ATHMILE BTLE000140K User manual

Type
User manual
1
ASSEMBLY INSTRUCTIONS
HIGH LOFT BED WITH BOOKCASE
WF286266/WF286267
If you have any questions, please feel free
to contact us.
2
SAFETY WARNING !!
1. This bed is designed for use only mattress (es) meeting the following specifications on the loft
bed:
Up bed (Loft bed and tribed included)
Bed type
Twin Standard Length
74"-75" With
38 1/2" Thickness
6" max
2. Replacement parts, including additional guardrails, maybe obtained from any of our
(GIGACLOUD TECHNOLOGY (USA) INC.) dealers
3. Follow the information on the warnings appearing on the loft bed. end structure and on the
carton. Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the loft bed.
7. Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the loft bed.
10. Do not use substitute part. Contact the manufacture or dealer for replacement part.
11. Use of a night light may provide added safety precaution for a child using the loft bed.
12. Always use guardrails on both long sides of the loft bed. If the loft bed will be placed next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the loft bed that are
not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
15. Keep these instruction for future reference.
Detail View
3
U
T
Part List
4
FG
H I J
MK N
O O1
PP1
Leg HB (Left) - 1pc Leg HB (Right) - 1pc
Leg FB (Right) - 1pc Leg FB (Left) - 1pc Side rail (Back) - 1pc
Long guard rail - 2pcs Side rail (Front) - 1pc
Guard rail support (Left)-1pc Guard rail support (Right)-1pc
Short guard rail - 2pcs
Left side ladder -1pc Right side ladder -1pc
Hardware List WF286266
R
Bottom panel -1pc
B
Side panel - 2pcs
Z1
Horizontal bar (Right)- 1pc
CD
D1 E
Horizontal bar(L/R)-2pcs Horizontal bar(Left) - 1pc
Horizontal bar(Right) - 1pc Horizontal bar - 2pcs
X1
Slats - 14pcs
L
Step ladder -5pcs
Vertical guard rail - 1pc
Q
Part List
5
S
Left side panel - 1pc
T
Middle shelf - 1pc
U U1
V W
Y Z
Upper shelf (L&R) - 2pcs
Left side panel - 1pc Right side panel - 1pc
Middle shelf (L&R) - 2pcs
Lower shelf (L&R) - 2pcs Back panel - 4pcs
X
Support panel (L&R) - 2pcs
WF286267
A
HB & FB - 2pcs
T1
Right side panel - 1pc
Hardware List
6
1 2 3
4 5 6
Wood dowel (4pcs) Hex-Head bolts (36pcs)
 
Horizontal-Hole bolts(78pcs)
1/4"*15 (9.5mm)
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
Wood screws (32pcs)

7
Hex-Head bolts (4pcs)

8
Hex-Head bolts (11pcs)

9
10 11
Hex-Head bolts (8pcs)

Hooks (2pcs)
Foam stick (2pcs)
Hex-Head bolts (38pcs)

81*26*21 (2.5mm)
Wood screws (6pcs)

12
Allen key (1pc)
(1/4")4.5*58mm
90*17*2mm
13 14 15
Wood screws (2pcs)

17
Metal bracket (2pcs)
58*16*15*(1.5mm)
16
Plastic anchor (2pcs)

Wood dowel (8pcs)

Wood screws (32pcs)

STEP 1:
7
STEP 2:
10PCS
3 8
10PCS
3
8
14
3
8
14
10PCS
3 8
10PCS
88
88
Note:Part 8 will face up with the "x" mark on it,
otherwise it cannot be tightened
Note:Part 8 will face up with the "x" mark on it,
otherwise it cannot be tightened
8
8O
4
1
1
STEP 3:
8
STEP 4:
8
16PCS
4PCS
4
8
4PCS
4PCS
1
16PCS
37
3PCS
3
3
3
8
8
8
8
8
8
8
8
7
M
I
JL
Z1
JL
88
STEP 5:
9
STEP 6:
6
4PCS
6
O
M
R
6
4PCS
R
M
STEP 7:
10
STEP 8:
U1
4PCS
5 8
4PCS
R
T1
55
8
8
R
R
U1
2
2
W
4PCS
2
8PCS
5 8
8PCS
4PCS
2
8PCS
5
STEP 9:
11
T
2
2
W
8
8PCS
STEP 10:
4PCS
5 8
4PCS
R
T
5
5
8
8
RR
U
STEP 11:
STEP 12:
12
7
8PCS
7
7
UJ
M
U1
U
U1
X
4PCS
5 8
4PCS
STEP 13:
STEP 14:
13
9
2PCS
5
10PCS
12
2PCS
11
4PCS
5
8
10PCS
8
11 11
9
12
9
9
12
13
32PCS
13
11
11
M
11
2PCS
STEP 15:
STEP 16:
14
10
28PCS
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you
need to leave a certain space at the edges, otherwise it will cause the board to break.
Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,

66,5mm
79mm
10
STEP A:
15
STEP B:
4PCS
17
2PCS
WALL
10
17
10
10
Installing the Anti-Tip Bracket.
Drill holes in the wall.
STEP C:
STEP D:
16
2PCS
WALL
WALL PLUG
16
16
16
WALL
15
2PCS
15
17
To drive plastic anchor into the wall.
Fix the bracket to the wall with screw.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

ATHMILE BTLE000140K User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI