Moen T6110 Series User manual

Category
Sanitary ware
Type
User manual

This manual is also suitable for

FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
1/2" IPS connections
OPERATION
Lever style handles
Maximum handle rotation angle is 90˚ to full on for either handle
Hot side counterclockwise to open (clockwise to close)
Cold side clockwise to open (counterclockwise to close)
Includes hot and cold temperature indicators
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
1224 cartridge design
Nonmetallic, nonferrous and stainless steel material
STANDARDS
Third party certified to ASME A112.18.1/CSA B125.1, ICC A117.1
and all applicable requirements referenced therein
Certified to ANSI/NSF 61/9
Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
•ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
LEVEL™
Two Handle Widespread
Lavatory Faucet Trim
Models: T6110 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
Lift
Rod
1-11/32"
(34mm)
QUICK CONNECT
HOSE ASSEMBLY
2-1/4” (57mm) MAX.
DECK THICKNESS
ÿÿ
5151
(78.3mm)
(48mm)
(8.5mm)
1-15/16”
(49mm)
8”
(204mm)
(69mm)
(40mm)
(51mm)
(177mm)
58?58?
236236
ÿÿ
.5
2
4
2
5
.4
(25.4mm)
(90mm)
58˚
(236mm)
3-5/8”
(92mm)
1-1/2"
2-11/16"
3-1/16"
1-7/8"
3-1/2"
9-3/16"
1"
5/16"
6-15/16"
2"
Specifications
FOR MORE INFORMATION CALL: 1-800-465-6130
www.moen.com
Rev. 3/09
  • Page 1 1

Moen T6110 Series User manual

Category
Sanitary ware
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI