Moen TS6730-9700-L Dimensions Guide

Moen
Brand
Moen
Model
TS6730-9700-L
Category
Sanitary ware
Type
Dimensions Guide

Moen TS6730-9700-L is a wall-mounted two-handle faucet, designed for a long-lasting performance due to its metal construction with various finishes and lifetime limited warranty against leaks, drips and finish defects to the original customer. It is easy to use, as the maximum handle rotation angle is 90 degrees to full on for either handle, with hot side rotating counterclockwise to open and clockwise to close, while the cold side rotates clockwise to open and counterclockwise to close. The water usage is limited to a maximum flow rate of 1.2 gpm (4.

Moen TS6730-9700-L is a wall-mounted two-handle faucet, designed for a long-lasting performance due to its metal construction with various finishes and lifetime limited warranty against leaks, drips and finish defects to the original customer. It is easy to use, as the maximum handle rotation angle is 90 degrees to full on for either handle, with hot side rotating counterclockwise to open and clockwise to close, while the cold side rotates clockwise to open and counterclockwise to close. The water usage is limited to a maximum flow rate of 1.2 gpm (4.

DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia. holes
8" on center
• 1/2" copper connections
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Water usage is limited to these maximum flow rates as indicated by the
corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
90 DEGREE™
Two-Handle Wall Mount Faucet
Model: TS6730 series
Valve: 9400
3-1/8"
(79mm)
MAX WALL THICKNESS
1-3/4” (45mm)
3” (76mm) MIN.
8" (203mm) MIN.
2"
(51mm)
Square
6-7/8"
(175mm)
6.33"
(161mm)
2-5/8"
(67mm)
2" Square
(51mm)
Handle Escutcheon
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 1/16
DESCRIPTION
• Metal construction
• 1/2" copper connections
• Designed to be installed through 3 holes, 1-3/8” dia., 8" on center
• Built in 1-1/2" of adjustability
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side handle counterclockwise to open and
clockwise to close
• Rotate cold side handle clockwise to open and counter-
clockwise to close
CARTRIDGE
• 1224 cartridge design with nonmetallic/nonferrous and stainless
steel materials
STANDARDS
When trim kit is added to M-Pact valve, the product is:
• Third party certified to meet ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
M-Pact™
Two-Handle Wall Mount Valve & Bracket
Model: 9700
8"
(204mm)
Valve requires
1-3/8" (35mm) holes
1-3/4" (45mm)
max finished wall
3-1/8"
(79mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
1 9 4 3 06 05 6 03 2 0B 6 8 7 A
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
5/12
M•pact™ System
  • Page 1 1
  • Page 2 2

Moen TS6730-9700-L Dimensions Guide

Moen
Brand
Moen
Model
TS6730-9700-L
Category
Sanitary ware
Type
Dimensions Guide

Moen TS6730-9700-L is a wall-mounted two-handle faucet, designed for a long-lasting performance due to its metal construction with various finishes and lifetime limited warranty against leaks, drips and finish defects to the original customer. It is easy to use, as the maximum handle rotation angle is 90 degrees to full on for either handle, with hot side rotating counterclockwise to open and clockwise to close, while the cold side rotates clockwise to open and counterclockwise to close. The water usage is limited to a maximum flow rate of 1.2 gpm (4.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers