJJ)

Fault description/Beschreibung des Defekts/Description de la panne/Beschrijving defect:

(Original Proof of Purchase has to be attached to this return card to be valid for warranty)

Model name/Modellbezeichnung/Nom du modèle/Modelnaam:

Serial Nr/Seriennummer/N° série/Serienummer:

Purchase date/Kaufdatum/Date d’achat/Aankoopdatum:

(DD/MM/YYYY) - (TT/MM/JJJJ)

Fault description/Beschreibung des Defekts/Description de la panne/Beschrijving defect:

Nr./N°: Box/Postfach/Boîte/Postbus:

Location/Ort./Lieu/Plaats: Post code/Postleitzahl/Code Postal/Postcode:

TIME MASTER 500

visit our website

www.topcom.net

MD9700148

Topcom 10002011 User guide

Related papers

Other documents