Midmark Classic Series User guide

Brand: Midmark

Model: Classic Series

Type: User guide

Midmark Classic Series Wet-Ring Vacuums: Your Reliable Dental Vacuum System

The Midmark Classic Series Wet-Ring Vacuums are high-performance dental vacuum systems designed to provide reliable suction and efficient waste removal in dental operatories. With their powerful vacuum motors and durable construction, these vacuums ensure optimal suction for a wide range of dental procedures, including suctioning saliva, blood, and other fluids during dental treatments. Their wet-ring design helps minimize noise and odor, creating a more pleasant environment for both patients and dental professionals.

Midmark Classic Series Wet-Ring Vacuums: Your Reliable Dental Vacuum System

AA199700

Daily

A. Clean Vacuum Piping System.

Clean piping system with a non-foaming vacuum

system cleaner. Midmark recommends

Precision Clense™, Order No. 77000570.

B. Clean Vacuum Inlet Strainer.

Turn vacuum “OFF”. Remove, replace and or clean

filter bowl, screen and gasket. Reassemble. Turn

vacuum “ON”.

Vacuum

Inlet

Strainer

Water

Inlet

Strainer

Annually

A. Clean and or Replace Vacuum Relief

Filter.

Pull filter out of end cap. Blow off filter and or

replace if damaged. Replace filter in VRV end cap.

B. Clean Water Inlet Strainer.

Turn vacuum “OFF”. Remove cap on “Y” strainer

housing and pull out the wire intake strainer.

Rinse with water and blow off. Replace strainer

and cap. Turn vacuum “ON”.

C. Clean / Dust Vacuum Pump(s).

Wipe with a clean cloth to remove dust & debris.

Midmark Corporation

60 Vista Drive

Versailles, Ohio 45380

1-800- Midmark (643-6275)

www.midmark.com

Maintenance Kits

Mineral Reducer Kit

Order #: AVA8200

Includes:

• Installation instructions, housing,

cartridge, all necessary mounting

and installation hardware.

Order #: PFM8200

Includes:

• Cartridge for Mineral Reducer.

Vacuum Relief Valve Filter

Order #: 62935601

Includes:

• Filter

Vacuum Inlet Strainer

Order #:

Single Models – 62937301

Twin Models - 77005155

Includes:

• Filter bowl, screen and o-ring.

Dispos-A-Bowl

Order #:

Single Models – 77005167

Twin Models - 77005168

Includes:

• Container, lid and red safety tape.

Exhaust Silencer

Order #: 77000040

Includes:

• Single Vacs Only

Accessories

Note - Recycler Models Only

If you have low to no suction due to a clog by residue building up over time, there is a feature on

vacuum to keep it running until a service technician can troubleshoot the problem. Turn the water

by-pass valve to the OPEN position. This will by-pass the recycler and may keep the pump running.

Water

By-Pass

Valve In

Open

Position

Recycler

Models

Non-Recycler

Models

For Recycler To Be

Activated

During Normal

Operation The Water

By-Pass Valve Should

Be In the CLOSED

postion.

Recycler

Models

CLOSED Position

Shown

Style D

Equipment Alert

Scavenging polishing paste with abrasives,

running the pump with no water supplied, using

water with high mineral content, or water with

excessive sediment can damage or reduce the

lifespan of the pump and is not considered a

defect in material or workmanship.

AA199800

AA199500

Maintenance Guide

To ensure years of reliable service, follow the

maintenance schedule outlined in this guide.

If service is required, contact your authorized

Midmark dealer.

Dealer (name / phone):

__________________________________

Model Number:

__________________

Serial Number:

__________________

Date of Purchase:

_________________

Annual Maintenance Log

Date: Services Performed: Technician:

_____ _______________________ __________

10546500 Rev. FA2 (3/27/19)

ClassicSeries™

Wet-Ring Vacuums

LIMITED WARRANTY

SCOPE OF WARRANTY

Midmark Corporation (“Midmark”) warrants to the

original purchaser its new ClassicSeries™ products

and components (except for components not warranted

under “Exclusions”) manufactured by Midmark to be

free from defects in material and workmanship under

normal use and service. Midmark’s obligation under

this warranty is limited to the repair or replacement, at

Midmark’s option, of the parts or the products the

defects of which are reported to Midmark within the

applicable warranty period and which, upon examina-

tion by Midmark, prove to be defective.

APPLICABLE WARRANTY PERIOD

The applicable warranty period, measured from the

date of installation for the original user, shall be:

• ClassicSeries™ Wet Ring Vacuums: Five (5) years

or 10,000 usage hours (whichever comes first)

EXCLUSIONS

This warranty does not cover and Midmark shall not be

liable for the following: (1) repairs and replacements

because of misuse, abuse, negligence, alteration,

accident, freight damage, or tampering; (2) products

which are not installed, used, and properly cleaned as

required in the Midmark “Installation” manual and or

“maintenance” guide for this applicable product; (3)

products considered to be of a consumable nature; (4)

accessories or parts not manufactured by Midmark; (5)

charges by anyone for adjustments, repairs, replace-

ment parts, installation, or other work performed upon

or in connection with such products which is not

expressly authorized in writing in advance by Midmark.

EXCLUSIVE REMEDY

Midmark’s only obligation under this warranty is the

repair or replacement of defective parts. Midmark shall

not be liable for any direct, special, indirect, incidental,

exemplary, or consequential damages or delay,

including, but not limited to, damages for loss of profits

or loss of use.

NO AUTHORIZATION

No person or firm is authorized to create for Midmark

any other obligation or liability in connection with the

products.

THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND

IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES

OF ANY KIND INCLUDING ANY WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICU-

LAR PURPOSE. THIS WARRANTY IS LIMITED TO THE

REPAIR OR REPLACEMENT OF DEFECTIVE PARTS.

A. Rotate barrel clockwise to increase

“Hg.

B. Rotate barrel counterclockwise to

decrease “Hg.

Vacuum Level Adjustment

Procedure

VRV Location

Twin Model

Vacuum Relief Valve Filter

Pull filter out of Vacuum Relief

Valve end cap to clean or replace.

Single Model

Twin Model

AA186500

Increase “Hg

Decrease “Hg

Note: Vacuum Relief Valve is factory set at 10” Hg.

Perform “Vacuum Level Adjustment” Procedure if

adjustment is needed. Never adjust the VRV above

12” Hg on the vacuum gauge.

Midmark Classic Series User guide

Brand: Midmark

Model: Classic Series

Type: User guide

Midmark Classic Series Wet-Ring Vacuums: Your Reliable Dental Vacuum System

Download PDF

report

Midmark Classic Series User guide

Midmark Classic Series User guide

Related papers

Other documents