Rev-A-Shelf 6065-16-15-52 Installation guide

1. Mark center line of cabinet.

2. Place template on center line of cabinet

and butt edge of template against back of cabinet.

(arrow pointing towards back).

3. Mark and drill mounting holes,

using 1/8 diameter drill or equivalent.

4. Repeat for upper mounting bracket.

CUT HERE FOR 18”, 20”

CUT HERE FOR 16”

CABINET CENTER LINE

CABINET

TEMPLATE

1” HOLE THROUGH

BOTTOM CABINET FLOOR

ONLY FOR JACK SCREW ASSEMBLY

DRILL ONLY FOR INSTALLING

UPPER PANTRY TOP PIVOT

Note: Locations given provides proper clearance from back of cabinet.

2409 Plantside Dr.

(800) 626-1126

www.rev-a-shelf.com

T-6260-TRI-0614

Cut template

according to tray size

2018

CUT HERE FOR 22”

Page is loading ...

Download PDF