SOYO SY-KT600 User manual

Type
User manual
SY-KT600 DRAGON Ultra
Motherboard
****************************************************
AMD Athlon & Duron Processors Supported
VIA KT600 AGP/PCI Motherboard
100/133/166/200 MHz Front Side Bus supported
ATX Form Factor
****************************************************
User's Manual
SOYO SY-KT600 DRAGON Ultra
ii
Copyright © 2003 by SOYO Computer Inc.
Trademarks:
SOYO is a registered trademark of SOYO Computer Inc. All trademarks are
properties of their owners.
Product Rights:
All names of the product and corporate mentioned in this publication are used for
identification purposes only. The registered trademarks and copyrights belong to
their respective companies.
Copyright Notice:
All rights reserved. This manual has been copyrighted by SOYO Computer Inc. No
part of this manual may be reproduced, transmitted, transcribed, translated into any
other language, or stored in a retrieval system, in any form or by any means, such as
by electronic, mechanical, magnetic, optical, chemical, manual or otherwise,
without permission in writing from SOYO Computer Inc.
Disclaimer:
SOYO Computer Inc. makes no representations or warranties regarding the contents
of this manual. We reserve the right to amend the manual or revise the specifications
of the product described in it from time to time without obligation to notify any
person of such revision or amend. The information contained in this manual is
provided to our customers for general use. Customers should be aware that the
personal computer field is subject to many patents. All of our customers should
ensure that their use of our products does not infringe upon any patents. It is the
policy of SOYO Computer Inc. to respect the valid patent rights of third parties and
not to infringe upon or to cause others to infringe upon such rights.
Disclaimer:
Please be advised that some SOYO motherboards are designed with overclocking
features and may allow users to run the components beyond manufacturer's
recommended specifications. Overclocking beyond manufacturer's specifications is
not recommended nor endorsed by SOYO, Inc. and will void your manufacturer's
warranty. Overclocking beyond manufacturer's specifications is not encouraged and
should be assumed at the user's own risk. Unsafe overclocking can damage the user's
system or cause serious personal injury. If the user is unsure or in doubt about
overclocking, please seek professional advise. SOYO, Inc. is not responsible for any
direct or indirect damage resulting from overclocking.
Restricted Rights Legend:
Use, duplication, or disclosure by the Government is subject to restrictions set forth
in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at 252.277-7013.
About This Guide:
This Quick Start Guide can help system manufacturers and end users in setting up
and installing the Motherboard. Information in this guide has been carefully checked
for reliability; however, to the correctness of the contents there is no guarantee given.
The information in this document is subject to amend without notice.
For further information, please visit our Web Site on the Internet. The address is
"http://www.soyo.com.tw".
Edition: July 2003
Version P1.0
KT600 DRAGON Ultra SERIES
FC
CTested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
RECYCLED PAPER
100%
Table of Contents SY-KT600 DRAGON Ultra
iii
Table of Contents
CHAPTER 1 MOTHERBOARD DESCRIPTION...............................5
1-1 INTRODUCTION...............................................................5
1-2 UNPACKING THE MOTHERBOARD .............................5
1-3 KEY FEATURES................................................................7
1-4 HANDLING THE MOTHERBOARD ...............................9
1-5 ELECTROSTATIC DISCHARGE PRECAUTIONS..........9
1-6 SY-KT600 DRAGON ULTRA MOTHERBOARD LAYOUT ......10
CHAPTER 2 HARDWARE INSTALLATION ...................................18
2-1 PREPARATIONS..............................................................18
2-2 INSTALLATION GUIDE .................................................19
2-3 QUICK BIOS SETUP.......................................................48
CHAPTER 3 BIOS SETUP UTILITY.................................................50
3-1 SOYO COMBO SETUP ...................................................53
3-2 STANDARD CMOS SETUP............................................60
3-3 ADVANCED BIOS FEATURES ......................................64
3-4 ADVANCED CHIPSET FEATURES ...............................69
3-5 INTEGRATED PERIPHERALS.......................................74
3-6 POWER MANAGEMENT SETUP ..................................80
3-7 PNP/PCI CONFIGURATIONS.........................................86
3-8 PC HEALTH STATUS ......................................................89
3-9 LOAD FAIL-SAFE DEFAULTS ......................................91
3-10 LOAD OPTIMIZED DEFAULTS.....................................92
3-11 SET SUPERVISOR PASSWORD ....................................93
3-12 SET USER PASSWORD ..................................................94
CHAPTER 4 DRIVERS INSTALLATION .........................................96
CHAPTER 5 VIA USB 2.0 Driver installation..................................103
CHAPTER 6 BROADCOM ONBOARD LAN DRIVER INSTALLATION.104
CHAPTER 7 SILICON IMAGE SERIAL ATA DRIVER INSTALLATION .....106
Table of Contents SY-KT600 DRAGON Ultra
iv
CHAPTER 8 VIA 8237 SERIAL ATA DRIVER INSTALLATION..... 112
APPENDIX A SILICON IMAGE 3112 ............................................... 115
APPENDIX B TROUBLESHOOTING AT FIRST START .............. 118
APPENDIX C CONTACT INFORMATION ......................................125
Hardware Installation SY-KT600 DRAGON Ultra
5
Chapter 1
MOTHERBOARD DESCRIPTION
1-1 INTRODUCTION
The SY-KT600 DRAGON Ultra AGP/PCI motherboard is a high
performance Socket A, ATX form-factor system board. The SY-KT600
DRAGON Ultra uses VIA Chipset technology and supports AMD Socket
class processors. This motherboard is fully compatible with industry
standards and adds many technical enhancements.
1-2 UNPACKING THE MOTHERBOARD
When unpacking the motherboard, check for the following items:
The SY-KT600 DRAGON Ultra AGP/PCI motherboard
The user manual
The Installation CD-ROM
SOYO Bonus Pack CD-ROM
One IDE Device ATA 66/100/133 Flat Cable
One Floppy Disk Drive Flat Cable
Two Serial ATA cables
Hardware Installation SY-KT600 DRAGON Ultra
6
One SPDIF Audio Connector Card (optional)
One Back panel
One plastic bag with Heat Sink Compound
ΣBOX (optional)
Warning: Do not unpack the motherboard from its anti-static
packaging until you are ready to install it.
Like most electronic equipment, your motherboard may be damaged by
electrostatic discharge. To avoid permanent damage to components ground
yourself while working by using a grounding strap. Otherwise, ground
yourself frequently by touching the unpainted portion of the computer
chassis to drain the static charges.
Handle the motherboard carefully, holding it by the edges.
You are now ready to start the installation.
Hardware Installation SY-KT600 DRAGON Ultra
7
1-3 KEY FEATURES
CPU Supports AMD 462 pins Socket A processors:
Athlon XP (Palomino/Thoroughbred/Barton)
(200/266/333/400 MHz FSB)
Duron/Morgan
SOYO COMBO Setup CMOS setup menu for
complete and easy changing of your CPU settings
in CMOS setup, making jumpers obsolete.
Chipset AMD® KT600/ 8237 Chipset
Memory Supports PC2100, PC2700 and PC3200 DDR
(non-registered and non-ECC) memory modules.
SOYO COMBO Setup menu, to fully configure
your memory settings.
AGP 1x AGP master 4x/8x slot (1.5v only)
PCI 5x 32-bit bus master PCI slots
I/O ITE IT8705F Super I/O controller supporting:
Floppy disk controller
Parallel port (SPP, EPP and ECP compliant)
2x 16550A compatible RS232 serial ports
IrDA compatible infrared port
PS/2 Keyboard and mouse
1x game port pin header
Hardware monitor for monitoring temperatures,
voltages and fan speeds in the system.
Storage 8237 Integrated Parallel ATA controller
supporting up to 4x UDMA 33/66/100/133
Parallel ATA devices.
8237 Integrated Serial ATA controller supporting
up to 2x UDMA 150 hard disks in normal or
RAID 0,1 mode
Silicon Image Sil3112 Serial ATA RAID
controller supporting up to 2x UDMA 150 hard
disks in normal or RAID (0 or 1) mode.
Hardware Installation SY-KT600 DRAGON Ultra
8
USB 2.0 8x USB 2.0 compliant ports (4x on rear IO panel, 4x
motherboard connectors.
IEEE 1394 Onboard VIA VT6306 IEEE1394 Firewire controller
with 1x rear I/O panel connector, 2x pin header
Sound Onboard CMedia CM8738 6 channel PCI Hardware
Audio
Network 10/100 MBps 100Base-T and 1000BASE-T (Gigabit)
Ethernet controller, supporting Wake-On-Lan (WOL)
BIOS Power Failure resume function to allow the system
to turn on or off after a power failure, which is
indispensable for server systems.
Wake On Ring and Power On by Alarm to allow
your system to wake up from suspend or power on
through the modem or RTC alarm.
Multiple boot, allowing your system to boot from
for example CD-ROM
Hardware Installation SY-KT600 DRAGON Ultra
9
1-4 HANDLING THE MOTHERBOARD
To avoid damage to your motherboard, please follow these simple rules
while unpacking:
Before handling the motherboard, ground yourself by grasping an
unpainted portion of the system's metal chassis.
Remove the motherboard from its anti-static packaging. Hold the
motherboard by the edges and avoid touching its components.
Check the motherboard for damage. If any chip appears loose, press
carefully to set it firmly in its socket.
Warning: Do not apply power if the motherboard appears
damaged. If there is damage to the board, contact your dealer
immediately.
1-5 ELECTROSTATIC DISCHARGE PRECAUTIONS
Be sure to ground yourself before handling the motherboard or other system
components. Electrostatic discharge can easily damage the components.
Note that you must take special precautions when handling the motherboard
in dry or air-conditioned environment.
To protect your equipment from electrostatic discharge, take the following
precautions:
Do not remove the anti-static packaging until you are ready to install.
Ground yourself before removing any system component from its
protective anti-static packaging. (To ground yourself, grasp the expansion
slot covers or other unpainted portions of the computer chassis).
Frequently ground yourself while working or use a grounding strap.
Handle the motherboard by its edges and avoid touching its
components.
Hardware Installation SY-KT600 DRAGON Ultra
10
1-6 SY-KT600 DRAGON Ultra MOTHERBOARD LAYOUT
Back Panel SY-KT600 DRAGON Ultra Platform
ATX Pow er
AGP PRO
3V
Lithium
Battery
CD_SPDIF
1
2
PCI Slot #5
PCI Slot #1
PCI Slot #4
PCI Slot #3
PCI Slot #2
FDC1
IDE 1 IDE 2
Super
I/O
Silicon Image
Sil3112
H/W
Audio
V
T6306
11
44
V
T8237
J30
15
13
JP5
1
2
ABR
FW2
610
FW1
610
SATA1
RAID_LED1
SATA2 SATA3
SATA4
PS/2 KB
Connector PS/2 Mouse
Connector
PRT
COM A
COM B
Audio out
Audio in
MIC IN
USBLAN
1394USB
LAN Connector
RJ1
Hardware Installation SY-KT600 DRAGON Ultra
11
1-7 SY-KT600 DRAGON ULTRA MOTHERBOARD
COMPONENTS
EF G
H
I
J
K
L
M
N
O
P
Q
R
STUVWX
Y
ZAAAK
AB
AC
AD
AE
AG
AF
AH
AI
AJ
AB C D
Hardware Installation SY-KT600 DRAGON Ultra
12
A ATX Power Connector
This connector is to attach your power supply to. For more details,
please check page 40, Paragraph F. ATX Power Supply.
B Chassis Cooling Fan (CHAFAN2) connector
This connector is to connect your chassis fan to your motherboard.
This motherboard supports up to 3 chassis fans. Please check the
(2) Chassis Cooling Fan (CHAFAN1, CHAFAN2, CHAFAN3)
paragraph on page 37 for more details.
C Socket 462 (Socket A) connector
This is the Zif (Zero Insertion Force) socket for your AMD
Athlon®, Athlon XP®, Duron® or Morgan® CPU. For more
information on how to install your CPU, check the CPU Mount
Procedure paragraph on page 16.
D VIA Apollo KT600 North Bridge
The advanced FastStream64 DDR400 Memory Controller on the
VIA Apollo KT600 interweaves with the 400MHz Front Side Bus
to provide a perfectly balanced subsystem, greatly reducing data
latency and enabling searing performance from the latest AMD
Athlon™ XP processors. In addition, the KT600 supports the very
latest I/O technologies including AGP8X, deriving maximum
performance from the most powerful graphics processors. VIA
Vinyl Six-TRAC Audio completes the multimedia entertainment
experience, delivering rich, warm six-channel surround sound
when listening to music, watching movies, or playing the latest
games.
E 3x DDR DIMM Slots
These 184 pin memory slot is to install your system memory in. It
supports up to 1GB of memory per slot. For more details on how to
install memory, check the Step 2: Install Memory Module
paragraph on page 25.
F ABR (Anti Burn Regulator) Jumper
SOYO's ABR (Anti Burn Regulator) is specially designed
hardware circuits that works hand in hand with the CPU’s internal
sensor in monitoring the temperature of the CPU and prevent it
from overheating. This jumper enables or disables this function.
For more information, please check the ABR (Anti Burn
Regulator) paragraph on page 22.
Hardware Installation SY-KT600 DRAGON Ultra
13
G CPU Cooling Fan (CPUFAN1, CPUFAN2) connector
With this connector you can attach the CPU fan to your
motherboard. It supplies power to the fan, but does not allow
hardware monitoring. For more details on the lay-out of this
connector, check the CPU Fan Installation Paragraph on page 19,
and CPU Cooling Fan (CPUFAN1,CPUFAN2) on page 37.
H Onboard buzzer
This buzzer gives off system beeps.
I FJ1 RJ1 Dipswitch
This dipswitch is to set the multiplier of an unlocked CPU. Please
check the FJ1 RJ1 Dipswitch paragraph on page 24 for more
details.
J Bus Mastering EIDE/ATAPI Ports
These connectors is to attach your IDE devices to. These
connectors can support up to 4 IDE devices, 1 master and 1 slave
per connector. Please check the A. IDE Device installation
paragraph on page 28 for more details.
K AGP Pro connector
This connector is to install your AGP card in. This mainboard
supports up to AGP 8x. Note that this connector only supports
1.5V AGP cards. 3.3V cards will not work and can damage your
mainboard. Please check the Step 3 Install Expansion Card
paragraph on page 27 for more details.
L CDIN/AUXIN CDROM Audio In connectors
These connectors are to attach your CDROM Audio port to. Audio
CDs played on your CDROM or DVDROM will be send via the
cable to the mainboard. Please check for more details on page 40 in
the CD Line-in (CDIN1,AUXIN1) paragraph.
M Chassis Cooling Fan (CHAFAN1,CHAFAN3) connectors
These connectors are to connect your chassis fans to your
motherboard. This motherboard supports up to 3 chassis fans.
Please check the (2) Chassis Cooling Fan
(CHAFAN1,CHAFAN2,CHAFAN3) paragraph on page 37 for
more details.
N Serial ATA Harddisk connectors (SATA1, SATA2, SATA3,
SATA4)
These connectors are to attach your UDMA150 SATA harddisks
to. For more details, please check the A. IDE Device Installation
(HDD, CD-ROM) paragraph on page 28.
Hardware Installation SY-KT600 DRAGON Ultra
14
O Floppy disk connector
This motherboard supports one floppydrive. For more details,
please check the B. Floppy Drive Installation paragraph on page
29.
P Silicon Image Sil3112 Serial ATA RAID chip
The SiI 3112 enables OEMs to support new Serial ATA devices for
the highest data transfer rates (1.5 Gbps burst), simpler disk drive
cabling and easier PC assembly. Featuring a 32-bit 33/66 MHz PCI
interface, the SiI 3112 supports two independent Serial ATA
devices, capable of working as a normal IDE or in a RAID 0 or
RAID 1 configuration. Connected to it are SATA3 and SATA4. For
more details, please check the A. IDE Device Installation (HDD,
CD-ROM) paragraph on page 28.
Q Silicon Image Sil3112 Activity LED
This LED will light if one of the devices (SATA3, SATA4)
connected to the Sil3112 SATA RAID controller is active.
R Front Panel connectors (J25)
This header allows you to connect the switches and LEDs on your
front panel. Please check the C. Front Panel Connections chapter
on page 31 for more details and lay-outs.
S J25 Front panel connections header
This header contains the connections to the front panel on the case.
For more details, please check the C. Front Panel Connections
paragraph on page 30.
T VIA VT8237 South Bridge
Featuring the first ever integrated combined Serial ATA/RAID
controller, the VT8237 is the most advanced South Bridge
available on the market today. With its integrated dual channel
native Serial ATA/RAID controller supplying 150MB/s of
bandwidth per port and support for RAID 0, RAID 1, and RAID
0+1, the VT8237 delivers the highest disk data transfer rates for
maximum system performance and provides the most advanced
fault tolerant solution for optimum data integrity. The VT8237 also
features support for up to four Parallel ATA-133 devices, extending
flexibility to the system integrator by allowing for mainstream or
value configurations leveraging the existing technology standard.
Additional features on the VIA VT8237 South Bridge include
support for up to eight USB 2.0 ports, and integrated PCI support.
Hardware Installation SY-KT600 DRAGON Ultra
15
U 3V Lithium Battery
This battery supplies power to the CMOS RAM. As long as the
battery supplies enough power, the contents of your CMOS RAM
will be valid. CMOS RAM contents are configured by CMOS
setup, and can be cleared by JP5. For more details on this check the
H. CMOS Clear (JP5) paragraph on page 46.
V VIA VT6306 IEEE 1394 Firewire controller
The VIA Fire II VT6306 provides direct connectivity between the
PCI and 1394 serial buses. With three ports, the VIA Fire II
VT6306 is designed to provide scalability and manageability in
IEEE 1394 network solutions for home networking and multiple
PC access to a single internet connection. Each individual port
detects connected device types and automatically configures data
speeds to either 100, 200 or 400 Mbps, speeds well suited to
multi-streaming I/O requirements. A programmable PCI power
management mode (specification 1.1) shuts down power to
unconnected ports while the sleep function maximizes power
efficiency of connected ports.
W CMOS Clear Jumper (JP5)
This jumper allows you to clear your CMOS RAM contents in
order to reset your system configuration. . For more details on this
check the H. CMOS Clear (JP5) paragraph on page 46.
X 5V Stand-By Indicator LED
The power supply will always supply a 5V standby voltage to your
motherboard so that it can power on via for example Wake On Lan
technology. This LED shows that your power supply is supplying
this standby voltage to your motherboard.
Y USB 2.0 connectors
These connectors support 2 USB 2.0 ports per connector. For
details on the lay-out, please check the 5. Universal Serial Bus
(USB1/USB2, USB20_2/USB20_4) paragraph on page36.
Z Serial Infrared (IrDA) device header
This header allows you to connect an IrDA receiver to the
motherboard. You can find the lay-out in the 1. Standard Infrared
(SIRCON) paragraph on page 39.
AA GAME1 Gameport connector
This connector allows you to connect a gameport to your system.
For more details on pin layout for the gameport, please check the 6.
Onboard Game port/audio (Audio Speakers connections)
paragraph on page 36.
Hardware Installation SY-KT600 DRAGON Ultra
16
AB Flash BIOS
This chip contains the system BIOS firmware, and is software
upgradable. It's size is 2Mbit. For updates of your Flash BIOS,
please go to http://www.soyousa.com. For details on how to setup
your BIOS, please go to the 2-3 Quick BIOS Setup chapter on page
48.
AC ITE IT8705F Super I/O Chip
IT8705F is a LPC Interface based highly integrated Super I/O.
IT8705F provides the most commonly used legacy Super I/O
functionality plus the latest Environment Control initiatives, such
as Hardware Monitor, Fan Speed Controller and ITE’s
“SmartGuardian” function. The device’s LPC interface complies
with Intel “LPC Interface Specification Rev. 1.0” (Sept. 29, 1997).
IT8705F meets the “Microsoft PC98/99/2001 System Design
Guide” requirements and is ACPI compliant.
AD Center & Bass select connector (JP30)
Because some speaker manufacturers connect their center and bass
speakers different, this jumper allows you to select how your
center and bass speakers are connected. See the G. Ce nt e r & B as s
Select Connector (JP30) paragraph on page 46 for more details.
AE SPK5 connector
This connector is to connect the speaker attached to your case to
your motherboard. Please check the 6. SPK5 paragraph on page 43
for more details.
AF CD SPDIF In connector
This connector is to connect the Digital SPDIF out of your
CDROM to your mainboard. For information on the pinout, please
check the 7. CD_SPDIF paragraph on page 43.
AG 32 bit PCI slots
These are the motherboard's 3.3v busmastering PCI slots,
compliant to PCI specification v2.2. Please check the Step 3 Install
Expansion Card paragraph on page 27 for more details.
AH CMedia CMI 8738 PCI 6 Channel hardware audio chip
The CMI 8738 chip is a 2/4/6 Channel PCI hardware audio chip,
which uses the HRTF 3D positional audio technology. It is SB Pro
compatible and supports SPDIF IN/OUT. It also has a DLS
(DownLoadable Sound) wave table music synthesizer which
supports DirectMusic.
Hardware Installation SY-KT600 DRAGON Ultra
17
AI Broadcom 10/100/1000BASE-T Gigabit Ethernet
The BCM5705K is a fully integrated 10/100/1000BASE-T Gigabit
Ethernet Media Access Control and Physical Layer Transceiver
solution for high-performance network applications. The
BCM5705K combines triple-speed, IEEE 802.3 compliant media
access controller (MAC), PCI bus interface, on-chip buffer
memory, and integrated physical layer transceiver in a single
device.
AJ Back panel connectors
These connectors allow you to attach the external devices to the
back of your PC. Please check the D. Back Panel Connections
paragraph on page 33 for more details.
AK Smart Card Reader connector
This connector allows you to connect a smart card reader to the
PC/SC, ISO 7816 compliant onboard smart card reader. The
paragraph 5. SMCARDCN on page 41 contains more information
on the lay-out of this header.
Hardware Installation SY-KT600 DRAGON Ultra
18
Chapter 2
HARDWARE INSTALLATION
Congratulations on owning a-SY-KT600 DRAGON Ultra. You are about
to install and connect your new motherboard.
Note: Do not unpack the motherboard from its protective
anti-static packaging until you have made the following
preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to complete the
installation successfully:
1. Socket A processor with built-in CPU cooling fan (boxed type)
2. DDR RAM module (s)
3. Computer case and chassis with adequate power supply unit
4. Monitor
5. PS/2 Keyboard
6. Pointing Device (PS/2 mouse)
7. Speaker(s) (optional)
8. Disk Drives: HDD, CD-ROM, Floppy drive…
9. External Peripherals: Printer, Plotter, and Modem (optional)
10. Internal Peripherals: Modem and LAN cards (optional)
Hardware Installation SY-KT600 DRAGON Ultra
19
2-2 INSTALLATION GUIDE
We will now begin the installation process. Please follow the step-by-step
procedure designed to lead you to a complete and correct installation.
Step 1- Install the Central Processing Unit (CPU)
Step 2- Install memory modules
Step 3- Install expansion cards
Step 4- Connect cables, case wires, and power supply
Step 5- Power on and enter BIOS setup
Step 6- Install supporting software tools. See Chapter 4 for more info.
Warning: Turn off the power to the motherboard, system chassis,
and peripheral devices before performing any work on the
motherboard or system.
BEGIN THE INSTALLATION
Step 1 Install the CPU
CPU Mount Procedure:
To mount the AMD
®
K7 Athlon XP or Duron
TM
processor that you have purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.
Hardware Installation SY-KT600 DRAGON Ultra
20
2. Align the blunt edge of the CPU with the matching pinhole distinctive
edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the
appropriate power connector on the motherboard. The fan is a
key component that will ensure system stability. It prevents
overheating, therefore prolonging the life of your CPU.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125

SOYO SY-KT600 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI