Invacare 1048086 is a cam housing for a quad cane. It is part of a replacement kit that includes a cam lever and is used to assemble a new camlock or to replace a damaged one on an existing quad cane. The camlock is a crucial component of the quad cane as it securely locks the upper cane handle onto the base, ensuring stability and preventing the cane from collapsing.
To install the camlock, the cam housing must first be soaked in warm water for about 10 minutes to soften it for easier installation. Then, the cam lever is inserted into the cam housing through a cutout, and the cam lever is rotated 90 degrees until it is securely in place. The camlock assembly is then slid onto the bottom of the upper cane handle, ensuring that the small tab on the top of the camlock housing snaps into the small notch on the bottom of the cane handle.
Invacare 1048086 is a cam housing for a quad cane. It is part of a replacement kit that includes a cam lever and is used to assemble a new camlock or to replace a damaged one on an existing quad cane. The camlock is a crucial component of the quad cane as it securely locks the upper cane handle onto the base, ensuring stability and preventing the cane from collapsing.
To install the camlock, the cam housing must first be soaked in warm water for about 10 minutes to soften it for easier installation. Then, the cam lever is inserted into the cam housing through a cutout, and the cam lever is rotated 90 degrees until it is securely in place. The camlock assembly is then slid onto the bottom of the upper cane handle, ensuring that the small tab on the top of the camlock housing snaps into the small notch on the bottom of the cane handle.
Invacare 1048086 is a cam housing for a quad cane. It is part of a replacement kit that includes a cam lever and is used to assemble a new camlock or to replace a damaged one on an existing quad cane. The camlock is a crucial component of the quad cane as it securely locks the upper cane handle onto the base, ensuring stability and preventing the cane from collapsing.
To install the camlock, the cam housing must first be soaked in warm water for about 10 minutes to soften it for easier installation. Then, the cam lever is inserted into the cam housing through a cutout, and the cam lever is rotated 90 degrees until it is securely in place. The camlock assembly is then slid onto the bottom of the upper cane handle, ensuring that the small tab on the top of the camlock housing snaps into the small notch on the bottom of the cane handle.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI