TomTom Curfer OBD User manual

Brand: TomTom

Model: Curfer OBD

Type: User manual

This document explains how you can install the OBD extension cable to place your CURFER

device in a place that is distant to your vehicle's OBD connector.

What's in the box

 OBD extension cable

1. Male OBD plug - to plug into your vehicle's OBD connector

2. Handle

3. Data cable

4. Female OBD plug - to plug into the CURFER device

5. Fixation holes to affix the female OBD plug

 One sticky pad with a cleaning cloth

 Two cable ties

 Two self-tapping screws

Safety first

Important: Read the following safety instructions carefully.

TomTom Telematics accept no liability for damage that results from disregarding the safety

instructions.

This document is part of the product. Keep it in a safe place. If you pass the unit on to a new user,

make sure you give them this document as well.

Installing the OBD extension cable

 Caution - damage caused through improper installation

The installation must be performed by authorised personnel only for example, a qualified radio

dealer or an automotive electronics workshop.

 Caution - risk of injury in case of accidents

Do not mount the unit or accessories in the inflation area of airbags or in the impact area for

the head or knees. Choose an installation location that will avoid interference with displays,

safety equipment and controls.

 Caution - damage to the chassis

Make sure you do not drill into parts of the chassis that have structural or security-related

functions. This is because you cannot be certain that they will function properly after modifica-

tion.

 Caution - risk of fire

Make sure you do not drill into covered wiring harnesses, fuel lines or similar components.

Drilling into these can cause fire.

Installing the extension cable

1. Read the safety instructions to find the right place and avoid damages while affixing the

extension cable.

2. Find a place where to affix the female OBD plug, that is dry and is not exposed to wet

conditions.

3. Affix the female OBD plug using the fixation holes and the fixatives provided, so your CURFER

device can be operated in a stable position.

Important:

Your CURFER device comes with an integrated acceleration sensor. To ensure proper func-

tioning, the female OBD plug of the extension cable must be affixed so it does not allow any

motion during operation.

Make sure the cable does not interfere with driver's actions (gas pedal, gear lever, door etc.).

4. Insert the male OBD plug of the extension cable into your vehicle's OBD connector until it

tightly fits and cannot drop off.

5. Plug the female OBD plug of the extension cable into your CURFER device until it tightly fits

and cannot drop off.

6. Follow the installation instructions provided by the CURFER app.

copyright registrations where applicable, with further rights pending. No part of this product or its contents may be copied

without the express written permission of the rights holder.

and/or database rights protection and/or other intellectual property rights owned by TomTom or its suppliers. The use of

this material is subject to the terms of a licence agreement. Any unauthorised copying or disclosure of this material will

lead to criminal and civil liabilities.

Please see business.tomtom.com/legal for limited warranty and end user licence agreements applying to this product.

TomTom Curfer OBD User manual

TomTom Curfer OBD User manual

TomTom Curfer OBD User manual

Related papers

Other documents