HP DesignJet Z3100 Photo Printer series User guide

Type
User guide

HP DesignJet Z3100 Photo Printer series offers professional-grade photo printing with stunning color accuracy and detail. Ideal for photographers, graphic designers, and artists, it features 12 inks, including chromatic red and blue, to produce a wide color gamut and smooth transitions. With a maximum resolution of 2400 x 1200 dpi, your prints will be sharp and detailed. The printer also boasts fast print speeds, up to 25 seconds per A1/D-size print, so you can quickly produce your work.

HP DesignJet Z3100 Photo Printer series offers professional-grade photo printing with stunning color accuracy and detail. Ideal for photographers, graphic designers, and artists, it features 12 inks, including chromatic red and blue, to produce a wide color gamut and smooth transitions. With a maximum resolution of 2400 x 1200 dpi, your prints will be sharp and detailed. The printer also boasts fast print speeds, up to 25 seconds per A1/D-size print, so you can quickly produce your work.

HP LF Printing Knowledge Center
Printing your banner
Application: Adobe InDesign CS2
Printer: HP Designjet Z3100 series
Software
: EFI Designer Edition for HP
Operating System: Mac OS X
1. First recommendations:
See the
Media type functionality & features and choose the most appropriate media.
It is essential you have the media type correctly calibrated with the printer, consult the
Calibrate my printer document.
In order to get a correct display, it’s also essential you have the monitor calibrated, consult
the
Profile my monitor document.
2. Open the EFI Designer Edition RIP.
3. EFI Designer Edition RIP settings; select Preferences:
Select Color tab:
o Color output preset: Select Photo.
o Image profiles:
Select EFI profiles.
Input RGB: Select your image profile, the profile of the scanner or
camera you have used to get the photos (source profile). If you don’t have
it, select Adobe RGB (1998). Select Perceptual intent.
Input CMYK: Select your image profile, if you don’t have it, Euroscale
Coated v2 (for Europe), U.S. Web Coated (SWOP) v2 (for US) and
Japan Standard v2 (for Japan). Select Relative Colorimetric intent.
If it is not there, select the Add profile button and browse to it.
o Media profiles (output):
Paper name: Select the paper type that is loaded in the printer (always
calibrated).
Print quality: 1200 x 1200.
2
Select OK.
4. Open Adobe InDesign CS2.
5. Configure the Color Settings, Edit menu > Color Settings…:
Make sure the Advanced Mode check box is ticked.
Working Spaces > RGB: Select the profile of the scanner or camera you have used to get
the photo (source profile), if you don’t have it, Adobe RGB (1998).
Working Spaces > CMYK: Euroscale Coated v2 (for Europe), U.S. Web Coated (SWOP)
v2` (for US) and Japan Standard v2 (for Japan).
Color Management Policies: Select Preserve Embedded Profiles.
Profile Mismatches: Select Ask When Opening and Ask When Pasting.
Missing Profiles: Select Ask When Opening.
Conversion Options > Intent: Select Perceptual (for RGB images) or Relative Colorimetric
(for CMYK images).
3
Select OK.
4
6. Open the image, File menu > Open…:
7. If the document has an embedded color profile that does not match the current working space,
select Leave the document as is... Otherwise, select Adjust the document to match
current color settings; in this case, if the displayed image does not look correct, try assigning
it to other color spaces with Edit > Assign Profile (try sRGB, Adobe RGB, ColorMatch
RGB and others) until you are satisfied.
Select OK.
8. Place the images if needed, File menu > Place…, browse to the image and select Open….
9. So that you get a good display select a High Quality Display, View menu > Display
Performance > High Quality Display.
10. Make sure you have configured the Document Setup appropriately for your document, File
menu > Document Setup….
11. Printer settings, File menu > Print…:
Printer: Select the printer (ex. EFISoftwarePrinter).
Page Setup… button:
Format for: Select your printer again.
Paper Size: Select the paper size of the media loaded in the printer.
Orientation: Select the orientation of your image on the paper.
Select OK.
Printer… button:
Select Printer Features in the drop-dawn menu:
Paper Size: Setup.
5
Select RIP’s Default on the others settings.
Select Print.
12. Adobe InDesign Print Settings:
Setup (left hand menu):
o Paper Size: Select Defined By Driver.
o Options: Select the scaling option you need.
Output (left hand menu):
o Color: Select Composite CMYK.
Color Management (left hand menu):
o Print: Select Document.
o Options > Color Handling: PostScript® Printer Determine Colors.
You don’t need to worry about the profiles and rendering intent because you will
select PostScript
®
Printer Determine Colors option in the application, then, the
RIP will determine which source profile and rendering intent should be used for the
conversion to the print space, these are the Image profiles settings of the RIP Color
Preferences. The application color settings will be overridden.
6
Select Print.
You should consider that each person has their own perception and their own subjective opinion
about the result; this is because there are various factors that can influence our opinions, such as the
type of photo (portrait, landscape…), the source color space, the media used, the environmental
conditions, the subjective perception about your own photo, etc.... This means the printing suggestion
may not completely match with your own personal opinion.
NOTE If the printed image does not look correct, you can try the following: Open and save your
image in your application, InDesign. Then, open the EFI Designer Edition RIP and print your design.
Please, consult the following document which explains this process step-by-step:
Printing your banner with your EFI Designer Edition RIP.
7
For more information on HP Designjet products
www.hp.com/go/designjet
8
© 2007 Hewlett-Packard Development Company, L.P. The information contained
herein is subject to change without notice. The only warranties for HP products and
services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Adobe Indesign and PostScript are trademarks of Adobe Systems Incorporated.
PANTONE is Pantone, Inc.'s check-standard trademark for color.
Rev. 1.0, 03/2007
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

HP DesignJet Z3100 Photo Printer series User guide

Type
User guide

HP DesignJet Z3100 Photo Printer series offers professional-grade photo printing with stunning color accuracy and detail. Ideal for photographers, graphic designers, and artists, it features 12 inks, including chromatic red and blue, to produce a wide color gamut and smooth transitions. With a maximum resolution of 2400 x 1200 dpi, your prints will be sharp and detailed. The printer also boasts fast print speeds, up to 25 seconds per A1/D-size print, so you can quickly produce your work.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI