Moen TS42112-9700-L Dimensions Guide
- Category
- Sanitary ware
- Type
- Dimensions Guide
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia. holes
8" on center
• 1/2" copper connections
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Water usage is limited to these maximum flow rates as indicated
by the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and stainless
steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
WEYMOUTH™
Two-Handle Wall Mount Faucet
3"
(76mm)
2-1/2 "
(64mm)
8” (203mm) MIN.
2" Dia.
(51mm)
4"
(101mm)
8-3/8"
(213mm)
7.84"
(199mm)
MAX WALL THICKNESS
1-3/4” (45mm)
1-1/2
(38mm)"
3” (76mm) MIN.
Model: TS42106 series (Lever Handle)
TS42112 series (Cross Handle)
Valve: 9700
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 1/16
DESCRIPTION
• Metal construction
• 1/2" copper connections
• Designed to be installed through 3 holes, 1-3/8” dia., 8" on center
• Built in 1-1/2" of adjustability
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side handle counterclockwise to open and
clockwise to close
• Rotate cold side handle clockwise to open and counter-
clockwise to close
CARTRIDGE
• 1224 cartridge design with nonmetallic/nonferrous and stainless
steel materials
STANDARDS
When trim kit is added to M-Pact valve, the product is:
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
M-Pact™
Two-Handle Wall Mount Valve & Bracket
Model: 9700
8"
(204mm)
Valve requires
1-3/8" (35mm) holes
1-3/4" (45mm)
max finished wall
3-1/8"
(79mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
5/12
M•pact™ System
-
1
-
2
Moen TS42112-9700-L Dimensions Guide
- Category
- Sanitary ware
- Type
- Dimensions Guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI