Rosemount G1 Welding Mandrel Quick start guide
- Type
- Quick start guide
Quick Start Guide
00825-0100-4106, Rev 02
August 2020
Rosemount
™
G1 Welding Mandrel
1 About this guide
This guide provides instructions for mounting the welding mandrel
(part number FB-6041).
1.1 Safety instructions
Follow these guidelines to ensure safe use and extend the life of the
product.
CAUTION
• Read this document before using the product and keep it during
the entire service life.
• The product must be suitable for the corresponding applications
and environmental conditions without any restrictions.
• Only use the product for its intended purpose.
• If the operating instructions or the technical data are not adhered
to, personal injury and/or damage to property might occur.
• The manufacturer assumes no liability or warranty for any
consequences caused by tampering with the product or incorrect
use by the operator.
• Installation, electrical connection, set-up, operation and
maintenance of the product must be carried out by qualified
personnel.
2
2 Mount the welding mandrel
The welding mandrel absorbs heat and can prevent warping during
installation of the weld-in adapter.
Prerequisites
CAUTION
While welding, the weld-in adapter and mandrel can get extremely
hot. To prevent burns, allow the components to cool before
disassembling the weld-in adapter and mandrel assembly.
Procedure
1. Hand-tighten the weld-in adapter.
2. Insert the bolt through mandrel opening.
3
3. Mount the counter plate.
4. Tighten the nut.
16 mm
Postrequisites
1. Weld the weld-in adapter according to instructions found in
the Rosemount
™
Hygienic Process Connection Adapter Quick
Start Guide for Weld-in adapter.
2. Allow the weld and mandrel components to cool, then remove
the mandrel components from the weld-in adapter.
4
5
6
7
*00825-0100-4106*
Quick Start Guide
00825-0100-4106, Rev. 02
August 2020
Emerson Automation Solutions
6021 Innovation Blvd.
Shakopee, MN 55379, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
North America Regional Office
Emerson Automation Solutions
8200 Market Blvd.
Chanhassen, MN 55317, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
Linkedin.com/company/Emerson-Automation-Solutions
Twitter.com/Rosemount_News
Facebook.com/Rosemount
Youtube.com/user/RosemountMeasurement
©
2020 Emerson. All rights reserved.
Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a
trademark and service mark of Emerson Electric Co. Rosemount is a mark of one of the
Emerson family of companies. All other marks are the property of their respective owners.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Rosemount G1 Welding Mandrel Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Rosemount Hygienic Process Connection Adapters (FB-1041) Quick start guide
-
-
-
-
-
-
-
-
-