Schneider Electric Full Flat 500W Dimmer Module Instruction Sheet

Brand: Schneider Electric

Model: Full Flat 500W Dimmer Module

Type: Instruction Sheet

(1) (2) (3)

(4) (5)

Live

Neutral

Red wire

Black wire

Load

Dimmer

Switch

a. b.

A replaceable fuse is inside the module for safety usage. To replace the

fuse, please follow the following diagram.

Fuse

Step 1

F3.15AH250VP

Step 2

Fuse Holder

F3.15AH250VP

CCoovveerr

Step 3

F3.15AH250VP

LOAD

IN8404D

220-240V~

500W

IEC60669

LINE

(1) (2)

„

en Full Flat 500W Dimmer Module

About this product

Dimmer switches used to raise or lower the

brightness in electric light bulbs. They are often used

in homes and businesses to conserve energy and to

control the lighting environment.

! Mounting the module

(1) Mount the wall box to the wall.

(2) Snap the module to the grid plate.

(3) Connect the wires to the module.

(4) Place the grid plate on the wall box and secure it

using the screws on both sides.

(5) Assemble the cover frame on the module,

ensuring proper engagement by hearing a clear

“click.”

“ Wiring diagram

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION,

OR ARC FLASH

Safe electrical installation must be carried out only

by skilled professionals. Skilled professionals must

prove profound knowledge in the following areas:

• Connecting to installation networks.

• Connecting several electrical devices.

• Laying electric cables.

• Safety standards, local wiring rules and

regulations.

Failure to follow these instructions will result in

death or serious injury.

Make wiring connections and the fuse replacement as

per diagram:

a. Wiring Diagram: L-Live, N-Neutral

b. Fuse Replacement Diagram

§ Unmounting the module

(1) Insert a screwdriver between the cover frame

and the wall surface to remove the cover frame.

Then twist the screwdriver to disassemble the

cover frame from the module.

(2) Use the other hand to support and remove the

cover frame.

Care

1. Use a soft damp cloth/tissue to remove dust or dirt.

cleaning.

3. Do not use caustic cleaning agents.

Technical data

Voltage 220 - 240 V

Maximum Power Rating 500W Incandescent lamp

Dimensions

1 module size - 52.4 (L) x 23.6 (W) mm

Frequency 50Hz

Schneider Electric Industries SAS

If you have technical questions, please contact the

Customer Care Centre.

Customer Care: 1800 103 0011

Email: [email protected]

Mktd. by: Schneider Electric India Pvt. Ltd.,

C56, Mayapuri Industrial Area, Phase II,

New Delhi - 110064, India.

Mfg. by: Schneider Electric India Pvt. Ltd.,

A9/10, MIDC, Nimblak Road, Nagapur,

Ahmednagar 414111, Maharashtra, India

IN8404D_xx Full Flat 500W Dimmer Module

IS1907101-00 07/23

Schneider Electric Full Flat 500W Dimmer Module Instruction Sheet

Schneider Electric Full Flat 500W Dimmer Module Instruction Sheet

Schneider Electric Full Flat 500W Dimmer Module Instruction Sheet

Related papers

Other documents