Designs and specifications subject to change without notice.
1111 N. Hadley Rd.
P.O. Box 1229
Ft. Wayne, IN 46801-1229
Tel: 888-417-5462
Fax: 800.285.9511
www.mercoproducts.com
©2010 Merco, LLC / Printed in the U.S.A. / 1576-1/10
Heated Drawer
FREESTANDING STANDARD
HD-1
BUILT-IN STANDARD
HD-1B
HD-2 HD-2B
HD-3 HD-3B
Models
Freestanding - Standard
Model † Watts Amps*
No. of
Drawers
Shipping
Weight
HD-1 450 3.8 One 97 lbs. (44 kg)
HD-2 900 7.5 Two 168 lbs. (76 kg)
HD-3 1350 11.3 Three 232 lbs. (105 kg)
Built-in - Standard
Model † Watts Amps*
No. of
Drawers
Shipping
Weight
HD-1B 450 3.8 One 88 lbs. (40 kg)
HD-2B 900 7.5 Two 159 lbs. (72 kg)
HD-3B 1350 11.3 Three 223 lbs. (101 kg)
*Based on 120 volts.
† Freestanding units are standard with 4” (102mm) legs. Accessory
6” (152mm) stainless legs, or 2” (51mm), 3” (76mm), 4” (102mm) or 5”
(127mm) diameter casters available.
Dimensions:
Freestanding models - ( Without legs or casters)
HD-1: 29¹⁄₂” W x 22⁵⁄₈” D x 11” H (749 x 575 x 279 mm)
HD-2: 29¹⁄₂” W x 22⁵⁄₈” D x 21¹⁄₈” H (749 x 575 x 537 mm)
HD-3: 29¹⁄₂” W x 22⁵⁄₈” D x 31¹⁄₄” H (749 x 575 x 794 mm)
Built-in models - (Excluding front mounting flange)
HD-1B: 28¹⁄₈” W x 22³⁄₈” D x 9³⁄₄” H (714 x 568 x 248 mm)
HD-2B: 28¹⁄₈” W x 22³⁄₈” D x 20” H (714 x 568 x 508 mm)
HD-3B: 28¹⁄₈” W x 22³⁄₈” D x 30¹⁄₈” H (714 x 568 x 765 mm)
Cord Location:
Back of unit, lower left corner.
Available Accessories
6” (152 mm) Stainless Steel Adjustable Legs
2” (51 mm) Diameter Swivel Casters
- adds 2½” (64 mm) to Height
3” (76 mm) Diameter Locking Casters
- adds 4¼” (110 mm) to Height
4” (102 mm) Diameter Locking Casters
- adds 5¼” (133 mm) to Height
5” (127 mm) Diameter Locking Casters
- adds 6¼” (159 mm) to Height
Water/Spillage Pan (Splash Baffle
recommended)
Splash Baffle (w/Water/Spillage Pan creates
humidified environment.)
Freestanding Models
22.361
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 2 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-396
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-396
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
21.019
29.251
22.361
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 2 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-396
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-396
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 3 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-397
REV
***
***
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-397
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
UNLESS OTHERWISE SPECIFIED
DIMS ARE IN INCHES
TOL ON ANGLE 2.0
2 PL 0.02 3 PL 0.016
HOLE SIZES: +.005/-.002
HATCO CORP., MILWAUKEE, WI
DESCRIPTION
HDWB 1 CONSTRUCTION
THIS PRINT IS NOT TO
BE REPRODUCED WITHOUT
PERMISSION OF HATCO CORP.
PART NUMBER
10.02.395.00
DRAWING NUMBER
10-02-395
REV
1
Group Pre-Release
SCALE:0.120 PROJ: 893100 SHEET 1 OF 1
10-02-395
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
1 RELEASED ECO.# - BEW JRM
RV DESCRIPTION DATE ENG RB
RELEASE AND REVISION HISTORY CK:
ITEM RATED
VOLTS
RATED
WATTS
RATED
AMPS
CORD PLUG
STYLE
WIRING
DIAGRAM
AGENCY APPROVALS
UL CUL NSF CE
1 120 1800 15.0 NEMA 5-15P HS1-1996 X X
2 208 1800 8.7 NEMA 6-15P HS1-2000 X X
3 240 1800 7.5 NEMA 6-15P HS1-2000 X X
4 220E 1800 8.2 CEE 7/7 (SHUKO) HS1-2000 X
5 240E 1800 7.5 BS 1363 (BRITISH) HS1-2000 X
6 220-230E 1800-1968 8.2-8.6 CEE 7/7 (SHUKO) HS1-4518 X X
7 230-240E 1653-1800 7.2-7.5 BS 1363 (BRITISH) HS1-4518 X X
BOTTOM SUPPORT DIMENSION
S
DIMENSION
S [MM]
NOTES
6" STAINLESS STEEL LEGS 6.000 TO 7.500 152 TO 191 STANDARD
4" DIAMETER CASTERS 5.250 133
5" DIAMETER CASTERS 6.250 159
AVAILABLE OPTIONS (PER DRAWER):
1) DESIGNER DRAWER FRONT COLOR: WARM RED, WHITE GRANITE, BLACK, NAVY BLUE,
GRAY GRANITE, OR HUNTER GREEN IN LIEU OF STANDARD STAINLESS STEEL
2) DRAWER TYPE: OVERSIZED DRAWER FRAME IN LIEU OF STANDARD DRAWER
DRAWER TYPE: BISCUIT PAN DRAWER IN LIEU OF STANDARD DRAWER WITH PAN
3) PAN TYPE: OVERSIZED PAN IN LIEU OF STANDARD PAN
PAN TYPE: 6" DEEP ECONO PAN IN LIEU OF STANDARD PAN
4) CHIP GUARD
ADDITIONAL OPTIONS:
1) DISPLAY: INDICATING ELECTRONIC TEMPERATURE CONTROL IN LIEU OF STANDARD
THERMOSTATIC CONTROL WITH DRUM DISPLAY
ACCESSORIES:
1) WATER/SPILLAGE PAN
2) SPLASH BAFFLE
3) BOTTOM SUPPORT HARDWARE (SEE TABLE)
Built-in Models