GRAN-51

Hatco GRAN-51 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Hatco GRAN-51 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What are the dimensions of the Hatco GRAN-51 Prep Line Overhead Warmer?
    What is included with the Hatco GRAN-51 Prep Line Overhead Warmer?
    How do I install the Hatco GRAN-51 Prep Line Overhead Warmer to the 7.5" (19 cm) Condiment Station?
    How do I operate the Hatco GRAN-51 Prep Line Overhead Warmer?
    How do I clean the Hatco GRAN-51 Prep Line Overhead Warmer?
Installation & Operating Manual
for McDONALD’S
PREP LINE OVERHEAD WARMER
MOUNTING TO 7½ " (19.0 cm)
CONDIMENT STATION
GLO-RAY® Model GRAN-51
(Left Hand Unit GRAN.00007)
(Right Hand Unit GRAN.00008)
CONTENTS
Introduction
1
Safety Instructions
1
Model Descriptions
2
Installation Instructions
2
Electrical Specifications
4
Electrical Rating Chart
4
Plug Configurations
4
IMPORTANT OWNER INFORMATION
Record the model number, serial number, voltage BUSINESS HOURS: 8:00 a.m. to 5:00 p.m.
(located on the specification plate) and purchase date of Central Standard Time
your Prep Line Overhead Warmer in the spaces below. (Summer Hours: June to September -
Please have this information available when calling 8:00 a.m. to 5:00 p.m. C.S.T.
Hatco for service assistance. Monday through Thursday
Model No. ___________________________ 8:00 a.m. to 3:30 p.m. C.S.T. Friday)
Serial No. ____________________________ TELEPHONE: (800) 558-0607
Voltage______________________________ PARTS & SERVICE FAX: (800) 690-2966
Date of Purchase ______________________
INTRODUCTION
This manual provides the installation and operating instructions
for the Prep Line Overhead Warmer. We recommend all
installation, operating and safety instructions appearing in this
manual be read prior to installation or operation of your Prep
Line Overhead Warmer. Safety instructions that appear in this
manual after a warning symbol and the words
WARNING or CAUTION printed in bold face are important.
Warning means there is the possibility of personal injury to
yourself or others. Caution means there is the possibility of
damage to the unit.
IMPORTANT SAFETY INSTRUCTIONS WARNING
1. Plug warmer into an electrical outlet of the
correct voltage, size and plug configuration. If the plug
and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size and
install the proper electrical outlet.
2. To prevent electric shock, always unplug the unit before
performing cleaning, maintenance or repair.
3. Some exterior surfaces on the foodwarmer will get hot
Use caution when touching these areas to avoid injury.
4. For safe and proper operation, the foodwarmer must be
located a reasonable distance from combustible walls and
materials. If safe distances are not maintained,
discoloration or combustion could occur.
1
Operation
4
Cleaning
4
Replacement Parts List. 5
Warranty
6
Authorized Part Distributors
Back Cover
MODEL DESCRIPTIONS
Warmer Dimensions: 51"L x 3"W x 2.5"H (129.5 x 7.6 x 6.4
cm).
This model includes:
(1) GRAN-51 Prep Line Overhead Warmer with on/off toggle
switch, and 6' (182.9 cm) cord and plug attached.
(1) Stainless Steel Reflector/Tray Stop, Part No.
04.08.411.00.
(5) Wing nuts, Part No. 05.04.172.00 (Includes two extra).
(1) Polycarbonate Personnel Protector, Part No.
04.12.083.00.
INSTALLATION INSTRUCTIONS
Tools needed to complete installation (to be supplied by installer):
(1) Marking pen or pencil
(1) Center punch
(1) Hammer
(1) Electric hand drill
(1) 9/32" drill bit for stainless steel
(1) Tape measure
To install the Glo-Ray model GRAN-51 Prep Line Overhead
Warmer to the 7'/2" (19 cm) Condiment Station:
NOTE: Identify the holes being used to attach the stainless
steel reflector/tray stop to warmer.
1. Loosen and remove the three (3) wing nuts from the back of the
unit. (Save wing nuts.)
2. Rest unit on a solid surface. Turn upside down. See Figure 1.
3. Squeeze food warmer against the front face until threaded posts
pop out of stainless steel reflector/tray stop holes.
Figure 1. Removing Threaded Posts From Tray Stop.
4. Starting at the end opposite the switch, lift and turn warmer
until threaded posts come completely out of housing and you
are able to separate the two pieces. See Figure 2.
Figure 2. Removing Warmer From Tray Stop.
5. Position stainless steel reflector/tray stop onto prep table
surface making sure the six (6) pre-drilled mounting holes are
facing up and it is tight against the 7-1/2" condiment station.
NOTE: Tray stop has six (6) holes. Left end switch models
utilize the right hole in each pair. Right end switch models
utilize the left hole in each pair.
6. Mark the location of the three (3) holes with a pen or pencil
and remove tray stop. See Figure 3.
Figure 3. Marking the Hole Locations.
2
INSTALLATION INSTRUCTIONS
Figure 4. Punching the Holes.
8. Using an electric hand drill and 9/32" drill bit, drill the three
(3) marked and indented holes through the condiment
station. See Figure 5.
Figure 5. Drilling the Holes.
9. Carefully remove any sharp edges.
10. Reposition the warmer into the stainless steel
reflector/tray stop. Slide the backside of the warmer up into
the stainless steel reflector/tray stop, making sure the three
(3) threaded posts on the back of the unit line up with the
three (3) holes in the stainless steel reflector/tray stop.
Guide threaded posts through each set of holes.
11. Peel off protective plastic film from stainless steel
reflector/tray stop.
12. Position GRAN-51 foodwarmer with stainless steel
reflector/tray stop onto condiment station, making sure the
three (3) threaded posts on the back of the unit line up with
three (3) holes just drilled. Guide threaded posts through
each set of holes and tighten securely using wing nuts
provided. See Figure 6.
Figure 6. Attaching Warmer to Condiment Station.
13. Remove protector paper from polycarbonate personnel
protector.
14. Position the personnel protector onto the warmer, aligning
the two pegs on the protector into the holes on the top of
the stainless steel reflector/tray stop.
3
7.
Using a center punch and hammer, indent or punch all three
(3) of the marked holes. See Figure 4.
Figure
7.
Completed Installation.
ELECTRICAL SPECIFICATIONS
ELECTRICAL RATING CHART
Model Voltage Watts Amps Plug Configuration
GRAN-51 120 650 5.4 NEMA5-15P
PLUG CONFIGURATION
Glo-Ray Prep Line Overhead Warmer, model GRAN-51, is
supplied from the factory with an electrical cord and plug. See
Figure 8.
WARNING
Plug warmer into an electrical outlet of the correct voltage,
size and plug configuration. If the plug and receptacle do not
match, contact a qualified electrician to determine the proper
voltage and size and install the proper electrical outlet.
OPERATION
CLEANING
WARNING:
To prevent electric shock, always unplug the Glo-Ray
overhead warmer before any cleaning or maintenance.
To preserve the bright finish of your Glo-Ray overhead warmer,
it is recommended that the exterior surfaces be wiped daily with
a damp cloth. Stubborn stains may be removed with a good
stainless steel cleaner or a non-abrasive cleaner.
CAUTION:
Use only non-abrasive cleaners. Abrasive cleaners could
scratch the finish of your food warmer marring its
appearance and making it susceptible to soil accumulations.
CAUTION:
Only soft cleaning cloths should be used to clean personnel
protectors. Personnel protectors are made of shatterproof
polycarbonate and will scratch if proper care is not taken.
The personnel protector may be removed for thorough
cleaning and polishing. They should be wiped daily with a
soft, damp cloth. If fine scratches are present, a good
polycarbonate cleaner may be used to polish the personnel
protectors and remove and scratches.
4
NEMA5
15P
Figure
8.
Plug
Configuration.
The GRAN
5
1
food warmer is controlled by the on/off toggle
switch. The switch must be in the "ON" position for the unit to
function. See Figure 9.
WARNING/CAU
TION:
Remove protective paper from personnel protector before
turning unit on.
Figure
9.
On/Off Toggle Switch.
REPLACEMENT PARTS LIST
PARTS COMMON TO ALL GRAN-51
ITEM DESCRIPTION PART NUMBER QUANTITY
1.
Wire Guard/Element Support
04.08.103.00
1
2. Personnel Protector 04.12.083.00 1
3. Metal Reflector Panel/Tray Stop 04.08.411.00 1
4. Wing Nuts 05.04.172.00 3
5. On/Off Indicator 07.01.058.00 1
PARTS SPECIFIC TO MODEL GRAN-51
ITEM DESCRIPTION 120V 200V 208V
208V
CSA Only 220V 240V
6. On/Off Toggle Switch 02.19.016.00
7. Heating Element, 650 Watt R02.08.205.00
8. Power Cord and Plug 02.18.080.00
9. Strain Relief for Power Cord 02.20.206.00
Electrical Drawing HS1-4295
Shaded area reflects export models only.
5
HATCO LIMITED WARRANTY
1. PRODUCT WARRANTY
Hatco warrants the products that it manufactures (the
"Products") to be free from defects in materials and
workmanship, under normal use and service, for a period
of one (1) year from the date of purchase when installed
and maintained in accordance with Hatco's written
instructions. Buyer must establish the product's purchase
date by returning Hatco's Warranty Registration Card or
by other means satisfactory to Hatco in its sole
discretion.
Hatco warrants the following Product components to be
free from defects in materials and workmanship from the
date of purchase (subject to the foregoing conditions) for
the period(s) of time and on the conditions listed below:
a) One (1) Year Parts and Labor PLUS One (1)
Addi tional Year Parts-Only Warranty:
Toaster Elements (metal sheathed)
Drawer Warmer Elements (metal sheathed)
Drawer Warmer Drawer Rollers and Slides Food
Warmer Elements (metal sheathed)
Display Warmer Elements (metal sheathed air
heating)
Holding Cabinet Elements (metal sheathed air
heating)
Cook and Hold Oven Elements (metal
sheathed)
b) One (1) Year Parts and Labor PLUS Four (4)
Additional Years Parts-Only Warranty on pro-
rated terms that Hatco will explain at Buyer's
Request:
3CS and FR Tanks
Mini Compact Tanks (stainless steel)
c) One (1) Year Parts and Labor PLUS Four (4)
Additional Years Parts-Only Warranty PLUS
Five (5) Year Parts-Only Warranty on prorated
terms that Hatco will explain at Buyer's Request:
Booster Heater Tanks (Castone)
d) One (1) Year Parts-Only Warranty for
components not installed by Hatco:
Accessory Components (including but not limited to
valves, gauges and remote switches)
THE FOREGOING WARRANTIES ARE EXCLUSIVE
AND IN LIEU OF ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR PATENT OR OTHER
INTELLECTUAL PROPERTY RIGHT
INFRINGEMENT. Without limiting the generality of
the foregoing, SUCH WARRANTIES DO NOT
COVER: Coated Incandescent light bulbs, glass
components or Product failure caused by liming or
sediment buildup in tanks, Product misuse, tampering or
misapplication, improper installation, application of
improper voltage, or recalibration of thermostats or high
limit switches.
2. LIMITATION OF REMEDIES AND
DAMAGES
Hatco's liability and Buyer's exclusive remedy hereunder
will be limited solely, at Hatco's option, to repair or
replacement by a Hatco-authorized service agency (other
than where Buyer is located outside of the United States
or Canada, in which case Hatco's liability and Buyer's
exclusive remedy hereunder will be limited solely to
replacement of part under warranty) with respect to any
claim made within the applicable warranty period
referred to above. Without limiting the generality of the
foregoing, all portable Products (as defined in N.S.F. 4-
4.28.4) shall be delivered by Buyer, at its sole expense,
to the nearest Hatco-authorized service agency for
replacement or repair. Hatco reserves the right to accept
or reject any such claim in whole or in part. Hatco will
not accept the return of any Product without prior
written approval from Hatco, and all such approved
returns shall be made at Buyer's sole expense. HATCO
WILL NOT BE LIABLE, UNDER ANY
CIRCUMSTANCES, FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, INCLUDING BUT NOT
LIMITED TO LABOR COSTS OR LOST PROFITS
RESULTING FROM THE USE OF OR INABILITY
TO USE THE PRODUCTS OR FROM THE
PRODUCTS BEING INCORPORATED IN OR
BECOMING A COMPONENT OF ANY OTHER
PRODUCT OR GOODS.
6
HATCO AUTHORIZED PARTS DISTRIBUTORS
ALABAMA
MARYLAND
OHIO/Continued
Jones McLeod Appl. Svc.
Electric Motor Service
Electrical Appl. Repair Service
Birmingham
205-251-0159
Baltimore
410-467-8080
Independence
216-459-8700
ARIZONA
GCS Services
E. A. Wichman Co.
Auth. Comm. Food Equip.
Silver Spring
301-585-7550
Toledo
419-385-9121
Phoenix
602-234-2443
MASSACHUSETT
S
OKLAHOMA
Byassee Equipment Co.
Ace Service Co., Inc.
Hagar Rest. Service, Inc.
Phoenix
602-252-0402
Needham
617-449-4220
Oklahoma City
405-235-2184
CALIFORNIA
MICHIGAN
Krueger, Inc.
Industrial Electric
Commercial Kitchen Service
Oklahoma City 405-528-8883
Huntington Beach
714-379-7100
Bay City
517-893-7688
OREGON
Chapman Appl. Service
Bildons Appliance Service
Bressie Electric Co.
San Diego
619-298-7106
Detroit
313-272-6515
Portland
503-231-7171
P & D Appliance
Midwest Food Equip. Service
PENNSYLVANIA
S. San Francisco
415-635-1900
Grandville
616-261-2000
Authorized Factory Service
COLORADO
MINNESOTA
Coraopolis
412-262-2330
All City Service
General Parts
FAST Comm. Appl. Service
Denver
303-292-1166
Bloomington
612-944-5800
Philadelphia
215-922-6245
Hawkins Commercial Appliance
Metro Appliance Service
GCS Service, Inc.
Englewood
303-781-5548
Minneapolis
612-546-4221
Pittsburgh
412-787-1970
CONNECTICUT
MISSOURI
K & D Service Co.
Drico Service
Gas Consumers Inc.
Harrisburg 717-236-9039
Hartford
860-236-4541
Kansas City
816-472-6477
Elmer Schultz Service]
S
FLORIDA
General Parts
Philadelphia
215-627-5401
Ross Comm. Appl. Service
Kansas City
816-421-5400
Electric Repair Co.
Jacksonville 904-355-2697
Kaemmerlen Parts & Service
Reading 610-376-5444
Nass Service Co.,
Inc.
St. Louis
314-535-2222
RHODE ISLAND
Orlando 407-425-2681
NEBRASKA
Marshall Electric Co.
Broward Gas Service
Anderson Electric
Providence
401-331-1163
Pompano Beach
954-971-0456
Omaha
402-341-1414
SOUTH CAROLINA
Comm. Appliance Service
NEVADA
Whaley Foodservice Repair
Tampa 813-663-0313
Burney's Commercial
W. Columbia 803-791-4420
GEORGIA
Las Vegas
702-736-0006
TENNESSEE
Southeastern Rest. Svc.
NEW J
ERSEY
Camp Electric
Norcross
770-446-6177
Jay Hill Repair
Memphis
901-527-7543
Fairfield 201-575-9145
Factory Service Center
r
HAWAII
Service Plus
Nashville 615-329-4024
Food Equip Parts & Service Honolulu
808
-
847
-
4871
Flanders
201-691-6300
TEXAS
NEW YORK
City Kitchen Service C.0.
ILLINOIS
Acme American Repairs, Inc.
Austin 512-719-4445
Benjamin & Sons
Chicago
773-327-7128
Brooklyn
718-456-6544
Stove Parts Supply
Eichenauer Elec. Service
Alpro Service Co.
Fort Worth
817-831-0381
Decatur
217-429-4229
Brooklyn
718-386-2515
Armstrong Repair Service
Appliance Installation
Houston
713-666-7100
Midwest Elec. Appl. Service
Buffalo 716-884-7425
San Antonio Rest. Equip.
Elmhurst
630-279-8000
Northern Parts Dist.
San Antonio
210-824-3271
INDIANA
Plattsburgh 518-563-3200
VIRGINIA
Comm. Parts & Service, Inc.
Daubers
Indianapolis
317-545-9655
J. B. Brady, Inc.
Syracuse
315-422-9271
Norfolk
757-855-4097
IOWA
NORTH CAROLINA
Daubers
Electric Motor Service Co.
Authorized Appliance
Springfield 703-866-3600
Davenport
319-323-1823
Charlotte
704-377-4501
WASHINGTON
KENTUCKY
Restaurant Appl. Service
Comm. Parts & Service, Inc.
OHIO
Seattle
206-524-8200
Louisville
502-367-1788
Akron/Canton Comm. Svc.inc.
WISCONSIN
LOUISIANA
Akron 330-753-6635
Appliance Service Center
Chandlers Parts & Service
Certified Service Center
Madison 608
-
246
-
3160
Baton Rouge 504-272-6620
Cincinnati
513
-
242
-
3139
General Parts & Service
Bana Comm. Parts, Inc.
Columbus Restaurant Service
Milwaukee
414-650-6666
Shreveport 318-631-6550
HATCO CORPORATION
P.O. Box 340500, Milwaukee, WI 53234-0500 U.S.A.
(800)558-0607 (414)671-6350 Parts & Service Fax (800) 690-2966 Int'l. Fax (414) 671-3976
Web Site: http://www.hatcocorp.com
Printed in U.S.A.
Form No. GRAN51M-697-1-AR
/