Page is loading ...
FULL BED WITH TWIN TRUNDLE AND 2 DRAWERS
ASSEMBLY INSTRUCTIONS
1
YX5504
If you have any questions, please feel free to contact us.
Email: [email protected]
Detail View
2
Part ListPart List
A
HB/FB horizontal - 4pcs
BC
D E F
GH
Drawer front - 2pcs Drawer back - 2pcs
J
Drawer (Left / Right)- 4pcs
K
Drawer bottom - 4pcs Drawer support - 2pcs
L
HB/FB side panel - 2pcs Leg (Left front&Right back) - 2pcs
Side rail (Front & back) - 2pcs Slat - (10pcs)
3
Leg (Left back&Right front) - 2pcs
Trundle Slat - (8pcs)Back panel side rail of trundle - 1pc
M
Front panel of trundle - 1pc
O
N P
Support slat - 1pc
Q
Leg support - 3pcs
13 14
11 12
Wheels (4pcs)
Wood screws (16pcs)
Metal bracket (2pcs)
100*63*20mm
Metal bracket (2pcs)
Hardware List
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
2 3
6
Hex-Head bolts (8pcs)
Hex-Head bolts (8pcs)
10
Horizontal-Hole bolts(24pcs)
1/4"*15 (9.5mm)
Wood screws (62pcs)
97 8
Wheels (8pcs)
1
Wood dowel (24pcs)
4
Hex-Head bolts (8pcs)
5
Allen key (1pc)
(1/4")4.5*58mm
Wood dowel (8pcs)
Drawer stoopper (5pcs)
70*35*19 mm100*54*20 mm
4
STEP 1:
3
3
8PCS
3 6
8PCS
3
3
66
3
Note:Part 6 will face up with the "x" mark on it,
otherwise it cannot be tightened
6
10
6PCS 3PCS
8
8
10
Drawer stoopper (8) with side rail (Front) by using screw (10).
STEP 2:
x 2
5
10
4PCS 2PCS
8
8
10
10
10
8
8
Trundle stoopper (8) with side rail (Back) by using screw (10).
STEP 3:
10
10
10
8
8
8
5
STEP 4:
6
STEP 5:
8PCS
2 6
8PCS
2
6
2
2
2
2
5
10
12PCS
10
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need
STEP 6:
7
4PCS
4 6
4PCS8PCS
1
4
6
1
x 2
STEP 7:
10
5
STEP 8:
4PCS
4 6
4PCS16PCS
1
41
6
1
x 2
10
16PCS8PCS
7
8PCS
9
STEP 9:
7
9
10
x 2
8
5
10
8PCS
STEP 10:
10
16PCS
10
STEP 11:
9
4PCS
11
10
11
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need
10
STEP 12:
8PCS2PCS
12 14
STEP 13:
8PCS 2PCS
1314
11
STEP 14:
Push Drawers and Trundle under the bottom of Full bed.
/
