MOUNTDOG C-BS Installation guide

Type
Installation guide
9.2 X 10 ft Backdrop Stand
User Manual
Package Contents
Assembly Instructions
Specifications
4 * Crossbar Pole 2 * Support Stand
4* Clamp
2 * Sand Bag
1 * Carry Bag
1.Keep the parts of this product away from fire and
heating source.
2.Keep the parts of this product out of reach of children
for safety concerns.
3.To get the best height and stability push down on the
base until the legs are widely opened.
4.Ensure that the two stands of the backdrop are of the
same height before putting on the hanging pole.
5.Always use the sand bag to further secure the stand.
Safety Instructions
2
A B
C D
3
4
3.A: Left End Hanging Pole
B: Extension Hanging Pole
C: Extension Hanging Pole
D: Right End Hanging Pole
Connect the left end hanging pole, extension hanging poles and right
end hanging pole together. If necessary, you can increase or decrease
the number of extension hanging poles according to length require-
ments.
4.Install the whole hanging pole onto the top of the two stands and
secure them with the wing nuts.
② Use clamps to fix rhe muslin backdrop.
③ Further secure the stand with sand bag (Please fill the sand bag with
sand first.)
1.Unfold the two stands and
fasten the side knobs to secure the
stands.
2.Untighten the side knobs on the
upper parts of the two stands and
then you can adjust their heights.
Remember to retighten the knobs
after you decide the heights.
Ensure that the two stands are of
the same height.
Specifications
Products
Materials
Adjustable Height
Pipe Diameter
Adjustable Width
Pipe Diameter
Weight Capacity
Material
Size
Maximum Opening
Material
Dimension
Material
Aluminum alloy
construction
2.7 ft - 9.2 ft
1 inch
5 ft - 10 ft
1.4 inch
11 lbs (5kg)
Synthetic Nylon
3.1 inch x 4.5 inch
2 inch mouth
Nylon
9 inch x 16.5 inch
Fabric
Backdrop
Support Stand
Cross Bar
Photo
Support Clamp
Sand Bag
Carry Bag
1
  • Page 1 1

MOUNTDOG C-BS Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI