IDIS DA-TM4200 Technical Manual

DA-TM4200
Brand
IDIS
Model
DA-TM4200
Category
Camera mounting accessories
Type
Technical Manual
DA-TM4200 INSTALLATION MANUAL
This manual is intended for users of the DA-TM4200 wall mounting
bracket. It includes instructions for mounting the DA-TM4200 wall
mounting bracket to a wall.
• This bracket is intended to be used with a specic
model of camera. Do not use it with other models of
cameras except for those approved by the dealer or
distributor.
• This installation should be performed by a qualied
service personnel in conformance to all local codes.
• You may need to reinforce the wall. If the wall is not
strong enough to support the camera, the camera
may fall.
• Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1
Insert cables from external devices, network and
power adapter to the sponge and bracket.
2
Mount bracket to the wall by using the provided
anchors and screws.
Bracket
Wall Hole
Connect your camera to the bracket as follows:
3
Screw the camera body onto bracket.
Bracket
Camera
body
IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
4
Secure the top cover to the body by turning it colckwise.
Camera
body
Camera
Top Cover
5
Turn on power.
Dimension
Unit: mm (inch)
Ver.1.0
  • Page 1 1
  • Page 2 2

IDIS DA-TM4200 Technical Manual

DA-TM4200
Brand
IDIS
Model
DA-TM4200
Category
Camera mounting accessories
Type
Technical Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents