Logging In the Machine...................................................................................................................................42
When the Authentication Screen is Displayed.......................................................................................... 42
User Code Authentication Using the Control Panel.................................................................................. 42
Logging In Using the Control Panel............................................................................................................42
Logging Out Using the Control Panel.........................................................................................................43
Placing Originals..............................................................................................................................................44
Output Locations for Originals....................................................................................................................44
Copy Output Locations................................................................................................................................46
Adjusting the rear output............................................................................................................................. 47
Placing Originals on the Original Table.................................................................................................... 47
Setting the Carrier Sheet............................................................................................................................. 49
Setting the Original Hangers...................................................................................................................... 50
3. Copy
Original and Copy Output Locations.............................................................................................................53
Original Output Locations...........................................................................................................................53
Copy Output Locations................................................................................................................................54
Basic Procedure................................................................................................................................................56
Reducing or Enlarging Originals.....................................................................................................................57
Preset Reduce / Enlarge............................................................................................................................. 57
Zoom.............................................................................................................................................................58
Auto Reduce / Enlarge............................................................................................................................... 59
User Auto Reduce / Enlarge...................................................................................................................... 60
Combined Copying......................................................................................................................................... 63
Specifying the Length of Copy Paper Cut...................................................................................................... 65
Synchro Cut..................................................................................................................................................65
Preset Cut......................................................................................................................................................65
Variable Cut................................................................................................................................................. 67
Copying from the Bypass Tray........................................................................................................................69
Copying onto Regular Size Paper from the Bypass Tray......................................................................... 69
Copying onto Custom Size Paper from the Bypass Tray..........................................................................70
Sort.................................................................................................................................................................... 72
Changing the Number of Sets.................................................................................................................... 73
Storing Data in the Document Server............................................................................................................. 75
2