Playing a disc
1
2
3
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source.
Press PROGRAM (ANGLE/PROG on the remote) for more than two seconds to
program all available stations in order of waveband.
Press ALBUM/PRESET3/4 until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
PDCC-JS/JW-0543
2005 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
OPEN CLOSE
•
CLOCK SET
BAND
STANDBY
-
ON
ECO POWER
RECORD
DISPLAY
MCD510 MICRO
iR
THEATHRE
Press OPEN •CLOSEçto open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ (PLAY/PAUSEÉÅ
on the remote).
To stop playback, press 9 (STOP 9 on the remote).
MCD510 QUG_Eng 2005.10.28, 9:264