Revell 85-1507 Operating instructions

Revell
Brand
Revell
Model
85-1507
Type
Operating instructions
DECAL PLACEMENT
20
Semi Gloss Black
Flat Tan
Gloss Blue
Yellow
Gloss Orange
Aluminum
Silver
Steel
Turn Signal Amber
Transparent Red
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Havane mat
Bleu brilliant
Jaune
Orange brilliant
Aluminum
Argent
Acier
Ambre
Rouge Transparent
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
KENWORTH
®
W900
KIT 1507 85150700200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85150700200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Kit 1507 - Page 12
The Kenworth W900 has every-
thing that long-haul truckers need
to get the job done. This impres-
sive Kenworth design sports a
duel sleeper capped with an
aerodynamic roofline which tells
everyone who sees it that it is truly
a road machine without equal.
Your Revell model features a
hood that tilts forward to show a
detailed tubocharged six cylinder
diesel engine, chrome plated sim-
ulated alloy wheels, duel exhaust
stacks, roof mounted horns and
mirrors with antennas. Decals
with optional stripes or cus-
tom graphics are also included.
REAR SUSPENSION ASSEMBLY
1
FUEL TANK ASSEMBLY
2
FRONT BUMPER ASSEMBLY
18
FINAL ASSEMBLY
19
Kit 1507 - Page 2
Kit 1507 - Page 11
72
FRONT
AXLE BOTTOM
SEMI GLOSS
BLACK
39
FRAME
SEMI GLOSS
BLACK
21
BUMPER LIGHTS
CLEAR
44
SUSPENSION
SEMI GLOSS
BLACK
46
REAR
AXLE BOTTOM
SEMI GLOSS
BLACK
★31
FUEL TANK HALF
CHROME
★25
BUMPER
CHROME
OR
DECAL
30
★18
AIR HORN
CHROME
★18
AIR HORN
CHROME
★19
CAB LIGHT
CHROME
(PAINT SHADED
AREA AMBER)
★60
RIGHT
SIDE MIRROR
CHROME
★20
LEFT
SIDE MIRROR
CHROME
★19
CAB LIGHT
CHROME
(PAINT SHADED
AREA AMBER)
★19
CAB LIGHTS
CHROME
(PAINT SHADED
AREAS AMBER)
TURN SIGNAL-
AMBER FRONT
RED BACK
TURN SIGNAL-
AMBER FRONT
RED BACK
★32
FUEL TANK HALF
CHROME
41
AIR TANK
ALUMINUM
41
AIR TANK
ALUMINUM
★33
FUEL TANK HALF
CHROME
★34
FUEL TANK HALF
CHROME
58
SUSPENSION
SUPPORT
SEMI GLOSS BLACK
58
SUSPENSION
SUPPORT
SEMI GLOSS BLACK
PAINT
RED
REAR ASSEMBLY
16
GRILLE ASSEMBLY
17
REAR WHEEL ASSEMBLY
3
FRONT SUSPENSION ASSEMBLY
4
Kit 1507 - Page 10
Kit 1507 - Page 3
★50
0UTER WHEEL
CHROME
52
INNER WHEEL
SEMI GLOSS BLACK
45
TIE ROD
SEMI GLOSS BLACK
38
AXLE
SEMI GLOSS BLACK
55
SHOCK
SEMI GLOSS BLACK
55
SHOCK
SEMI GLOSS BLACK
51
SPACER
SEMI GLOSS BLACK
★24
GRILLE
CHROME
★22
HEADLIGHT
HOUSING
CHROME
★22
HEADLIGHT
HOUSING
CHROME
23
HEADLIGHT LENS
CLEAR
23
HEADLIGHT
LENS
CLEAR
6
HOOD
BODY COLOR
★35
GRAB HANDLE
CHROME
★35
GRAB HANDLE
CHROME
★40
SKID PLATE
CHROME
DECAL
23
DECAL
23
42
MUD FLAPS
SEMI GLOSS BLACK
★43
TAILLIGHTS
CHROME
(PAINT LENS
TRANPARENT RED)
30
QUARTER
FENDER
SEMI GLOSS BLACK
26
PIVOT
SEMI GLOSS
BLACK
27
FIFTH
WHEEL
SEMI GLOSS
BLACK
CUT-A-WAY VIEW
DRAG LINK ASSEMBLY
5
FRONT WHEEL ASSEMBLY
6
CROSSOVER / EXHAUST ASSEMBLY
7
STACK ASSEMBLY
14
RADIATOR ASSEMBLY
15
Kit 1507 - Page 4
Kit 1507 - Page 9
71
CROSSOVER
PIPE
ALUMINUM
73
EXHAUST
COLLECTOR
STEEL
★48
