Gyration Gyrotransport Pro Operating instructions

Brand: Gyration

Model: Gyrotransport Pro

Type: Operating instructions

Gyration GyroTransport: pro Air Mouse

1. Remove the RF Receiver/Flash

Drive from the bottom of the

GyroTransport:pro Air Mouse.

2. Plug the RF Receiver/Flash Drive into

an available USB port on your computer.

The first time, the computer will

automatically detect the receiver and

install the appropriate drivers.

3. Turn on the Air Mouse by sliding the slide switch to

1 or 2.

4. Press and hold the Activation button with your

thumb and flex your wrist up, down and sideways

to move the mouse cursor on the screen. The

mouse cursor tracks the motions of your hand. Do

not use arm movements, just wrist motion (similar

to pointing a flashlight).

When you release the Activation button, the cursor

stops moving.

Use your thumb to press the left or right mouse button—

they act the same as on a normal mouse.

You can keep the cursor continuously active by double-

clicking the Activation button. To stop the continuous

activity, click the Activation button once.

6. The mouse buttons are always enabled, even when the mouse cursor is inactive. You can use

the left mouse button with your thumb to flip through a PowerPoint presentation even when

the mouse cursor is frozen on the screen.

7. When finished, make sure you slide the switch back to off and remove the

Receiver/Flash Drive from the computer USB port.

Insert the RF Receiver/Flash Drive back into the bottom of the GyroTransport:pro Air Mouse

for storage.

1
2

Gyration Gyrotransport Pro Operating instructions

Brand: Gyration

Model: Gyrotransport Pro

Type: Operating instructions

Related papers

Other documents