2. JasonL
  3. BQDW1212.B.SO

JasonL BQDW1212.B.SO Operating instructions

  • Hello! I've reviewed the assembly instructions for the Quadro Wood A 1200 mm Boardroom table. This document includes a step-by-step guide, tools requirements, and other details needed for proper assembly. I'm ready to answer any questions you might have about this product.
  • What tools are required for installation?
    How many people are needed for installation?
    What is the size of the table?
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
Page 1 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Tools Required: Power screwdriver; Allen key set (provided)
2 persons required for installation
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
Table top x1
Leg Quadro A x2
Beam x2
Plastic bracket x8
A
B
C
D
Allen key x2I
M8x20MM CSK x4
M8x20MM Socket head x4
M6x20MM Socket head x8
M6x30MM Socket head x8
E
F
G
H
COMPONENTS
SCREWS
Page 2 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
C
D
E F G H
A
B
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 3 of 7
Insert the bottom of the legs as shown in the
illustration. Using Allen Key provided, attach
Socket head screw socket for all legs.
You will notice two colored
stickers located on each leg.
Both legs must have the colour
sticker facing away from where
the plastic brackets are inserted.
Plastic bracket holes
facing to the other side.
STEP 01 STEP 02
F
G
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
STEP 03
Using Allen Key provided, attach 4 plastic brackets per leg (D)
(as per picture above) using M6x20MM (G) Socket head screw.
Using Allen Key provided, attach M8x20MM Socket head (F)-
screw socket half way into leg for both legs (B).
STEP 04
Page 4 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
STEP 05
Adjust extendable beam (C) to desired
length using markers and secure beam
at that length using screws provided
Page 5 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
50
1200
1300
1400
1500
1600
1700
1800
1900
2000
50
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
STEP 06
TOP VIEW
Attach beam (C) to legs (B) using nut insert in legs.
See point attached
Frame looks like this. Using Allen Key, attach beam (C) with Socket (E)
STEP 07
Page 6 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
E
E
E
E
ASSEMBLY INSTRUCTIONS
Quadro Wood A
Boardroom table
Size: 1200 mm
STEP 08
Page 7 of 7
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Place desktop ontop of frame. Nut inserts in top will align with plastic
joiner brackets using M6x30MM (H) sockets attached tops to frame.
TABLE TOP
BOTTOM VIEW
H
/