LADDER RACK
INSTRUCTIONS
1. Choose a safe, convenient loca-
tion for ladder storage. Position
the Ladder Rack at the comfort-
able height, centering mounting
holes on studs with 16" centers.
2. Tighten screw through one of the
top corners of the Ladder Rack
into the center of the first stud.
3. Rotate the Ladder Rack and make
sure it is level, mark and insert the
second screw.
4. Fasten the Ladder Rack to the wall
with the remaining two screws.
NOTICE:
Little Giant Ladder Systems shall not
be responsible for any Ladder Rack
failure due to improper installation or
wall failure. If Ladder Rack cannot be
installed as per instructions, see that
installation conforms to local building
codes.
SUPPORTS 75 lbs
16”
1
2
3
4
©2012 Little Giant Ladder Systems 51930 v2 9.12
/