0UTER WHEEL
CHROME
★53
0UTER STACK
CHROME
★54
INNER STACK
CHROME
★69
GRAB
HANDLE
CHROME
28
RADIATOR
FRONT
SEMI GLOSS BLACK
29
RADIATOR REAR
SEMI GLOSS BLACK
★69
GRAB
HANDLE
CHROME
49
INNER WHEEL
SEMI GLOSS BLACK
57
STEERING LINK
SEMI GLOSS BLACK
AIR CLEANER ASSEMBLY
12
BOX STEP ASSEMBLY
13
ENGINE ASSEMBLY
8
Kit 1507 - Page 5
Kit 1507 - Page 8
65
PULLY
ASSEMBLY
YELLOW PULLIES
WITH SEMI GLOSS
BLACK BELTS
64
TIMING COVER
YELLOW
12
AIR CLEANER
HALF
BODY COLOR
11
AIR CLEANER
HALF
BODY COLOR
13
AIR CLEANER
HALF
BODY COLOR
10
AIR CLEANER
HALF
BODY COLOR
15
AIR CLEANER
BRACKETS
BODY COLOR
67
COMPRESSOR
ALUMINUM
66
AFTER COOLER
YELLOW
63
HEAD ASSEMBLY
YELLOW
70
INJECTION
PUMP
YELLOW
SEMI GLOSS BLACK
61
LEFT
ENGINE HALF
YELLOW
SILVER
SEMI
GLOSS
BLACK
74
OIL FILTER
YELLOW
62
RIGHT
ENGINE HALF
YELLOW
ENGINE TO FRAME
RIGHT SIDE OF ENGINE
RIGHT
RIGHT
FIRST
LEFT
LEFT
★36
BATTERY BOX
STEP
CHROME
★14
AIR CLEANER
CAPS
CHROME
SECOND
DRIVESHAFT ASSEMBLY
9
INTERIOR ASSEMBLY
10
CAB / INTERIOR ASSEMBLY
11
Kit 1507 - Page 6
Kit 1507 - Page 7
47
DRIVESHAFT
SEMI GLOSS BLACK
3
SEATS
TAN
7
GEAR SHIFT
SEMI GLOSS
BLACK
5
STEERING
COLUMN
SEMI GLOSS BLACK
6
STEERING
WHEEL
SEMI GLOSS
BLACK
4
DASHBOARD
TAN
DIALS, BLACK WITH
SILVER RIMS AND DETAILS
2
INTERIOR
TAN
8
WINDSHIELD
CLEAR
1
CAB
BODY COLOR
59
SLEEPER WINDOW
CLEAR
68
AIR DUCT
ALUMINUM
SEMI GLOSS-
BLACK
SEMI GLOSS
BLACK
INTERIOR INTO CAB
BOTH
SIDES
CAB TO FRAME
CUT-A WAY
SHOWING
REAR SLOT
DRIVESHAFT ASSEMBLY
9
INTERIOR ASSEMBLY
10
CAB / INTERIOR ASSEMBLY
11
Kit 1507 - Page 6
Kit 1507 - Page 7
47
DRIVESHAFT
SEMI GLOSS BLACK
3
SEATS
TAN
7
GEAR SHIFT
SEMI GLOSS
BLACK
5
STEERING
COLUMN
SEMI GLOSS BLACK
6
STEERING
WHEEL
SEMI GLOSS
BLACK
4
DASHBOARD
TAN
DIALS, BLACK WITH
SILVER RIMS AND DETAILS
2
INTERIOR
TAN
8
WINDSHIELD
CLEAR
1
CAB
BODY COLOR
59
SLEEPER WINDOW
CLEAR
68
AIR DUCT
ALUMINUM
SEMI GLOSS-
BLACK
SEMI GLOSS
BLACK
INTERIOR INTO CAB
BOTH
SIDES
CAB TO FRAME
CUT-A WAY
SHOWING
REAR SLOT
AIR CLEANER ASSEMBLY
12
BOX STEP ASSEMBLY
13
ENGINE ASSEMBLY
8
Kit 1507 - Page 5
Kit 1507 - Page 8
65
PULLY
ASSEMBLY
YELLOW PULLIES
WITH SEMI GLOSS
BLACK BELTS
64
TIMING COVER
YELLOW
12
AIR CLEANER
HALF
BODY COLOR
11
AIR CLEANER
HALF
BODY COLOR
13
AIR CLEANER
HALF
BODY COLOR
10
AIR CLEANER
HALF
BODY COLOR
15
AIR CLEANER
BRACKETS
BODY COLOR
67
COMPRESSOR
ALUMINUM
66
AFTER COOLER
YELLOW
63
HEAD ASSEMBLY
YELLOW
70
INJECTION
PUMP
YELLOW
SEMI GLOSS BLACK
61
LEFT
ENGINE HALF
YELLOW
SILVER
SEMI
GLOSS
BLACK
74
OIL FILTER
YELLOW
62
RIGHT
ENGINE HALF
YELLOW
ENGINE TO FRAME
RIGHT SIDE OF ENGINE
RIGHT
RIGHT
FIRST
LEFT
LEFT
★36
BATTERY BOX
STEP
CHROME
★14
AIR CLEANER
CAPS
CHROME
SECOND
DRAG LINK ASSEMBLY
5
FRONT WHEEL ASSEMBLY
6
CROSSOVER / EXHAUST ASSEMBLY
7
STACK ASSEMBLY
14
RADIATOR ASSEMBLY
15
Kit 1507 - Page 4
Kit 1507 - Page 9
71
CROSSOVER
PIPE
ALUMINUM
73
EXHAUST
COLLECTOR
STEEL
★48
0UTER WHEEL
CHROME
★53
0UTER STACK
CHROME
★54
INNER STACK
CHROME
★69
GRAB
HANDLE
CHROME
28
RADIATOR
FRONT
SEMI GLOSS BLACK
29
RADIATOR REAR
SEMI GLOSS BLACK
★69
GRAB
HANDLE
CHROME
49
INNER WHEEL
SEMI GLOSS BLACK
57
STEERING LINK
SEMI GLOSS BLACK
REAR ASSEMBLY
16
GRILLE ASSEMBLY
17
REAR WHEEL ASSEMBLY
3
FRONT SUSPENSION ASSEMBLY
4
Kit 1507 - Page 10
Kit 1507 - Page 3
★50
0UTER WHEEL
CHROME
52
INNER WHEEL
SEMI GLOSS BLACK
45
TIE ROD
SEMI GLOSS BLACK
38
AXLE
SEMI GLOSS BLACK
55
SHOCK
SEMI GLOSS BLACK
55
SHOCK
SEMI GLOSS BLACK
51
SPACER
SEMI GLOSS BLACK
★24
GRILLE
CHROME
★22
HEADLIGHT
HOUSING
CHROME
★22
HEADLIGHT
HOUSING
CHROME
23
HEADLIGHT LENS
CLEAR
23
HEADLIGHT
LENS
CLEAR
6
HOOD
BODY COLOR
★35
GRAB HANDLE
CHROME
★35
GRAB HANDLE
CHROME
★40
SKID PLATE
CHROME
DECAL
23
DECAL
23
42
MUD FLAPS
SEMI GLOSS BLACK
★43
TAILLIGHTS
CHROME
(PAINT LENS
TRANPARENT RED)
30
QUARTER
FENDER
SEMI GLOSS BLACK
26
PIVOT
SEMI GLOSS
BLACK
27
FIFTH
WHEEL
SEMI GLOSS
BLACK
CUT-A-WAY VIEW
REAR SUSPENSION ASSEMBLY
1
FUEL TANK ASSEMBLY
2
FRONT BUMPER ASSEMBLY
18
FINAL ASSEMBLY
19
Kit 1507 - Page 2
Kit 1507 - Page 11
72
FRONT
AXLE BOTTOM
SEMI GLOSS
BLACK
39
FRAME
SEMI GLOSS
BLACK
21
BUMPER LIGHTS
CLEAR
44
SUSPENSION
SEMI GLOSS
BLACK
46
REAR
AXLE BOTTOM
SEMI GLOSS
BLACK
★31
FUEL TANK HALF
CHROME
★25
BUMPER
CHROME
OR
DECAL
30
★18
AIR HORN
CHROME
★18
AIR HORN
CHROME
★19
CAB LIGHT
CHROME
(PAINT SHADED
AREA AMBER)
★60
RIGHT
SIDE MIRROR
CHROME
★20
LEFT
SIDE MIRROR
CHROME
★19
CAB LIGHT
CHROME
(PAINT SHADED
AREA AMBER)
★19
CAB LIGHTS
CHROME
(PAINT SHADED
AREAS AMBER)
TURN SIGNAL-
AMBER FRONT
RED BACK
TURN SIGNAL-
AMBER FRONT
RED BACK
★32
FUEL TANK HALF
CHROME
41
AIR TANK
ALUMINUM
41
AIR TANK
ALUMINUM
★33
FUEL TANK HALF
CHROME
★34
FUEL TANK HALF
CHROME
58
SUSPENSION
SUPPORT
SEMI GLOSS BLACK
58
SUSPENSION
SUPPORT
SEMI GLOSS BLACK
PAINT
RED
DECAL PLACEMENT
20
Semi Gloss Black
Flat Tan
Gloss Blue
Yellow
Gloss Orange
Aluminum
Silver
Steel
Turn Signal Amber
Transparent Red
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Havane mat
Bleu brilliant
Jaune
Orange brilliant
Aluminum
Argent
Acier
Ambre
Rouge Transparent
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
KENWORTH
®
W900
KIT 1507 85150700200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85150700200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Kit 1507 - Page 12
The Kenworth W900 has every-
thing that long-haul truckers need
to get the job done. This impres-
sive Kenworth design sports a
duel sleeper capped with an
aerodynamic roofline which tells
everyone who sees it that it is truly
a road machine without equal.
Your Revell model features a
hood that tilts forward to show a
detailed tubocharged six cylinder
diesel engine, chrome plated sim-
ulated alloy wheels, duel exhaust
stacks, roof mounted horns and
mirrors with antennas. Decals
with optional stripes or cus-
tom graphics are also included.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Revell 85-1507 Operating instructions

Revell
Brand
Revell
Model
85-1507
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents