Revell 7208 User manual

Revell
Brand
Revell
Model
7208
Type
User manual

This manual is also suitable for

DECAL PLACEMENT
17
Semi Gloss Black
Steel
Flat Green
Gray
Silver
Gloss Red
Tan
Gloss Cream
Gloss Dark Blue
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Acier
Vert mat
Gris
Argent
Rouge brillant
Tan
Créme brillant
Bleu foncé brillant
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
'37 FORD PICKUP STREET ROD
2 'N 1
KIT 7208 85720800200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85720800200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Kit 7208 - Page 12
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* REPEAT PROCEDURE
* R E P E T E Z L E P R O C E D E
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
``` ` ``
In 1937, for the first time, Ford
Trucks had their own styling which
was very distinctive from the Ford
car line. Design wise, Ford had defi-
nately stepped ahead of the compe-
tition with its new grille, split wind-
shield and completely redesigned cab.
Your Revell model features a stock flat
head V-8 or custom manifold with dual
carbs and high compression heads,
vintage truck wheels and tires or steel
wheels with dog dish hub caps, a '38
grille and hood, optional headlights,
wood stake sides, lowered suspen-
sion, dual exhaust and surf board.
Authentic decals for factory stock and
custom graphics are also included.
STREET ROD ENGINE ASSEMBLY
1
HOOD / MIRROR / STAKE ASSEMBLY
15
FINAL ASSEMBLY
16
Kit 7208 - Page 2
Kit 7208 - Page 11
32
RIGHT
ENGINE HALF
FLAT GREEN
31
LEFT
ENGINE HALF
FLAT GREEN
★134
EDELBROCK
CYLINDER HEAD
CHROME
★124
HOOD
ORNAMENT
CHROME
★16
SIDE MIRROR
CHROME
112
RIGHT
STAKE SIDE
TAN
110
STAKE SIDE
FRONT
TAN
111
LEFT
STAKE SIDE
TAN
★125
INTAKE MANIFOLD
CHROME
★126
DUAL CARBURETORS
CHROME
105
LEFT
EXHAUST MANIFOLD
STEEL
104
RIGHT
EXHAUST MANIFOLD
STEEL
34
ENGINE FRONT
FLAT GREEN
79
RIGHT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
80
LEFT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
41
FAN BELT
SEMI GLOSS BLACK
42
FAN
SEMI GLOSS BLACK
50
GENERATOR
SEMI GLOSS BLACK
43
DISTRIBUTOR
SILVER
★128
FUEL PUMP
CHROME
★134
EDELBROCK
CYLINDER HEAD
CHROME
★129
FILLER TUBE
CHROME
★127
AIR CLEANERS
CHROME
BOTH ENGINES
STOCK
STOCK
★73
SPARE TIRE
HUB CAP
CHROME
63
SPARE TIRE
OUTER WHEEL
BODY COLOR
TIRE
62
SPARE TIRE
INNER WHEEL
BODY COLOR
★120
HUB CAP
CHROME
100
HOOD TOP
BODY COLOR
109
SURF BOARD
TAN
115
SPARE TIRE
COVER
BODY COLOR
7
HOOD
BODY COLOR
SEMI GLOSS
BLACK
49
STARTER
SEMI GLOSS BLACK
RIGHT SIDE
WHEEL ASSEMBLY
13
CAB / HOOD SIDE ASSEMBLY
14
STOCK ENGINE ASSEMBLY
2
Kit 7208 - Page 10
Kit 7208 - Page 3
REAR STOCK
FRONT STOCKSTREET ROD
STREET RODCAB TO FRAME
41
FAN BELT
SEMI GLOSS BLACK
42
FAN
SEMI GLOSS BLACK
50
GENERATOR
SEMI GLOSS BLACK
43
DISTRIBUTOR
SILVER
34
ENGINE FRONT
FLAT GREEN
79
RIGHT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
80
LEFT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
45
RIGHT
EXHAUST MANIFOLD
STEEL
44
LEFT
EXHAUST MANIFOLD
STEEL
★36
CARBURETOR
CHROME
33
CYLINDER HEAD
FLAT GREEN
33
CYLINDER HEAD
FLAT GREEN
35
INTAKE MANIFOLD
FLAT GREEN
39
REAR
FUEL PUMP HALF
ALUMINUM
37
AIR FILTER TOP
SEMI GLOSS BLACK
38
AIR FILTER
BOTTOM
SEMI GLOSS BLACK
40
FRONT
FUEL PUMP HALF
ALUMINUM
★120
HUB CAP
CHROME
★69
HUB CAP
CHROME
★69
HUB CAP
CHROME
113
OUTER WHEEL
RED
64
OUTER WHEEL
BODY COLOR
64
OUTER WHEEL
BODY COLOR
101
LEFT
HOOD SIDE
BODY COLOR
102
RIGHT
HOOD SIDE
BODY COLOR
114
INNER WHEEL
SEMI GLOSS BLACK
TIRE
TIRE
TIRE
59
FRONT
INNER WHEEL
SEMI GLOSS BLACK
74
REAR
INNER WHEEL
SEMI GLOSS BLACK
49
STARTER
SEMI GLOSS BLACK
RIGHT SIDE
STREET ROD SUSPENSION ASSEMBLY
3
STREET ROD EXHAUST ASSEMBLY
4
FRONT / STAKE ASSEMBLY
11
REAR ASSEMBLY
12
Kit 7208 - Page 4
Kit 7208 - Page 9
STOCK
51
FRAME
SEMI GLOSS BLACK
106
LEFT
EXHAUST PIPE
STEEL
107
RIGHT
EXHAUST PIPE
STEEL
46
GAS TANK
GRAY
ALUMINUM
ALUMINUM
108
REAR DROP AXLE
SEMI GLOSS BLACK
135
REAR
AXLE BOTTOM
SEMI GLOSS BLACK
66
LEFT
TAILLIGHT BRACKET
GLOSS BLACK
67
RIGHT
TAILLIGHT BRACKET
GLOSS BLACK
★65
TAILLIGHT
HOUSING
CHROME
155
TAILLIGHT LENS
TRANSPARENT RED
★65
TAILLIGHT
HOUSING
CHROME
★14
HEADLIGHT
BUCKET
CHROME
★13
HEADLIGHT
BUCKET
CHROME
★122
HEADLIGHT SHELL
CHROME
★123
HEADLIGHT RIM
CHROME
★15
BUMPER
CHROME
★11
FUEL FILLER
TUBE
CHROME
METAL
EXHAUST TIPS
★15
BUMPER
CHROME
71
RIGHT FRONT
BUMPER BRACKET
GLOSS BLACK
75
RIGHT REAR
BUMPER BRACKET
GLOSS BLACK
70
LEFT FRONT
BUMPER BRACKET
GLOSS BLACK
76
LEFT REAR
BUMPER BRACKET
GLOSS BLACK
3
LEFT
BED SIDE
BODY COLOR
5
BED FRONT WALL
BODY COLOR
77
LEFT
REAR FENDER
BODY COLOR
4
RIGHT
BED SIDE
BODY COLOR
78
RIGHT
REAR FENDER
BODY COLOR
6
TAILGATE
BODY COLOR
152
HEADLIGHT LENS
CLEAR
152
HEADLIGHT LENS
CLEAR
STREET ROD
INTERIOR / CAB ASSEMBLY
10
FRONT SUSPENSION ASSEMBLY
6
Kit 7208 - Page 5
Kit 7208 - Page 8
STOCK SUSPENSION / EXHAUST ASSEMBLY
5
STOCK
FIRST
LAST
STREET ROD
STOCK
51
FRAME
SEMI GLOSS BLACK
55
EXHAUST SYSTEM
ALUMINUM
23
STEERING WHEEL
SEMI GLOSS BLACK
22
STEERING COLUMN
SEMI GLOSS BLACK
18
INTERIOR
TAN (GRAY)
52
REAR
AXLE ASSEMBLY
SEMI GLOSS BLACK
46
GAS TANK
GRAY
57
STEERING LINKAGE
SEMI GLOSS BLACK
56
FRONT AXLE
SEMI GLOSS BLACK
60
LEFT
FRONT SHOCK
SEMI GLOSS BLACK
61
RIGHT
FRONT SHOCK
SEMI GLOSS BLACK
54
REAR
WISHBONE
SEMI GLOSS BLACK
58
FRONT
SUSPENSION
SEMI GLOSS BLACK
53
REAR
AXLE BOTTOM
SEMI GLOSS BLACK
★19
INTERIOR DOOR
HANDLE
CHROME
★19
INTERIOR DOOR
HANDLE
CHROME
★9
DOOR HANDLE
CHROME
★17
REAR VIEW
MIRROR
CHROME
★10
WINDSHIELD WIPERS
CHROME
(WIPER BLADES SEMI GLOSS
BLACK)
★9
DOOR HANDLE
CHROME
★72
WINDSHIELD
CRANK
CHROME
★133
FRONT
DROP AXLE
CHROME
★132
FRONT
SHOCK
CHROME
★132
FRONT
SHOCK
CHROME
★20
WINDOW CRANK
CHROME
★25
GEARSHIFT
CHROME
★20
WINDOW CRANK
CHROME
24
BRAKE AND CLUTCH
PEDALS
SEMI GLOSS BLACK
21
DASHBOARD
BODY COLOR
DECAL
9 or 13
26
FIREWALL
BODY COLOR
1
CAB
BODY COLOR
151
WINDSHIELD
CLEAR
(TRIM SILVER)
150
BACK WINDOW
CLEAR
27
BATTERY
SEMI GLOSS
BLACK
*
*
*
*
*
WIPER ANGLE
ENGINE TO CHASSIS ASSEMBLY
7
RADIATOR / HOSE ASSEMBLY
8
GRILLE / FENDER TO FRAME ASSEMBLY
9
Kit 7208 - Page 6 Kit 7208 - Page 7
STOCK
STOCK
FIRST
68
STEERING BOX
SEMI GLOSS BLACK
29
RADIATOR
SEMI GLOSS BLACK
30
FAN SHROUD
SEMI GLOSS BLACK
48
RIGHT
UPPER RADIATOR HOSE
SEMI GLOSS BLACK
47
LEFT
UPPER RADIATOR HOSE
SEMI GLOSS BLACK
★121
'38 FORD GRILLE
CHROME
★131
RIGHT UPPER
RADIATOR HOSE
CHROME
★130
LEFT UPPER
RADIATOR HOSE
CHROME
★8
GRILLE
CHROME
★12
RADIATOR CAP
CHROME
103
GRILLE FENDER
PANEL
BODY COLOR
2
FENDER ASSEMBLY
BODY COLOR
BODY COLOR
TAN
28
GRILLE HOUSING
BODY COLOR
ENGINE TO CHASSIS ASSEMBLY
7
RADIATOR / HOSE ASSEMBLY
8
GRILLE / FENDER TO FRAME ASSEMBLY
9
Kit 7208 - Page 6 Kit 7208 - Page 7
STOCK
STOCK
FIRST
68
STEERING BOX
SEMI GLOSS BLACK
29
RADIATOR
SEMI GLOSS BLACK
30
FAN SHROUD
SEMI GLOSS BLACK
48
RIGHT
UPPER RADIATOR HOSE
SEMI GLOSS BLACK
47
LEFT
UPPER RADIATOR HOSE
SEMI GLOSS BLACK
★121
'38 FORD GRILLE
CHROME
★131
RIGHT UPPER
RADIATOR HOSE
CHROME
★130
LEFT UPPER
RADIATOR HOSE
CHROME
★8
GRILLE
CHROME
★12
RADIATOR CAP
CHROME
103
GRILLE FENDER
PANEL
BODY COLOR
2
FENDER ASSEMBLY
BODY COLOR
BODY COLOR
TAN
28
GRILLE HOUSING
BODY COLOR
INTERIOR / CAB ASSEMBLY
10
FRONT SUSPENSION ASSEMBLY
6
Kit 7208 - Page 5
Kit 7208 - Page 8
STOCK SUSPENSION / EXHAUST ASSEMBLY
5
STOCK
FIRST
LAST
STREET ROD
STOCK
51
FRAME
SEMI GLOSS BLACK
55
EXHAUST SYSTEM
ALUMINUM
23
STEERING WHEEL
SEMI GLOSS BLACK
22
STEERING COLUMN
SEMI GLOSS BLACK
18
INTERIOR
TAN (GRAY)
52
REAR
AXLE ASSEMBLY
SEMI GLOSS BLACK
46
GAS TANK
GRAY
57
STEERING LINKAGE
SEMI GLOSS BLACK
56
FRONT AXLE
SEMI GLOSS BLACK
60
LEFT
FRONT SHOCK
SEMI GLOSS BLACK
61
RIGHT
FRONT SHOCK
SEMI GLOSS BLACK
54
REAR
WISHBONE
SEMI GLOSS BLACK
58
FRONT
SUSPENSION
SEMI GLOSS BLACK
53
REAR
AXLE BOTTOM
SEMI GLOSS BLACK
★19
INTERIOR DOOR
HANDLE
CHROME
★19
INTERIOR DOOR
HANDLE
CHROME
★9
DOOR HANDLE
CHROME
★17
REAR VIEW
MIRROR
CHROME
★10
WINDSHIELD WIPERS
CHROME
(WIPER BLADES SEMI GLOSS
BLACK)
★9
DOOR HANDLE
CHROME
★72
WINDSHIELD
CRANK
CHROME
★133
FRONT
DROP AXLE
CHROME
★132
FRONT
SHOCK
CHROME
★132
FRONT
SHOCK
CHROME
★20
WINDOW CRANK
CHROME
★25
GEARSHIFT
CHROME
★20
WINDOW CRANK
CHROME
24
BRAKE AND CLUTCH
PEDALS
SEMI GLOSS BLACK
21
DASHBOARD
BODY COLOR
DECAL
9 or 13
26
FIREWALL
BODY COLOR
1
CAB
BODY COLOR
151
WINDSHIELD
CLEAR
(TRIM SILVER)
150
BACK WINDOW
CLEAR
27
BATTERY
SEMI GLOSS
BLACK
*
*
*
*
*
WIPER ANGLE
STREET ROD SUSPENSION ASSEMBLY
3
STREET ROD EXHAUST ASSEMBLY
4
FRONT / STAKE ASSEMBLY
11
REAR ASSEMBLY
12
Kit 7208 - Page 4
Kit 7208 - Page 9
STOCK
51
FRAME
SEMI GLOSS BLACK
106
LEFT
EXHAUST PIPE
STEEL
107
RIGHT
EXHAUST PIPE
STEEL
46
GAS TANK
GRAY
ALUMINUM
ALUMINUM
108
REAR DROP AXLE
SEMI GLOSS BLACK
135
REAR
AXLE BOTTOM
SEMI GLOSS BLACK
66
LEFT
TAILLIGHT BRACKET
GLOSS BLACK
67
RIGHT
TAILLIGHT BRACKET
GLOSS BLACK
★65
TAILLIGHT
HOUSING
CHROME
155
TAILLIGHT LENS
TRANSPARENT RED
★65
TAILLIGHT
HOUSING
CHROME
★14
HEADLIGHT
BUCKET
CHROME
★13
HEADLIGHT
BUCKET
CHROME
★122
HEADLIGHT SHELL
CHROME
★123
HEADLIGHT RIM
CHROME
★15
BUMPER
CHROME
★11
FUEL FILLER
TUBE
CHROME
METAL
EXHAUST TIPS
★15
BUMPER
CHROME
71
RIGHT FRONT
BUMPER BRACKET
GLOSS BLACK
75
RIGHT REAR
BUMPER BRACKET
GLOSS BLACK
70
LEFT FRONT
BUMPER BRACKET
GLOSS BLACK
76
LEFT REAR
BUMPER BRACKET
GLOSS BLACK
3
LEFT
BED SIDE
BODY COLOR
5
BED FRONT WALL
BODY COLOR
77
LEFT
REAR FENDER
BODY COLOR
4
RIGHT
BED SIDE
BODY COLOR
78
RIGHT
REAR FENDER
BODY COLOR
6
TAILGATE
BODY COLOR
152
HEADLIGHT LENS
CLEAR
152
HEADLIGHT LENS
CLEAR
STREET ROD
WHEEL ASSEMBLY
13
CAB / HOOD SIDE ASSEMBLY
14
STOCK ENGINE ASSEMBLY
2
Kit 7208 - Page 10
Kit 7208 - Page 3
REAR STOCK
FRONT STOCKSTREET ROD
STREET RODCAB TO FRAME
41
FAN BELT
SEMI GLOSS BLACK
42
FAN
SEMI GLOSS BLACK
50
GENERATOR
SEMI GLOSS BLACK
43
DISTRIBUTOR
SILVER
34
ENGINE FRONT
FLAT GREEN
79
RIGHT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
80
LEFT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
45
RIGHT
EXHAUST MANIFOLD
STEEL
44
LEFT
EXHAUST MANIFOLD
STEEL
★36
CARBURETOR
CHROME
33
CYLINDER HEAD
FLAT GREEN
33
CYLINDER HEAD
FLAT GREEN
35
INTAKE MANIFOLD
FLAT GREEN
39
REAR
FUEL PUMP HALF
ALUMINUM
37
AIR FILTER TOP
SEMI GLOSS BLACK
38
AIR FILTER
BOTTOM
SEMI GLOSS BLACK
40
FRONT
FUEL PUMP HALF
ALUMINUM
★120
HUB CAP
CHROME
★69
HUB CAP
CHROME
★69
HUB CAP
CHROME
113
OUTER WHEEL
RED
64
OUTER WHEEL
BODY COLOR
64
OUTER WHEEL
BODY COLOR
101
LEFT
HOOD SIDE
BODY COLOR
102
RIGHT
HOOD SIDE
BODY COLOR
114
INNER WHEEL
SEMI GLOSS BLACK
TIRE
TIRE
TIRE
59
FRONT
INNER WHEEL
SEMI GLOSS BLACK
74
REAR
INNER WHEEL
SEMI GLOSS BLACK
49
STARTER
SEMI GLOSS BLACK
RIGHT SIDE
STREET ROD ENGINE ASSEMBLY
1
HOOD / MIRROR / STAKE ASSEMBLY
15
FINAL ASSEMBLY
16
Kit 7208 - Page 2
Kit 7208 - Page 11
32
RIGHT
ENGINE HALF
FLAT GREEN
31
LEFT
ENGINE HALF
FLAT GREEN
★134
EDELBROCK
CYLINDER HEAD
CHROME
★124
HOOD
ORNAMENT
CHROME
★16
SIDE MIRROR
CHROME
112
RIGHT
STAKE SIDE
TAN
110
STAKE SIDE
FRONT
TAN
111
LEFT
STAKE SIDE
TAN
★125
INTAKE MANIFOLD
CHROME
★126
DUAL CARBURETORS
CHROME
105
LEFT
EXHAUST MANIFOLD
STEEL
104
RIGHT
EXHAUST MANIFOLD
STEEL
34
ENGINE FRONT
FLAT GREEN
79
RIGHT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
80
LEFT LOWER
RADIATOR HOSE
SEMI GLOSS BLACK
41
FAN BELT
SEMI GLOSS BLACK
42
FAN
SEMI GLOSS BLACK
50
GENERATOR
SEMI GLOSS BLACK
43
DISTRIBUTOR
SILVER
★128
FUEL PUMP
CHROME
★134
EDELBROCK
CYLINDER HEAD
CHROME
★129
FILLER TUBE
CHROME
★127
AIR CLEANERS
CHROME
BOTH ENGINES
STOCK
STOCK
★73
SPARE TIRE
HUB CAP
CHROME
63
SPARE TIRE
OUTER WHEEL
BODY COLOR
TIRE
62
SPARE TIRE
INNER WHEEL
BODY COLOR
★120
HUB CAP
CHROME
100
HOOD TOP
BODY COLOR
109
SURF BOARD
TAN
115
SPARE TIRE
COVER
BODY COLOR
7
HOOD
BODY COLOR
SEMI GLOSS
BLACK
49
STARTER
SEMI GLOSS BLACK
RIGHT SIDE
DECAL PLACEMENT
17
Semi Gloss Black
Steel
Flat Green
Gray
Silver
Gloss Red
Tan
Gloss Cream
Gloss Dark Blue
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Acier
Vert mat
Gris
Argent
Rouge brillant
Tan
Créme brillant
Bleu foncé brillant
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
'37 FORD PICKUP STREET ROD
2 'N 1
KIT 7208 85720800200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85720800200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2009. All rights reserved.
Kit 7208 - Page 12
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* REPEAT PROCEDURE
* R E P E T E Z L E P R O C E D E
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
``` ` ``
In 1937, for the first time, Ford
Trucks had their own styling which
was very distinctive from the Ford
car line. Design wise, Ford had defi-
nately stepped ahead of the compe-
tition with its new grille, split wind-
shield and completely redesigned cab.
Your Revell model features a stock flat
head V-8 or custom manifold with dual
carbs and high compression heads,
vintage truck wheels and tires or steel
wheels with dog dish hub caps, a '38
grille and hood, optional headlights,
wood stake sides, lowered suspen-
sion, dual exhaust and surf board.
Authentic decals for factory stock and
custom graphics are also included.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Revell 7208 User manual

Revell
Brand
Revell
Model
7208
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents