HP DesignJet Z3100 Photo Printer series User guide

Type
User guide

This manual is also suitable for

HP LF Printing Knowledge Center
Printing a Black & White photo for an exhibition
Printer: HP Designjet Z3100 series
Software: EFI Designer Edition for HP
Operating System:
Windows
1. First recommendations:
See the
Media type functionality & features and choose the most appropriate media.
It is essential you have the media type correctly calibrated with the printer, consult the
Calibrate my printer document.
In order to get a correct display, it’s also essential you have the monitor calibrated, consult
the
Profile my monitor document.
2. Open the EFI Designer Edition RIP.
3. EFI Designer Edition RIP settings; select Preferences:
Select Color tab:
o Color output preset: Select Photo.
o Image profiles:
Select EFI profiles.
Input RGB: Select your image profile, the profile of the scanner or
camera you have used to get the photos (source profile). If you don’t have
it, select Adobe RGB (1998). Select Perceptual intent.
Input CMYK: Select your image profile, if you don’t have it, Euroscale
Coated v2 (for Europe), U.S. Web Coated (SWOP) v2 (for US) and
Japan Standard v2 (for Japan). Select Perceptual.
If it is not there, select the Add profile button and browse to it.
o Media profiles (output):
Paper name: Select the paper type that is loaded in the printer (always
calibrated).
Print quality: 1200 x 1200.
2
o Advanced… button:
Select Convert whole images to grayscale.
Select OK.
3
Select Layout tab:
o Orientation: Select the orientation of your image on the paper.
o Select the Alignment and the Scaling settings you need.
Select Printer tab:
o Paper size: Select the paper size of the media loaded in the printer.
Select OK.
4. Select the Add button, browse to your file and select Open or drag and drop the file to the
spool panel.
5. Check the print layout before printing, select the file and press the Preview button, if it is ready
select Print. If you need to retouch any settings, you can do it in the Individual Job Settings
(View menu > Job Info).
You should consider that each person has their own perception and their own subjective opinion
about the result; this is because there are various factors that can influence our opinions, such as the
type of photo (portrait, landscape…), the source color space, the media used, the environmental
conditions, the subjective perception about your own photo, etc.... This means the printing suggestion
may not completely match with your own personal opinion.
4
For more information on HP Designjet products
www.hp.com/go/designjet
5
© 2007 Hewlett-Packard Development Company, L.P. The information contained
herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Adobe Photoshop and PostScript are trademarks of Adobe Systems Incorporated.
PANTONE is Pantone, Inc.'s check-standard trademark for color.
Rev. 1.0, 03/2007
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

HP DesignJet Z3100 Photo Printer series User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI